{"title":"Hyundai Veloster","description":null,"products":[{"product_id":"csf-intercooler-for-hyundai-i30n-black-html","title":"Hyundai Veloster N \/ i30 N Stepped-Core Intercooler - Black (Discontinued)","description":"\u003cp\u003eBisimoto is no stranger to Hyundai tuning - back in 2019, Bisi approached CSF back in need of an upgraded intercooler for his factory-backed Veloster N SEMA project. Pushing the limits of the N platform, Bisi's car featured upgraded turbos and high-performance tuning, resulting in the OEM intercooler showing its weaknesses and inability to shed heat from the turbo system. With technology taken from CSF's #1 selling BMW N54\/N55 intercooler, the front face of the intercooler features CSF's exclusive rounded bar\/plate design, which aids the air entering the intercooler core by curving around the front bars rather than hitting and scattering on the surface of a traditional flat-bar faced intercooler. CSF's stepped-core design maximizes all of the available frontal area behind the front bumper and underneath the crash bar. The stepped-core protrudes upwards in front of the A.C. Condenser and sits just shy of the crash bar, for both the Veloster N and i30 N. Through prototype testing and data acquisition with Bisimoto, the decision was made to keep the OEM-sized inlet and outlet connections. This resulted in low pressure drop, even considering how much larger the CSF intercooler is - in addition, this feature removes the need to include costly and unnecessary silicone hoses, allowing CSF to offer the N community the best value, entering the market at the most aggressive price point.\u003c\/p\u003e\u003cp\u003eThe CSF #8192B comes in a black finish. It is also available in silver (CSF #8192). The CSF #8192\/8192B are for Manual Transmission only. The CSF #8238\/8238B are available for the DCT equipped Veloster N\/i30 N.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStepped Core Design for Maximum Surface Area Contact and Internal Intake Air-Flow Volume\u003c\/li\u003e\n\u003cli\u003eLargest \"Drop-in Fit\" Intercooler Available in the Industry\u003c\/li\u003e\n\u003cli\u003eDesigned with 3D Scanning\/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization\u003c\/li\u003e\n\u003cli\u003eLab Tested in CSF's In-House Wind Tunnel\u003c\/li\u003e\n\u003cli\u003eRounded Front Face Bar\/Plate Design for Optimized Airflow Through the Core\u003c\/li\u003e\n\u003cli\u003eIntegrated Air Temperature Sensor Bracket\u003c\/li\u003e\n\u003cli\u003e\"Drop-in Fit\" Design for an Easy \u0026amp; Quick Plug-and-Play Installation\u003c\/li\u003e\n\u003cli\u003eFully Reversible Back to OEM Spec with No Modifications Needed\u003c\/li\u003e\n\u003cli\u003eBlack Finish (Also available in Silver - CSF #8192)\u003c\/li\u003e\n\u003cli\u003eIncludes Both Bisimoto and CSF Stencils for Front Core Face Customization\u003c\/li\u003e\n\u003cli\u003eManual Transmission Only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eChassis Code\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003cth\u003eEngine \/ Trans \/ Etc\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2019-2022\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eVeloster N\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eTurbocharged 2.0L L4\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eOEM Part Numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHyundai: 28270 2GTB1\u003c\/li\u003e\n\u003cli\u003eHyundai: 28270-2GTB1\u003c\/li\u003e\n\u003cli\u003eHyundai: 282702GTB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CSF Radiators","offers":[{"title":"Default Title","offer_id":47390446190933,"sku":"CSF-8192B","price":336.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/8192B_1.webp?v=1787167595"},{"product_id":"csf-intercooler-for-hyundai-i30n-silver-html","title":"Hyundai Veloster N \/ i30 N Stepped-Core Intercooler - Silver (Discontinued)","description":"\u003cp\u003eBisimoto is no stranger to Hyundai tuning - back in 2019, Bisi approached CSF back in need of an upgraded intercooler for his factory-backed Veloster N SEMA project. Pushing the limits of the N platform, Bisi's car featured upgraded turbos and high-performance tuning, resulting in the OEM intercooler showing its weaknesses and inability to shed heat from the turbo system. With technology taken from CSF's #1 selling BMW N54\/N55 intercooler, the front face of the intercooler features CSF's exclusive rounded bar\/plate design, which aids the air entering the intercooler core by curving around the front bars rather than hitting and scattering on the surface of a traditional flat-bar faced intercooler. CSF's stepped-core design maximizes all of the available frontal area behind the front bumper and underneath the crash bar. The stepped-core protrudes upwards in front of the A.C. Condenser and sits just shy of the crash bar, for both the Veloster N and i30 N. Through prototype testing and data acquisition with Bisimoto, the decision was made to keep the OEM-sized inlet and outlet connections. This resulted in low pressure drop, even considering how much larger the CSF intercooler is - in addition, this feature removes the need to include costly and unnecessary silicone hoses, allowing CSF to offer the N community the best value, entering the market at the most aggressive price point.\u003c\/p\u003e\u003cp\u003eThe CSF #8192 comes in a silver finish. It is also available in black (CSF #8192B). The CSF #8192\/8192B are for Manual Transmission only. The CSF #8238\/8238B are available for the DCT equipped Veloster N\/i30 N.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStepped Core Design for Maximum Surface Area Contact and Internal Intake Air-Flow Volume\u003c\/li\u003e\n\u003cli\u003eLargest \"Drop-in Fit\" Intercooler Available in the Industry\u003c\/li\u003e\n\u003cli\u003eDesigned with 3D Scanning\/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization\u003c\/li\u003e\n\u003cli\u003eLab Tested in CSF's In-House Wind Tunnel\u003c\/li\u003e\n\u003cli\u003eRounded Front Face Bar\/Plate Design for Optimized Airflow Through the Core\u003c\/li\u003e\n\u003cli\u003eIntegrated Air Temperature Sensor Bracket\u003c\/li\u003e\n\u003cli\u003e\"Drop-in Fit\" Design for an Easy \u0026amp; Quick Plug-and-Play Installation\u003c\/li\u003e\n\u003cli\u003eFully Reversible Back to OEM Spec with No Modifications Needed\u003c\/li\u003e\n\u003cli\u003eSilver Finish (Also available in Black - CSF #8192B)\u003c\/li\u003e\n\u003cli\u003eIncludes Both Bisimoto and CSF Stencils for Front Core Face Customization\u003c\/li\u003e\n\u003cli\u003eManual Transmission Only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eChassis Code\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003cth\u003eEngine \/ Trans \/ Etc\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2019-2022\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eVeloster N\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003eTurbocharged 2.0L L4 (Manual)\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eOEM Part Numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHyundai: 28270 2GTB1\u003c\/li\u003e\n\u003cli\u003eHyundai