{"title":"Hyundai SX2 Kona","description":null,"products":[{"product_id":"atmospheric-and-recirculating-valve-for-hyundai-i30n-kona-n-and-veloster-n-fmdv20","title":"Atmospheric and Recirculating Valve for Hyundai i30N, Kona N, and Veloster N","description":"\u003cp align=\"center\"\u003e\u003cb\u003eThis part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eOur uprated valve for the Hyundai i30N, Kona N, and Veloster N has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, this valve can be used either as a \u003ca href=\"https:\/\/www.youtube.com\/watch?v=XmMZVDXS-Z0\u0026amp;t=1s\" target=\"_blank\"\u003efully atmospheric (blow off) valve\u003c\/a\u003e, or a recirculating valve - you choose!\u003c\/p\u003e\r\n\r\n\u003cp\u003eOur unrivalled design uses a boost to side entry on the valve meaning unlike our competitors the valve cannot lift under high or low boost applications. The advantage of this eliminates the need to change the valves internal spring rate to a higher tension when tuning the vehicle.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis part replaces OEM Part No. 282342-CTA4\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eUtilising world leading springs for more precise operation and consistency\u003c\/li\u003e\r\n\t\u003cli\u003eAll internal and external components have been made in the UK, ensuring top quality, and offering a valve with faster response times and longer service intervals\u003c\/li\u003e\r\n\t\u003cli\u003eThe piston uses heat stabilised Viton O-rings\u003c\/li\u003e\r\n\t\u003cli\u003eLubricated with high temperature \u003ca href=\"https:\/\/www.mobil1.co.uk\/\" target=\"_blank\"\u003eMobil1\u003c\/a\u003e grease to ensure a long life with minimal wear and very long service intervals\u003c\/li\u003e\r\n\t\u003cli\u003eA super durable and responsive aluminium piston\u003c\/li\u003e\r\n\t\u003cli\u003eFully \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Forge_Motorsport_Valve_Service_Kit--product--792.html\" target=\"_blank\"\u003eserviceable\u003c\/a\u003e and rebuildable in minutes\u003c\/li\u003e\r\n\t\u003cli\u003eAvailable in anodised black\u003c\/li\u003e\r\n\t\u003cli\u003eUnlike other valves on the market, ours produces no check engine lights (EML)\u003c\/li\u003e\r\n\t\u003cli\u003eCovered by the unique Forge Lifetime Warranty*\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_91647jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_89927jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis kit will include all the parts required for atmospheric or recirculating set up. \u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/4.jpg\"\u003e\u003c\/strong\u003e\u003cbr\u003e\r\n\u003cscript async charset=\"utf-8\" src=\"\/\/cdn.thinglink.me\/jse\/embed.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":47717599904085,"sku":"FMDV20-BLA","price":194.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_89927jpeg.webp?v=1787168722"},{"product_id":"induction-kit-for-hyundai-i30n-kona-n-and-veloster-n-fmindk28","title":"Induction Kit for Hyundai i30N, Kona N, and Veloster N","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eForge Motorsport are excited to present our industry leading intake for the Hyundai i30N, Kona N, and Veloster N. This aftermarket cold air intake system \u003cstrong\u003eimproves your Hyundai's airflow\u003c\/strong\u003e in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range \u003cstrong\u003ewithout any loss of low-end torque\u003c\/strong\u003e. The pipework is specifically designed to feed the turbo without interruption. The result of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the Hyundai’s 2.0 four pot engine.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_85627jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_85627jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_24085jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_24085jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_27640jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_27640jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_53784jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_53784jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eAs always filtration is important when developing an intake, so we once again turned to the industry leaders and Forge long term filtration partners \u003ca href=\"http:\/\/www.pipercross.net\/\" target=\"_blank\"\u003ePipercross\u003c\/a\u003e. With over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in our ‘Hi-Flow’ range. The large filter provided \u003cstrong\u003eflows 60% more air than the stock filter.\u003c\/strong\u003e (Replacement filters can be found \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/search?q=fmindk28\" target=\"_blank\"\u003ehere\u003c\/a\u003e). The intake is finished off with our unique black thermal powder coating. This kit comes with Forge’s usual detailed \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/?download_id=541\" target=\"_blank\"\u003efitting guide\u003c\/a\u003e to help make installation as easy as possible.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_63785jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_63785jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_72700jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_72700jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_95794jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_95794jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eHyundai boast figures of 275bhp and 278lb.ft on their standard vehicle. When we ran our CAT backed performance exhaust development vehicle on the dyno with this intake it reached figures of \u003cstrong\u003e296bhp and 310lb.ft!\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"\/userfiles\/images\/website_imgs\/FMINDK28\/FMINDK28-INTAKE-DYNOGRAPH.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"\" class=\"center-block\" download=\"\" src=\"\/userfiles\/images\/website_imgs\/FMINDK28\/FMINDK28-INTAKE-DYNOGRAPH.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eInterestingly there has been lots of divided opinions about our intake requiring a heat shield. Testing took place with the bonnet shut and replicated wind speeds of around 70MPH. Intake temperatures were logged and monitored along with thermal images taken,. \u003cstrong\u003eDuring this testing, we did not see the inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e⭐ Once again, Forge Motorsport knock it out of the park with superb quality and super fast delivery. Highly Recommended ⭐\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eIn the Box:\u003cbr\u003e\r\n1 x Black Alloy Hard Pipe\u003cbr\u003e\r\n1 x Pipercross Filter\u003cbr\u003e\r\n1 x Valve Silicon Joiner\u003cbr\u003e\r\n2 x Hose clamps\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\" style=\"width: 600px; height: 39px;\"\u003e\u003c\/p\u003e\r\n\r\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h2\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Uprated_Intercooler_for_Hyundai_i30N--product--1713.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Uprated_Intercooler_for_Hyundai_i30N_92390jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Uprated_Intercooler_for_Hyundai_i30N--product--1713.html\" target=\"_blank\"\u003eIntercooler\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit--product--1832.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit_59933jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit--product--1832.html\" target=\"_blank\"\u003eCoolant Hoses\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_Mk3_PFLVeloster_N_Turbo_Inlet_Adaptor--product--1790.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_58589jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_Mk3_PFLVeloster_N_Turbo_Inlet_Adaptor--product--1790.html\" target=\"_blank\"\u003eTurbo Inlet Adaptor\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Blue Hoses \/ With Gold Tape \/ Foam","offer_id":47717602099541,"sku":"FMINDK28-BLU-GW-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Blue Hoses \/ Without Gold Tape \/ Foam","offer_id":47717602132309,"sku":"FMINDK28-BLU-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Black Hoses \/ With Gold Tape \/ Foam","offer_id":47717602165077,"sku":"FMINDK28-BLA-GW-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Black Hoses \/ Without Gold Tape \/ Foam","offer_id":47717602197845,"sku":"FMINDK28-BLA-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hoses \/ With Gold Tape \/ Foam","offer_id":47717602230613,"sku":"FMINDK28-PER-GW-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hoses \/ Without Gold Tape \/ Foam","offer_id":47717602263381,"sku":"FMINDK28-PER-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Red Hoses \/ With Gold Tape \/ Foam","offer_id":47717602296149,"sku":"FMINDK28-RED-GW-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Red Hoses \/ Without Gold Tape \/ Foam","offer_id":47717602328917,"sku":"FMINDK28-RED-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Blue Hoses \/ Without Gold Tape \/ Pleated","offer_id":47717602361685,"sku":"FMINDK28-BLU-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Black Hoses \/ Without Gold Tape \/ Pleated","offer_id":47717602394453,"sku":"FMINDK28-BLA-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Black Hoses \/ With Gold Tape \/ Pleated","offer_id":47717602427221,"sku":"FMINDK28-BLA-GW-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Red Hoses \/ Without Gold Tape \/ Pleated","offer_id":47717602459989,"sku":"FMINDK28-RED-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Red Hoses \/ With Gold Tape \/ Pleated","offer_id":47717602492757,"sku":"FMINDK28-RED-GW-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hoses \/ Without Gold Tape \/ Pleated","offer_id":47717602525525,"sku":"FMINDK28-PER-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hoses \/ With Gold Tape \/ Pleated","offer_id":47717602558293,"sku":"FMINDK28-PER-GW-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Blue Hoses \/ With Gold Tape \/ Pleated","offer_id":47717602591061,"sku":"FMINDK28-BLU-GW-PLE","price":336.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_85627jpeg.webp?v=1787168722"},{"product_id":"hyundai-i30nveloster-nkona-n-dual-catch-can-and-expansion-tank-fmct5","title":"Hyundai i30N\/Veloster N\/Kona N Dual Catch Can and Expansion Tank","description":"\u003cp\u003e\u003cstrong\u003eHighlights\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eA drain plug for ease of emptying\u003c\/li\u003e\r\n\t\u003cli\u003eCoolant level indicator\u003c\/li\u003e\r\n\t\u003cli\u003eIntegrated dipstick’s for simple level inspection\u003c\/li\u003e\r\n\t\u003cli\u003eCNC machined anodised coolant cap cover\u003c\/li\u003e\r\n\t\u003cli\u003ePremium quality stainless steel reinforced oil resistant hoses with black external braiding\u003c\/li\u003e\r\n\t\u003cli\u003eInner tube is constructed from anti-static smooth fuel resistant nitrile rubber\u003c\/li\u003e\r\n\t\u003cli\u003eTemperature Range: -54°C to +150°C (-65°F to 300°F)\u003c\/li\u003e\r\n\t\u003cli\u003eThe engine cover can still be fitted after installation\u003c\/li\u003e\r\n\t\u003cli\u003eInstallation is straight forward with all necessary fittings and Forge detailed instructions included.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eHere we present FMCT5, a twin catch can and coolant expansion tank system for the Hyundai i30N, Veloster N, and Kona N. This design has been subject to a\u003cstrong\u003e vast amount of developmen\u003c\/strong\u003et and is a one of a kind product in the marketplace. \u003cstrong\u003eThis part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe FMCT5 is a direct replacement for the OE coolant expansion tank. The CAD laser cut alloy construction is \u003cstrong\u003eskilfully welded at Forge UK HQ\u003c\/strong\u003e. The expansion tank has a level indicator inside the filler neck, to make topping up easier, we have also machined a cap cover that slots over the top of the OEM cap to add to the \u003cstrong\u003epremium look.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Dual_Catch_Can_and_Expansion_Tank_89883jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThe twin catch can system is the definitive solution to effectively reduce sludge and carbon build up, in turn allowing the engine to both \u003cstrong\u003ebreathe and perform more efficiently\u003c\/strong\u003e. It can therefore be viewed as a \u003cstrong\u003egenuine performance enhancing product.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Dual_Catch_Can_and_Expansion_Tank_92119jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eOur system filters both PCV and intake breather systems to help keep your engine clean from harmful contaminants, including oil deposits, unused fuel vapours and moisture, which would ordinarily make their way back through to the inlet of the engine.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Dual_Catch_Can_and_Expansion_Tank_60154jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThere is a dip stick for each tank to measure the amount of deposit caught. This opening can also be used to pump out the captured contaminants or alternately you can use the drain plugs at the bottom of the tanks - the choice is yours!\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eAs with all Forge Motorsport products we have used superior braided hoses which are internally constructed from anti-static smooth fuel resistant nitrile rubber. This is combined with an outer cover made from reinforced stainless-steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be \u003cstrong\u003eresistant to both pressure expansion and vacuum collapse\u003c\/strong\u003e, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F).\u003c\/p\u003e\r\n\r\n\u003cp\u003eFMCT5 has now been developed to be compatible with Hyundai Veloster N and Kona N, as well as still fitting the i30N Mk3, and Mk3.5 (facelift). This product is available in our stealthy textured black powder coat finish.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h2\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30NVeloster_N_Boost_pipe--product--1882.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Boost_pipe_68737jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30NVeloster_N_Boost_pipe--product--1882.html\" target=\"_blank\"\u003eBoost Pipes\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Uprated_Intercooler_for_Hyundai_i30N--product--1713.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Uprated_Intercooler_for_Hyundai_i30N_92390jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Uprated_Intercooler_for_Hyundai_i30N--product--1713.html\" target=\"_blank\"\u003eIntercooler\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Oil_Cooler_Kit_for_Hyundai_i30N--product--1859.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_i30NVeloster_N_62871jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Oil_Cooler_Kit_for_Hyundai_i30N--product--1859.html\" target=\"_blank\"\u003eOil Cooler\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cul\u003e\r\n\u003c\/ul\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":47717674811733,"sku":"FMCT5-BLA","price":437.74,"currency_code":"GBP","in_stock":true},{"title":"Alloy","offer_id":47717674844501,"sku":"FMCT5-ALL","price":437.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_i30NVeloster_N_Dual_Catch_Can_and_Expansion_Tank_92119jpeg.webp?v=1787168815"},{"product_id":"fmindk28-replacement-foam-filter-fmindk28rf","title":"FMINDK28 Replacement Foam Filter","description":"\u003cp\u003eThis is a replacment foam filter for the FMINDK28 induction kit that is for the Hyundai i30N\/Veloster N.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\u003ciframe allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/V19THnWIeok\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\u003ciframe allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/r08Wyh2WSoI\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":47717687886165,"sku":"FMINDK28RF","price":79.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/FMINDK28_Replacement_Filter_27612jpeg.webp?v=1787168850"},{"product_id":"fmindk28-replacement-pleated-filter-fmindk28rc","title":"FMINDK28 Replacement Pleated Filter","description":"\u003cp\u003eThis is a replacment pleated filter for the FMINDK28 induction kit that is for the Hyundai i30N\/Veloster N.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eThe filter is 260mm high, 190mm wide at the neck, 120mm wide at the end cap. The filter neck has an inner diameter of 101mm.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\u003ciframe allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/V19THnWIeok\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\u003ciframe allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/r08Wyh2WSoI\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":47717689327957,"sku":"FMINDK28RC","price":78.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/FMINDK28_Replacement_Pleated_Filter_27811jpeg.webp?v=1787168834"},{"product_id":"hyundai-i30n-mk35-facelift-amp-kona-n-turbo-inlet-adaptor-fmtia10","title":"Hyundai i30N MK3.5 Facelift \u0026 Kona N Turbo Inlet Adaptor","description":"\u003cul\u003e\r\n\t\u003cli\u003eManufactured from\u003cstrong\u003e 6082\u003c\/strong\u003e aerospace grade aluminium\u003c\/li\u003e\r\n\t\u003cli\u003eBlack anodised for ultimate protection and durability\u003c\/li\u003e\r\n\t\u003cli\u003eIncreased capacity of over \u003cstrong\u003e150%\u003c\/strong\u003e\n\u003c\/li\u003e\r\n\t\u003cli\u003eNo engine check lights (EML)\u003c\/li\u003e\r\n\t\u003cli\u003ePerfect fit with our \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003einduction kit\u003c\/a\u003e\n\u003c\/li\u003e\r\n\t\u003cli\u003eIncreased air flow\u003c\/li\u003e\r\n\t\u003cli\u003eMade in the UK\u003c\/li\u003e\r\n\t\u003cli\u003eLifetime warranty\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\" style=\"float: left;\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color:#FF0000;\"\u003e\u003cstrong\u003eTHIS WILL ONLY FIT 4\" INTAKES - THIS WILL \u003cu\u003eNOT\u003c\/u\u003e FIT THE STOCK AIRBOX.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the MK3.5 i30N. After investigation we found the new turbo to be larger on the latest MK3.5 I30N giving even more reason to have this superb product as the newly refreshed design needs to flow even more air than its predecessor. After stage one or two tunes the performance yields are even greater than the previous model with even better driving response and improved higher end BHP gains.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_53439jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_58589jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_84878jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_adaptor_91653jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eRedesigned and developed by our highly skilled team on Solidworks CAD system the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit the engines performance. With one of the weak links on the i30N and intake system being the restrictive aluminium inlet pipe we found something more was needed on stage 1 and 2 tuned vehicles. You cannot go wrong with Forge Motorsport hardware on your tuned Hyundai, the results speak for themselves.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eMated to our 4” intake and high performance filter (\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003eFMINDK28\u003c\/a\u003e) \u003cstrong\u003ethe gain from the turbo adaptor alone was 10BHP\u003c\/strong\u003e, and, along with a gain in torque, it really \u003cstrong\u003etransforms your driving experience\u003c\/strong\u003e. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/imgonline-com-ua-twotoone-0qyIxfq1D8a1.jpg\"\u003e           \u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003eDesigned in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/DSC02882.JPG\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eTesting was completed on a Maha independent dyno\u003c\/strong\u003e, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all of their engine calibration and dyno testing.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMTIA10\/FMTIA10-i30N-FL.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eThe Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than \u003cstrong\u003e150%\u003c\/strong\u003e over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAs with all Forge motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_67898jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_95951jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_77678jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_25047jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eWill this fit other intakes? The answer is \u003cstrong\u003eyes\u003c\/strong\u003e,\u003cstrong\u003e \u003c\/strong\u003eit will fit other manufacturers intakes that have an inlet pipe of 102mm (4”). This will not fit the OEM.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis is a simple installation and a modification that releases even more power from the Hyundai`s motor and fitting takes typically around 45 minutes and includes a full set of comprehensive \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/?download_id=544\" target=\"_blank\"\u003einstallation instructions.\u003c\/a\u003e\u003cbr\u003e\r\n\u003cscript async charset=\"utf-8\" src=\"\/\/cdn.thinglink.me\/jse\/embed.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e\r\n\u003cgdiv\u003e\u003c\/gdiv\u003e","brand":"Forge Motorsport","offers":[{"title":"Black Hose","offer_id":47717743133013,"sku":"FMTIA10-BKH","price":129.91,"currency_code":"GBP","in_stock":true},{"title":"Blue Hose","offer_id":47717743165781,"sku":"FMTIA10-BH","price":129.91,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hose","offer_id":47717743198549,"sku":"FMTIA10-PB","price":129.91,"currency_code":"GBP","in_stock":true},{"title":"Red Hose","offer_id":47717743231317,"sku":"FMTIA10-RH","price":129.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_53439jpeg.webp?v=1787168909"},{"product_id":"boost-pipe-for-the-kona-n-hyundai-i30n-mk35-facelift-and-veloster-n-facelift-fmbp7","title":"Boost Pipe for the Kona N, Hyundai i30N MK3.5 Facelift, and Veloster N Facelift","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color:#FF0000;\"\u003e\u003cstrong\u003eThis will NOT work with the OEM intercooler. This product will only work with aftermarket intercoolers with an outlet size of 63-67mm (Cold Side). \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color:#FF0000;\"\u003e\u003cstrong\u003eIt works flawlessly with our \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift--product--2105.html\"\u003eHyundai i30N MK3.5 Intercooler\u003c\/a\u003e, \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_Veloster_N_Facelift_Intercooler_Including_DCT--product--2112.html\"\u003eHyundai Veloster N Facelift Intercooler (including DCT)\u003c\/a\u003e, and our \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_Hyundai_Kona_N--product--2202.html\"\u003eHyundai Kona N Intercooler\u003c\/a\u003e. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eSupplied with a durable black powder coated finish\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eMinimal airflow disruption\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eIncreased diameter giving increased flow compared to OEM\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eMandrel bent single piece aluminium pipework\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eCNC machined billet couplers\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eNo engine check lights (EML)\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eLifetime warranty\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eAfter already developing many performance upgrades for the Hyundai I30N \u0026amp; Veloster N, the Forge Motorsport engineers have found another area for improvement on the Hyundai’s hot hatch. This time it is the boost pipe which runs from the outlet of the intercooler, to the throttle body (cold side).\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhen looking at the OE hard pipe it was clear to see there was room for improvement. We increased the bore diameter by 20%, which in testing resulted in a faster spool up and a crisper power delivery. We developed a \u003cstrong\u003e66mm internal diameter\u003c\/strong\u003e mandrel bent alloy hard pipe to compliment the transition of smooth air from the cold side of the intercooler, which also matched the size of the OEM throttle body perfectly. Accompanied with fluro lined high quality silicone joiners, this upgrade is the perfect addition to any highly tuned engine.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_31461jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_77250jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_40183jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eAlloy billet CNC machined bosses are welded in-house to the mandrel bent pipe work by our highly skilled fabricators, so that all the original attachments fit perfectly. When compared to the OE hose the improvements are clear to see, the inlet bore diameter has now been increased from 55mm to 66mm internal diameter.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_49614jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_13356jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eAn increase in diameter of the Forge pipe work allows for a greater air flow, which in-turn, maximises the volume of air being forced into the engine. This has the benefit of \u003cstrong\u003eimproving both performance and efficiency,\u003c\/strong\u003e especially on vehicles running aftermarket software. This is a must have product for anyone trying to achieve the maximum performance from their I30N\/Veloster N\/Kona N.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe have also incorporated a 1\/8\u003csup\u003eth\u003c\/sup\u003e NPT water meth\/nitrous boss into the design that is housed directly in front of the throttle body for maximum efficiency. This assists tuners and owners in hot climates to keep inlet air temperatures on the safer side while pushing the 2.0 Hyundai engine to its limits, for a maximum power output.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhy not add \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Gold_Heat_Resistant_Wrap--product--1697.html\" target=\"_blank\"\u003egold tape\u003c\/a\u003e to the alloy pipe to further reflect any heat soak from the engine and keep inlet charge temperatures as low as possible. The Gold tape comes on a 5metre roll, allowing you to apply it to your Forge Motorsport product.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis product is designed, developed, and manufactured entirely in Great Britain and is covered by our worldwide lifetime warranty\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h1\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1712.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_24245jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eOur \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i20N_Atmospheric_and_Recirculating_Dump_Valve--product--2117.html\" target=\"_blank\"\u003euprated valve\u003c\/a\u003e for the Hyundai i20N, Kona N, and the Veloster N Line has been \u003cb\u003eexpertly manufactured\u003c\/b\u003e and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, this valve can be used either as a fully atmospheric (blow off) valve, or a recirculating valve!\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/MultiApplication_Oil_Cap_18657jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThis billet aluminium \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003eoil cap\u003c\/a\u003e will replace your OEM one, leaving your engine bay with a premium and high quality aesthetic. \u003cspan style=\"word-spacing: normal;\"\u003eThis cap is available in a choice of body colour (black or polished) and a choice of cap top insert (black or polished). \u003cb\u003eThis perfectly compliments your i30N!\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_53439jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThe \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003eFMTIA10\u003c\/a\u003e is proven to benefit the engines performance. With one of the weak links on the i30N and intake system being the restrictive aluminium inlet pipe we found something more was needed on stage 1 and 2 tuned vehicles. \u003cstrong\u003eThe results speak for themselves.\u003c\/strong\u003e\u003cspan style=\"word-spacing: normal;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":47717765972309,"sku":"FMBP7","price":195.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_31461jpeg.webp?v=1787168964"},{"product_id":"oil-cooler-for-hyundai-kona-n-fmoc14","title":"Oil Cooler for Hyundai Kona N","description":"\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eDeveloped, designed, and influenced from our \u003cstrong\u003edirect involvement with BTCC\u003c\/strong\u003e and success with the Hyundai i30N, we are proud to release an oil cooling solution for the Hyundai Kona N.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis oil cooler radiator is lifted straight from our motorsport department, so we know that this product \u003cstrong\u003eperforms well, \u003c\/strong\u003eand has been proven in several race events and winning vehicles over the past years. The cores are durable enough to last full race seasons and are \u003cstrong\u003eperfect for fast road and track use\u003c\/strong\u003e. The cooler has now also been utilised in both of our other Hyundai oil cooling solutions and cleverly redesigned for a 100% plug and play solution for the Kona N.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_76737jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_27563jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_85258jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eDuring our time developing \u003cstrong\u003eworld leading products \u003c\/strong\u003efor the Kona N, we found a significant flaw with the vehicle, especially when tuned, just as we did with the I30N. Oil temperatures can climb to dangerous levels when on track or when driven hard in hotter climates. Rising oil temperatures will result in only one outcome: a reduction of sufficient lubrication of your engines internal components, which, in due course, can potentially lead to engine damage.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe saw oil temperatures \u003cstrong\u003ereduce significantly \u003c\/strong\u003eduring the development of this product when locating the oil cooler heat exchanger at the front of the vehicle’s radiator grill, this allowed for superior air flow. FMOC14 is a must-have product for the keen driver to protect their vehicles longevity, and perform safely and reliably.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_53417jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_15880jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_51588jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eUnlike many oil cooler kits on the market, \u003cstrong\u003eFMOC14 keeps the factory oil to water cooler in position \u003c\/strong\u003e- this essentially doubles your engines oil cooling. This product is not to be confused with a universal oil cooler, FMOC14 has a laser cut aluminium bracket which makes for perfect fitment to the Kona N. The kit is completely bespoke for this vehicle, with perfect length braided oil lines and our intelligent sandwich plate design making for a straightforward installation. The oil cooler is also designed to be mounted in the most efficient way possible as shown in the diagram below. This is to avoid oil cavitation which can also in some cases lead to potential engine damage over a long period of time.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/Products\/FMOC11\/OilCooler-Orientation-FMOC11.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eManufactured in Gloucester, UK,\u003c\/strong\u003e FMOC14 is made to the uppermost standard and is backed up by the Forge Motorsport\u003cstrong\u003e lifetime warranty.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThe kit comes with the following:\u003c\/strong\u003e\u003cbr\u003e\r\n1x Forge Aluminium sandwich plate\u003cbr\u003e\r\n1x Twin pass oil cooler \u003cbr\u003e\r\n4x M6x20 fasteners\u003cbr\u003e\r\n4x M6 washers\u003cbr\u003e\r\n2x Oil lines \u003cbr\u003e\r\n4x M6 Rubber Riv nuts\u003cbr\u003e\r\n1x M20x1.5 adaptor\u003cbr\u003e\r\n1x weather strip\u003cbr\u003e\r\nAll the fixings required and a comprehensive fitting guide\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h1\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1712.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_24245jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eOur \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i20N_Atmospheric_and_Recirculating_Dump_Valve--product--2117.html\" target=\"_blank\"\u003euprated valve\u003c\/a\u003e for the Hyundai i20N, Kona N, and the Veloster N Line has been \u003cb\u003eexpertly manufactured\u003c\/b\u003e and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, this valve can be used either as a fully atmospheric (blow off) valve, or a recirculating valve!\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/MultiApplication_Oil_Cap_18657jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThis billet aluminium \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003eoil cap\u003c\/a\u003e will replace your OEM one, leaving your engine bay with a premium and high quality aesthetic. \u003cspan style=\"word-spacing: normal;\"\u003eThis cap is available in a choice of body colour (black or polished) and a choice of cap top insert (black or polished). \u003cb\u003eThis perfectly compliments your i230N!\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_53439jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThe \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003eFMTIA10\u003c\/a\u003e is proven to benefit the engines performance. With one of the weak links on the i30N and intake system being the restrictive aluminium inlet pipe we found something more was needed on stage 1 and 2 tuned vehicles. \u003cstrong\u003eThe results speak for themselves.\u003c\/strong\u003e\u003cspan style=\"word-spacing: normal;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Raw","offer_id":47717766299989,"sku":"FMOC14-RAW","price":512.34,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":47717766365525,"sku":"FMOC14-BLACK","price":512.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Oil_Cooler_for_Hyundai_Kona_N_27563jpeg.webp?v=1787168969"},{"product_id":"intercooler-for-hyundai-kona-n-fmint29","title":"Intercooler for Hyundai Kona N","description":"\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eGains of 21BHP\u003c\/li\u003e\r\n\t\u003cli\u003eIncrease of 28NM of torque\u003c\/li\u003e\r\n\t\u003cli\u003e83% more volume over OEM\u003c\/li\u003e\r\n\t\u003cli\u003eBar and plate design\u003c\/li\u003e\r\n\t\u003cli\u003eDesigned and manufactured in the UK\u003c\/li\u003e\r\n\t\u003cli\u003eLifetime warranty\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eFollowing the success of our performance enhancing products for the Hyundai MK3 i30N and Veloster N, it was only obvious we should further develop on another of Hyundai’s popular performance N platforms, the Hyundai Kona N. Due to the difference in crash bar design, and following intensive testing, we found that, unlike the i30N, a stepped core was not the best performing intercooler during testing, neither would it offer to be a completely reversible plug and play solution.\u003c\/p\u003e\r\n\r\n\u003cp\u003eIn the development stages, our engineers used their knowledge and sheet metal expertise to help \u003cstrong\u003eimprove vital airflow \u003c\/strong\u003ethrough the bar and plate core by hand forming alloy sheet metal and the necessary brackets to mount the \u003cstrong\u003e83% larger volume intercooler \u003c\/strong\u003ein the OE position. This is the ideal location with a frontal surface area increase of over 27%, and has no detriment to any other of the vehicles cooling components. The development team also created a hand fabricated ducting system that has been skilfully integrated into this superior design, to ensure as much air as possible passes through the face of the intercooler.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_Hyundai_Kona_N_69244jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_Hyundai_Kona_N_42021jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_Hyundai_Kona_N_12472jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eThe inlet and outlet sizes have been \u003cstrong\u003eincreased in diameter to 64mm\u003c\/strong\u003e, giving an increase of \u003cstrong\u003e27% more volume\u003c\/strong\u003e over the intercooler OEM boost tract to give improved flow. The development team also added a custom hard pipe, increasing the diameter to 64mm, up from the factory 50mm. This replaces the stock factory pipe on the hot side to ensure this package gives you all you need for \u003cstrong\u003emaximum performance gains \u003c\/strong\u003eon high levels of tune.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe boost pipe and intercooler come in our standard black textured finish powder coat for maximum longevity. If you are looking to enhance this performance package, we would recommend adding our cold side boost pipe \u003cstrong\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Boost_Pipe_for_the_Kona_N_Hyundai_i30N_MK35_Facelift_and_Veloster_N_Facelift--product--2156.html\"\u003eFMBP7\u003c\/a\u003e\u003c\/strong\u003e to achieve an even more elevated performance experience. \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003ch3 style=\"text-align: center;\"\u003e\u003cstrong\u003eDyno Testing\u003c\/strong\u003e\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWith Hyundai using the MK3.5 i30N engine, and them re-developing the turbo charger to run more boost with a larger flow than the previous generation, there is even more reason to replace this restrictive OEM intercooler with the larger Forge Motorsport item.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/HyundaiKonaN-Dyno2_WEB.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/HyundaiKonaN-Dyno3_WEB.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eThe development vehicle used for this product already had a stage 1 ECU calibration from Courtney Sport, and was fitted with the Forge Motorsport intake (\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003eFMINDK28\u003c\/a\u003e) and turbo inlet adaptor (\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003eFMTIA10\u003c\/a\u003e). The results below show the vehicles power output before the Forge Motorsport intercooler was installed, using the OEM item the results were still impressive, however after a few pulls the tuned engine did start to struggle keeping the inlet air temperatures low.\u003c\/p\u003e\r\n\r\n\u003cp\u003eDuring our \u003cstrong\u003eextensive testing\u003c\/strong\u003e, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C), we then did a dyno pull from this point. In doing this, it gives a more consistent result and reflects real-world driving conditions more accurately.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTesting was completed using \u003ca href=\"https:\/\/www.performanceremap.co.uk\/\" target=\"_blank\"\u003ePerformance Remap\u003c\/a\u003e in Gloucester with their VTEC 4-wheel drive dynamometer, this was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see on the third run, as the inlet air temperature starts to rise, BHP output was measured at \u003cstrong\u003e348.3HP\u003c\/strong\u003e with \u003cstrong\u003e459 NM of engine torque.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_Hyundai_Kona_N_23895jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_Hyundai_Kona_N_59492jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eThe new addition of the Forge Motorsport intercooler made a huge difference to the vehicles power output and continued to keep the inlet air temps at around 27°C, with \u003cstrong\u003egains of 21 BHP and 28 NM of torque\u003c\/strong\u003e at peak, along with a significant increase from 3000 RPM, the performance gains can be felt when driving this vehicle.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAfter more than six pulls on the dyno, we still had safe IATs, and the Forge Motorsport intercooler gave results of 27°C, nearly halving the factory’s intercooler intake temps from 48°C. These tests took place in relatively cold conditions, with an ambient dyno cell temperature of 20°C, proving how inefficient the stock intercooler is.\u003cstrong\u003e In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance\u003c\/strong\u003e. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_Hyundai_Kona_N_84968.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis intercooler combined with our intake, and a quality aftermarket cat back exhaust with factory software will deliver you unparalleled levels of performance.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThe Forge Motorsport front mount intercooler has all the necessary hardware to install the kit in approximately 3 hours depending on competency and tools available.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003ch3 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h3\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Boost_Pipe_for_the_Kona_N_Hyundai_i30N_MK35_Facelift_and_Veloster_N_Facelift--product--2156.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_31461jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Boost_Pipe_for_the_Kona_N_Hyundai_i30N_MK35_Facelift_and_Veloster_N_Facelift--product--2156.html\" target=\"_blank\"\u003eBoost Pipes\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Oil_Cooler--product--2106.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30N_MK35_Facelift_Oil_Cooler_43693jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Oil_Cooler--product--2106.html\" target=\"_blank\"\u003eOil Cooler\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_53439jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003e\u003cspan style=\"word-spacing: normal;\"\u003eTurbo Inlet Adaptor\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":47717782913365,"sku":"FMINT29","price":599.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Intercooler_for_Hyundai_Kona_N_42021jpeg.webp?v=1787169006"},{"product_id":"ast-lowering-springs-for-hyundai-kona-electric-65-4kwh-218pk-160kw-08-2023-front-30-rear-30","title":"AST Lowering Springs For HYUNDAI KONA (SX2) SUV ELECTRIC 65.4kWh\/218PK\/160kW 08\/2023 - , Front 30 , Rear 30","description":"\u003cp\u003e\u003cspan style=\"font-size:11pt;font-family:Calibri,sans-serif;\"\u003eSet of AST Lowering Springs, cold-coiled on the best Wafios coiling machines. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size:11pt;font-family:Calibri,sans-serif;\"\u003eSet of AST Lowering Springs to lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. Cold-coiled on the best Wafios coiling machines. Lifetime warranty against breaking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size:11pt;font-family:Calibri,sans-serif;\"\u003eThe AST Lowering springs offer a solution to reduce your vehicle’s center of gravity while preserving the comfort you’re accustomed to from the original equipment manufacturer (OEM) springs. These springs serve as a direct replacement for your OEM springs and have been developed especially for each vehicle specific. Crafted from premium materials using the best Wafios coiling machines. Their progressive design strikes the perfect balance between lowering your ride and enhancing performance. With a broad range of applications, spanning over 2500 different vehicle models from 1966 to the present day, you can trust these springs to suit your needs. Plus, these springs come backed by a lifetime warranty against breaking, ensuring your peace of mind as you hit the road.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size:11pt;font-family:Calibri,sans-serif;\"\u003eSet of AST Lowering Springs to lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e","brand":"AST","offers":[{"title":"Default Title","offer_id":51739062960469,"sku":"AST-ASTLS-24-049","price":234.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/AST_ALS_Lowering_Spring_kits_91bfee8c-1a57-4137-a9d7-00f91faca7aa.webp?v=1787237727"},{"product_id":"ast-lowering-springs-for-hyundai-kona-1-6t-gdi-hev-hybrid-fwd-04-2023-front-30-rear-25","title":"AST Lowering Springs For HYUNDAI KONA (SX2) SUV 1.6T - GDi HEV HYBRID (FWD) 04\/2023 - , Front 30 , Rear 25","description":"\u003cp\u003e\u003cspan style=\"font-size:11pt;font-family:Calibri,sans-serif;\"\u003eSet of AST Lowering Springs, cold-coiled on the best Wafios coiling machines. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size:11pt;font-family:Calibri,sans-serif;\"\u003eSet of AST Lowering Springs to lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. Cold-coiled on the best Wafios coiling machines. Lifetime warranty against breaking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size:11pt;font-family:Calibri,sans-serif;\"\u003eThe AST Lowering springs offer a solution to reduce your vehicle’s center of gravity while preserving the comfort you’re accustomed to from the original equipment manufacturer (OEM) springs. These springs serve as a direct replacement for your OEM springs and have been developed especially for each vehicle specific. Crafted from premium materials using the best Wafios coiling machines. Their progressive design strikes the perfect balance between lowering your ride and enhancing performance. With a broad range of applications, spanning over 2500 different vehicle models from 1966 to the present day, you can trust these springs to suit your needs. Plus, these springs come backed by a lifetime warranty against breaking, ensuring your peace of mind as you hit the road.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size:11pt;font-family:Calibri,sans-serif;\"\u003eSet of AST Lowering Springs to lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003eNot suitable for 4WD (four-wheel drive) cars.\u003c!--ast-fitment-notes--\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eNot suitable for 4WD (four-wheel drive) cars.\u003c\/li\u003e\u003c\/ul\u003e","brand":"AST","offers":[{"title":"Default Title","offer_id":51739062993237,"sku":"AST-ASTLS-24-048","price":195.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/AST_ALS_Lowering_Spring_kits_6c2ee352-877e-4ac1-b6bd-5e8ca91186d1.webp?v=1787237726"},{"product_id":"eibach-pro-kit-for-hyundai-kona-n-line-cuv-fwd-sx2-16l-turbo-e10-42-064-01-22","title":"Eibach PRO-KIT for Hyundai Kona N-Line CUV FWD SX2 1.6L Turbo (E10-42-064-01-22)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eHigh Performance Handling and Aggressive Good Looks.\u003c\/li\u003e \u003cli\u003eLower Center of Gravity.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster\u003c\/li\u003e \u003cli\u003eProgressive Spring Design for Excellent Ride Quality.\u003c\/li\u003e \u003cli\u003eFront: - 40.64mm\u003c\/li\u003e \u003cli\u003eRear: - 35.56mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606772248917,"sku":"E10-42-064-01-22","price":381.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e10420640122-konanline-1.webp?v=1787172743"},{"product_id":"eibach-pro-kit-for-hyundai-kona-sx2-10-t-gdi-hybrid-48v-16-t-gdi-4wd-0423-e10-42-062-02-22","title":"Eibach Pro-Kit for HYUNDAI KONA (SX2) 1.0 T-GDI Hybrid 48V, 1.6 T-GDI 4WD 04.23 - (E10-42-062-02-22)","description":"\u003cp\u003eThe Eibach Pro-Kit is an effective solution to enhance the driving dynamics of your production vehicle. Lowering your car with our springs not only improves its sporty and comfortable driving feel but also highlights it visually.\u003c\/p\u003e \u003cp\u003eEnjoy a noticeably enhanced driving experience and improved handling thanks to reduced body roll during acceleration, minimized cornering lean, and decreased nosedive under braking.\u003c\/p\u003e \u003cp\u003eWhile the Eibach Pro-Kit makes your car sportier and more comfortable, safety and ride quality remain our top priorities. That’s why our suspension engineers and experts develop these springs to meet the highest safety standards. The Pro-Kit lowering springs are perfectly tuned to your stock dampers, ensuring compatibility with electronic damper adjustment systems.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Kit-Fahrwerksfedern-768x432.webp?v=1771917366\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-KIT-EN-2048x738_7a078f4b-27d8-42e4-8eb7-433dcf8cb608.webp?v=1771916922\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003eStock\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/stock-wheel-graphic-768x226.webp?v=1771917133\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eThe OEM’s design their suspension to appeal to the masses. They leave lots of room for improvements in handling, responsiveness and “get-rid-of-the-fender-gap” appearance that every enthusiast wants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003ePro-kit\u003c\/h1\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/prokit-wheel-graphic-768x226_07480690-5977-410d-b67f-ec4668b2b8a2.webp?v=1771917225\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will instantly notice the significant improvement in handling, braking and responsiveness. At the same time, PRO-KIT retains the same comfort level as stock.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,170\u003c\/li\u003e\u003cli\u003eAxle-Load Front: 1105 kg\u003c\/li\u003e\u003cli\u003eAxle-Load Rear: 1035 kg\u003c\/li\u003e\u003cli\u003eLowering Front Approx.: 30 mm\u003c\/li\u003e\u003cli\u003eLowering Rear Approx.: 20 mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624698048853,"sku":"E10-42-062-02-22","price":339.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_c34a99f0-1cf8-4b56-b17c-c91aecf97dfc.webp?v=1771907127"},{"product_id":"eibach-20mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-6-10-005","title":"Eibach 20mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-6-10-005)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 20mm\u003c\/li\u003e \u003cli\u003eSystem Type: 6\u003c\/li\u003e \u003cli\u003eNotes: S16,S33\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625898635605,"sku":"S90-6-10-005","price":133.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_bb609a59-5d05-4ee5-acb7-fac8782deb87.webp?v=1771924821"},{"product_id":"eibach-20mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-6-10-005-b","title":"Eibach 20mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-6-10-005-B)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 20mm\u003c\/li\u003e \u003cli\u003eSystem Type: 6\u003c\/li\u003e \u003cli\u003eNotes: S16,S33\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625898668373,"sku":"S90-6-10-005-B","price":133.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_53275863-9541-48b0-973b-4917db26595f.webp?v=1771924823"},{"product_id":"eibach-30mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-6-15-027","title":"Eibach 30mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-6-15-027)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 30mm\u003c\/li\u003e \u003cli\u003eSystem Type: 6\u003c\/li\u003e \u003cli\u003eNotes: S16,S33\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625898701141,"sku":"S90-6-15-027","price":137.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_40b3c980-bb79-492f-bcc9-a3acbe2c28db.webp?v=1771924825"},{"product_id":"eibach-30mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-6-15-027-b","title":"Eibach 30mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-6-15-027-B)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 30mm\u003c\/li\u003e \u003cli\u003eSystem Type: 6\u003c\/li\u003e \u003cli\u003eNotes: S16,S33\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625898766677,"sku":"S90-6-15-027-B","price":137.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_13190801-d6f4-466a-83ec-e9634e15e345.webp?v=1771924827"},{"product_id":"eibach-30mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-4-15-018","title":"Eibach 30mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-4-15-018)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 30mm\u003c\/li\u003e \u003cli\u003eSystem Type: 4\u003c\/li\u003e \u003cli\u003eNotes: S9\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625898832213,"sku":"S90-4-15-018","price":166.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_37999b5c-ae4a-4575-933f-9d152f689f8e.webp?v=1771924829"},{"product_id":"eibach-30mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-4-15-018-b","title":"Eibach 30mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-4-15-018-B)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 30mm\u003c\/li\u003e \u003cli\u003eSystem Type: 4\u003c\/li\u003e \u003cli\u003eNotes: S9\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625898864981,"sku":"S90-4-15-018-B","price":166.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_3ec611fd-8085-4926-a555-5f19dd6fe58d.webp?v=1771924831"},{"product_id":"eibach-40mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-6-20-028","title":"Eibach 40mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-6-20-028)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 40mm\u003c\/li\u003e \u003cli\u003eSystem Type: 6\u003c\/li\u003e \u003cli\u003eNotes: S16,S33\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625902076245,"sku":"S90-6-20-028","price":146.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_abafca22-5888-435a-8937-226e22fe745a.webp?v=1771924832"},{"product_id":"eibach-40mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-6-20-028-b","title":"Eibach 40mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-6-20-028-B)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 40mm\u003c\/li\u003e \u003cli\u003eSystem Type: 6\u003c\/li\u003e \u003cli\u003eNotes: S16,S33\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625902109013,"sku":"S90-6-20-028-B","price":146.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_02e2fcf0-66b1-496e-9f8a-5b10a6484643.webp?v=1771924834"},{"product_id":"eibach-40mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-4-20-024","title":"Eibach 40mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-4-20-024)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 40mm\u003c\/li\u003e \u003cli\u003eSystem Type: 4\u003c\/li\u003e \u003cli\u003eNotes: S9\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625902207317,"sku":"S90-4-20-024","price":164.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_38319d08-24ba-47ef-ac30-61e3c2e313a8.webp?v=1771924837"},{"product_id":"eibach-40mm-wheel-spacer-kit-for-hyundai-kona-0617-s90-4-20-024-b","title":"Eibach 40mm Wheel Spacer Kit for HYUNDAI KONA 06.17 - (S90-4-20-024-B)","description":"\u003cp\u003eCombine top performance with a more stable and wider track using our wheel spacers.\u003c\/p\u003e \u003cp\u003eAs the perfect complement to Eibach suspension springs, Pro-Spacer wheel spacers add a decisive sporty touch to your vehicle. In addition to enhancing aesthetics by fully filling out the wheel arches, they also improve vehicle handling and reduce body roll.\u003c\/p\u003e \u003cp\u003ePro-Spacer wheel spacers are available in sizes ranging from 5 to 30 mm, allowing you to position your wheels with precision. Whether with stock or aftermarket wheels, Pro-Spacer spacers deliver a noticeable difference that stands out.\u003c\/p\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Spacer-Uebersicht-gemischt_45ab367e-4f94-48e5-b49c-c09c1c05ac8c.webp?v=1771039164\"\u003e.\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Image_z93mlxz93mlxz93m.webp?v=1771040267\"\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eTotal Track widening: 40mm\u003c\/li\u003e \u003cli\u003eSystem Type: 4\u003c\/li\u003e \u003cli\u003eNotes: S9\u003c\/li\u003e \u003cli\u003eBolt Pattern\/No of holes: 114,3\/5\u003c\/li\u003e \u003cli\u003eCentre Bore: 67\u003c\/li\u003e \u003cli\u003eThread of Bolt: M12x1,5\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52625902240085,"sku":"S90-4-20-024-B","price":164.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_cb1e3579-9a93-4684-8ddc-2f3b84ff7b85.webp?v=1771924838"},{"product_id":"front-splitter-hyundai-kona-n-line-mk2-hy-ko-2-nline-fd1g","title":"Maxton Front Splitter Hyundai Kona N-Line Mk2","description":"\u003cp\u003e\u003cstrong\u003eFront Splitter Hyundai Kona N-Line Mk2\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003eFITS:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eHyundai Kona N-Line Mk2 (2022-)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cb\u003eCOMPLETE SET CONTAINS:\u003c\/b\u003e\u003c\/u\u003e\u003cbr\u003e-\u0026gt; Front Splitter\u003cbr\u003e-\u0026gt; Fitting Kit\u003cbr\u003e-\u0026gt; Fitting Manual\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOLOUR:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; Gloss Black\u003c\/p\u003e \u003cp\u003eFitting manual: \u003cstrong\u003eFRONT SPLITTER INSTALLATION MANUAL\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; Designed using 3D scanning technology to ensure a picture-perfect fit.\u003cbr\u003e-\u0026gt; Provides a unique OEM+ finish.\u003cbr\u003e-\u0026gt; Lightweight and offers some flexibility.\u003cbr\u003e-\u0026gt; Front Splitters help produce a larger surface area for downforce, improving vehicle stability. \u003cbr\u003e-\u0026gt; This product is made from ABS plastic. The same material is used widely in the automotive industry.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMORE INFORMATION:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; No additional work is required to finish the product.\u003cbr\u003e-\u0026gt; The product will arrive with a protective film. \u003cbr\u003e-\u0026gt; Removal of the protective film will void any returns, only remove once you are certain the product will fit.\u003cbr\u003e-\u0026gt; We cannot be held responsible for the incorrect installation or use of this product.\u003cbr\u003e-\u0026gt; Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment. \u003cbr\u003e-\u0026gt; We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.\u003cbr\u003e-\u0026gt; This product has been TUV MATERIALGUTACHTEN certified.\u003cbr\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":54438253560149,"sku":"HY-KO-2-NLINE-FD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/20240319192505_65f9e6917cfbb.webp?v=1787214949"},{"product_id":"side-skirts-diffusers-hyundai-kona-n-line-mk2-hy-ko-2-nline-sd1g","title":"Maxton Side Skirts Diffusers Hyundai Kona N-line Mk2","description":"\u003cp\u003e\u003cstrong\u003eSide Skirts Diffusers Hyundai Kona N-line Mk2\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003eFITS:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eHyundai Kona N-Line Mk2 (2022-)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cb\u003eCOMPLETE SET CONTAINS:\u003c\/b\u003e\u003c\/u\u003e\u003cbr\u003e-\u0026gt; Side Skirts Diffusers (Left + Right)\u003cbr\u003e-\u0026gt; Fitting Kit\u003cbr\u003e-\u0026gt; Fitting Manual\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOLOUR:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; Gloss Black\u003c\/p\u003e \u003cp\u003eFitting manual: \u003cstrong\u003eSIDE SKIRT DIFFUSERS INSTALLATION MANUAL\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; Designed using 3D scanning technology to ensure a picture-perfect fit.\u003cbr\u003e-\u0026gt; Provides a unique OEM+ finish.\u003cbr\u003e-\u0026gt; Lightweight and offers some flexibility.\u003cbr\u003e-\u0026gt; This product is made from ABS plastic. The same material is used widely in the automotive industry.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMORE INFORMATION:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; No additional work is required to finish the product.\u003cbr\u003e-\u0026gt; The product will arrive with a protective film. \u003cbr\u003e-\u0026gt; Removal of the protective film will void any returns, only remove once you are certain the product will fit.\u003cbr\u003e-\u0026gt; We cannot be held responsible for the incorrect installation or use of this product.\u003cbr\u003e-\u0026gt; Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment. \u003cbr\u003e-\u0026gt; We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.\u003cbr\u003e-\u0026gt; This product has been TUV MATERIALGUTACHTEN certified.\u003cbr\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":54438253592917,"sku":"HY-KO-2-NLINE-SD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/20240319192709_65f9e70dc101e.webp?v=1787214949"},{"product_id":"spoiler-cap-hyundai-kona-n-line-mk2-hy-ko-2-nline-cap1g","title":"Maxton Spoiler CAP Hyundai Kona N-Line Mk2","description":"\u003cp\u003e\u003cstrong\u003eSpoiler CAP Hyundai Kona N-Line Mk2\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003eFITS:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eHyundai Kona N-Line Mk2 (2022-)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cb\u003eCOMPLETE SET CONTAINS:\u003c\/b\u003e\u003c\/u\u003e\u003cbr\u003e-\u0026gt; Spoiler Extension + 3M Tape\u003cbr\u003e-\u0026gt; Degreasing Cloth\u003cbr\u003e-\u0026gt; Fitting Manual\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOLOUR:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; Gloss Black\u003c\/p\u003e \u003cp\u003eFitting manuals: \u003cstrong\u003eSPOILER EXTENSION INSTALLATION MANUAL\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; Designed using 3D scanning technology to ensure a picture-perfect fit.\u003cbr\u003e-\u0026gt; Provides a unique OEM+ finish.\u003cbr\u003e-\u0026gt; Lightweight and offers some flexibility.\u003cbr\u003e-\u0026gt; This product is made from ABS plastic. The same material is used widely in the automotive industry.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMORE INFORMATION:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; No additional work is required to finish the product.\u003cbr\u003e-\u0026gt; The product will arrive with a protective film. \u003cbr\u003e-\u0026gt; Removal of the protective film will void any returns, only remove once you are certain the product will fit.\u003cbr\u003e-\u0026gt; We cannot be held responsible for the incorrect installation or use of this product.\u003cbr\u003e-\u0026gt; Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment. \u003cbr\u003e-\u0026gt; We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.\u003cbr\u003e-\u0026gt; This product has been TUV MATERIALGUTACHTEN certified.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":54438253625685,"sku":"HY-KO-2-NLINE-CAP1G","price":129.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/20240319192845_65f9e76d51e1f.webp?v=1787214948"},{"product_id":"central-rear-splitter-vertical-bars-hyundai-kona-n-line-mk2-hy-ko-2-nline-rsd1g-rd1g","title":"Maxton Central Rear Splitter (Vertical Bars) Hyundai Kona N-Line Mk2","description":"\u003cp\u003e\u003cstrong\u003eCentral Rear Splitter (Vertical Bars) Hyundai Kona N-Line Mk2\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003eFITS:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eHyundai Kona N-Line Mk2 (2022-)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cb\u003eCOMPLETE SET CONTAINS:\u003c\/b\u003e\u003c\/u\u003e\u003cbr\u003e-\u0026gt; Rear Diffuser\u003cbr\u003e-\u0026gt; Fitting manual\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOLOUR:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; Gloss Black\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003ca\u003eFitting manual: \u003c\/a\u003e\u003cstrong\u003eREAR CENTER SPLITTERS INSTALLATION MANUAL\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; Designed using 3D scanning technology to ensure a picture-perfect fit.\u003cbr\u003e-\u0026gt; Provides a unique OEM+ finish.\u003cbr\u003e-\u0026gt; Lightweight and offers some flexibility.\u003cbr\u003e-\u0026gt; This product is made from ABS plastic. The same material is used widely in the automotive industry.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMORE INFORMATION:\u003c\/strong\u003e\u003cbr\u003e-\u0026gt; No additional work is required to finish the product.\u003cbr\u003e-\u0026gt; The product will arrive with a protective film. \u003cbr\u003e-\u0026gt; Removal of the protective film will void any returns, only remove once you are certain the product will fit.\u003cbr\u003e-\u0026gt; We cannot be held responsible for the incorrect installation or use of this product.\u003cbr\u003e-\u0026gt; Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment. \u003cbr\u003e-\u0026gt; We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.\u003cbr\u003e-\u0026gt; This product has been TUV MATERIALGUTACHTEN certified.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":54438257033557,"sku":"HY-KO-2-NLINE-RSD1G+RD1G","price":219.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/20240319193038_65f9e7def2987.webp?v=1787214949"},{"product_id":"oil-cap-for-hyundai-and-kia","title":"Oil Cap for Hyundai and Kia","description":"\u003cp\u003eFMCAP9 is Forge Motorsport's machined billet oil cap which replaces the OE plastic item found in many Hyundai\/Kia vehicles. Like all of our caps and covers, FMCAP9 has been crafted from solid billet 6061 aerospace grade aluminium, and then machined to the specifications created from Forges in house CAD team. Every single machined product is made at our Gloucestershire HQ by engineers with over 30 years of experience.\u003c\/p\u003e\r\n\r\n\u003cp\u003eInstalling FMCAP9 will ensure that you will never again experience a oil breach from the original oil cap due to low tolerance design.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo customise the look we have designed our caps to be constructed from two pieces. This allows for different colour options to be chosen for each part of the oil cap to create a bespoke product which will enhance any engine bay. The finishes available are mirror polished finish or gloss anodised in either black or red. Whichever combination you choose the finished item you will receive will be exquisite.\u003c\/p\u003e\r\n\r\n\u003cp\u003eLike all Forge Motorsport products FMCAP9 is covered with our unmatched lifetime warranty.*\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePlease take care to read the fitting \u003c\/strong\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/?download_id=507\" target=\"_blank\"\u003e\u003cstrong\u003einstructions\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e fully before pushing the insert into the body of the cap.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eCompatible Vehicles for fitment of this oil cap include: \u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eHyundai I20N\u003c\/li\u003e\r\n\t\u003cli\u003eHyundai I30N\u003c\/li\u003e\r\n\t\u003cli\u003eHyundai I30 1.4 GDI\u003c\/li\u003e\r\n\t\u003cli\u003eHyundai Veloster N\u003c\/li\u003e\r\n\t\u003cli\u003eHyundai Kona N\u003c\/li\u003e\r\n\t\u003cli\u003eHyundai Kona1.6 N-line\u003c\/li\u003e\r\n\t\u003cli\u003eHyundai Elantra N\u003c\/li\u003e\r\n\t\u003cli\u003eKia Cee’d GT 2018-\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/1.jpg\"\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":54765228065109,"sku":"FMCAP9","price":39.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/6dcbaefe2762.webp?v=1787834979"},{"product_id":"hyundai-i30n-veloster-n-elantra-n-kona-n-performance-ignition-coil-pack","title":"Hyundai i30N, Veloster N, Elantra N \u0026 Kona N Performance Ignition Coil Pack.","description":"\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\r\nGive your Hyundai N engine the upgrade it deserves with enhanced spark performance. \u003cbr\u003e\r\nThe Forge Motorsport upgraded ignition coils deliver a stronger, more consistent spark than standard coils, helping your engine burn fuel more efficiently. \u003cbr\u003e\r\n\u003cstrong\u003eThe result is noticeable gains in power, faster acceleration, smoother idling, and significantly reduced misfires. \u003c\/strong\u003e\u003cbr\u003e\r\nEvery drive will feel more responsive and reliable.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThese replace the OEM part numbers: 27300-2GGA0\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color:#FF0000;\"\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cstrong\u003eOur performance ignition coil pack is priced individually.The price shown above is for one coil pack.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e• 12% Increased Ignition Output\u003c\/strong\u003e\u003cbr\u003e\r\nDelivers a noticeable boost in spark energy over standard coils, supporting improved engine performance and responsiveness.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e• Optimised Combustion Efficiency\u003c\/strong\u003e\u003cbr\u003e\r\nA stronger spark promotes a more complete fuel burn, contributing to better power delivery and improved efficiency.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e• Sharper Throttle Response\u003c\/strong\u003e\u003cbr\u003e\r\nProvides a more immediate and precise connection between accelerator input and engine reaction for quicker acceleration.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e• Improved Fuel Economy\u003c\/strong\u003e\u003cbr\u003e\r\nMore efficient combustion helps minimise fuel waste, allowing for greater distance per tank.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e• Smoother Idle Performance\u003c\/strong\u003e\u003cbr\u003e\r\nConsistent spark delivery helps maintain a stable and refined idle across varying driving conditions.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e• Balanced Performance \u0026amp; Longevity\u003c\/strong\u003e\u003cbr\u003e\r\nDesigned to increase spark output while managing heat effectively for sustained, reliable operation.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e• Dependable Under Load\u003c\/strong\u003e\u003cbr\u003e\r\nMaintains stable voltage from idle to high RPM, ensuring consistent ignition performance even under demanding conditions.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e• Easy Plug-and-Play Fitment\u003c\/strong\u003e\u003cbr\u003e\r\nDirect replacement for OE components with no modifications required.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e• Proactive Replacement Solution\u003c\/strong\u003e\u003cbr\u003e\r\nIdeal for replacing worn factory coils to help avoid misfires and maintain smooth, consistent engine operation.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eForge Motorsport ignition coil packs are not covered under the Forge Motorsport (Limited) Lifetime Warranty. These items instead carry a 12 month warranty against manufacturing defects, running from the original date of purchase. For full warranty information please visit our \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Terms_and_Conditions_UK.html\"\u003eTerms and Conditions.\u003c\/a\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":54765228163413,"sku":"FMCP04","price":33.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/69d48d1ddf67.webp?v=1787834984"},{"product_id":"hyundai-i30-n-2-0-t-gdi-large-bore-downpipe-and-hi-flow-sports-cat","title":"Hyundai i30 N 2.0 T-GDi - Large Bore Downpipe and Hi-Flow Sports Cat","description":"\u003cp\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency. Used with our Catalyst Bypass Pipe, you can expect significant power-gain without any restriction on gas-flow made by a catalyst.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eWhat this downpipe does:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eThe downpipe is the first section of the exhaust system after the turbocharger. The factory downpipe can be restrictive, limiting power when under boost or when other performance upgrades are added. The Milltek downpipe features:\u003c\/li\u003e\r\n\t\u003cli\u003eSmoother bends and a larger internal diameter\u003c\/li\u003e\r\n\t\u003cli\u003eA high-flow sports catalyst for improved exhaust flow\u003c\/li\u003e\r\n\t\u003cli\u003eEnhanced throttle response and a more dynamic driving feel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eKey features and benefits:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eImproved exhaust flow: The cast high-flow design allows for effective exhaust gas expulsion, reducing backpressure and increasing power.\u003c\/li\u003e\r\n\t\u003cli\u003eDurable construction: Made from T304 stainless steel, this downpipe is built to resist corrosion and withstand high temperatures, making it suitable for both daily driving and performance applications.\u003c\/li\u003e\r\n\t\u003cli\u003eTuning ready: This downpipe is optimal when paired with a Stage 2 setup, which includes performance engine software (ECU remap), upgraded intake, and cat-back exhaust systems.\u003c\/li\u003e\r\n\t\u003cli\u003eCompatible with the OE OPF back exhaust or better still when combined with Milltek OPF back system.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\r\n- Increased Diameter Stainless Steel Pipework \u003cbr\u003e\r\n- Stage 2 Remap Required\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSystem comprises of: \u003c\/strong\u003e\u003cbr\u003e\r\n- Downpipe with 200 Cell Sports Cat or De-Cat\u003cbr\u003e\r\n- Fitting Kit \u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003e\r\n\t\u003cp\u003eHyundai i30N 2.0 T-GDi (250PS - Non-OPF models only) \u0026gt; 2017 to 2018\u003c\/p\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\u003cp\u003eHyundai  i30N 2.0 T-GDi (250PS - OPF\/GPF models only) \u0026gt; 2019 to 2021\u003c\/p\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\u003cp\u003eHyundai i30N Performance 2.0 T-GDi (275PS - Non-OPF models only) \u0026gt; 2017 to 2018\u003c\/p\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\u003cp\u003eHyundai i30N Performance 2.0 T-GDi (280PS - Facelift OPF\/GPF Models Only)\u003c\/p\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\u003cp\u003eHyundai Kona N 2.0L Turbo 280ps (OPF\/GPF Models) \u0026gt; 2022 and Later\u003c\/p\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\u003cp\u003eHyundai Veloster N 2.0L Turbo 275ps \u003c\/p\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003e\r\n\t\u003cp\u003eHyundai Veloster N 2.0L Turbo 280ps\u003c\/p\u003e\r\n\t\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eWarrenty:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e2 years 80,000 miles which ever comes first\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eImportant usage information:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eFor the best results, Stage 2 ECU software is highly recommended, as the stock mapping is not designed for the increased flow and may cause performance issues. Additionally:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eLegal Note: A sport-cat downpipe may not be legal for road use in all regions. Check local emissions regulations before installation.\u003c\/li\u003e\r\n\t\u003cli\u003eInstallation: Professional installation is recommended to ensure correct fitting and reliable performance.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":54765229113685,"sku":"FMSSXHY196","price":729.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/a5f78c9979e4.webp?v=1787835014"},{"product_id":"tcu-gearbox-performance-software-for-hyundai-dct","title":"TCU Gearbox Performance Software For Hyundai DCT","description":"\u003cp\u003eHere at Forge Motorsport we have spent years developing and working with the Hyundai N platforms and we produce a vast array of performance hardware to improve efficiency and performance alike. However to extract the full potential of these products it is essential to combine performance enhancing products customised performance software!\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eAnd with the introduction of the second generation Hyundai I30N we save the addition of there DCT gearbox, a gearbox which works very well indeed! However since we have pushed the envelope with ECU tuning to extract huge gains in power and more importantly torque, we soon found the Hyundai’s DCT limitations. Clutch slip is apparent when achieving over 500Nm  of torque, so the Forge development team have worked with industry leading software engineers to develop new TCU software for the Hyundai.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eWHAT IS A TCU?\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eVehicles equipped with automatic transmissions are normally fitted with a TCU (Transmission Control Unit. This control unit manages all aspects of the transmission functionality i.e. gear shift and torque limitations. The TCU works together with the engines ECU by sending and receiving real time data across the vehicles network system, so when tuning the engines ECU for more performance it is recommended to have the TCU parameters changed at the same time. This will then ensure both control units continue to work in harmony and fully optimize the performance and drivability of the vehicle.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/i30n%20DTC%20scamatic.jpg\" style=\"width: 980px; height: 525px;\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eThe number of the parameters that can be changed is dependent on the application, however here are some of the key benefits you will gain with this TCU upgrade:\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eShift Speed\u003c\/strong\u003e – Increasing the speed in which the gearbox changes gear.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eTorque Limiters\u003c\/strong\u003e – Increasing the torque limiters ensures the transmission cannot limit the performance of the engine, we have now increased this in all gears.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eHydraulic Pressure\u003c\/strong\u003e – Increasing the hydraulic pressure can increase clutch clamping pressure to prevent clutch slip on highly tuned vehicle.  Clamping pressure increased (25 bar) (Stock = 23 bar)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eShift points\u003c\/strong\u003e – Changing the RPM limiter of the engine is often not possible without modifying the TCU software, the shift RPM has now been raised in 2nd, 3rd, and 4th gears\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003e\n\u003cstrong\u003eFull manual mode\u003c\/strong\u003e - activation via paddles switched on\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/i30n-fast-shift.jpg\" style=\"width: 800px; height: 429px;\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eThis software is essential for stage 2 tuned vehicles, especially with our High Torque Stage 2 software which was developed together with our TCU software. The ability to push the boundaries of the 2.0 T-GDI engine with this TCU software are vast and this really does make for a complete impressive package.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eThe other key feature of this software is the ‘’no compromise in drivability’’, it really does drive like a stock vehicle. There is no jerkiness from hard shifts, no harshness at all, which is one of the key benefits.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eThis software takes 2 hours to install onto your vehicle, and we need the vehicle at Forge Motorsports Gloucester HQ.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":54765229211989,"sku":"FMREMAP-TCU-HYUNDAI","price":316.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/5470f3446c69.webp?v=1787835018"}],"url":"https:\/\/shop.regalautosport.com\/collections\/hyundai-sx2-kona.oembed","provider":"Regal Autosport","version":"1.0","type":"link"}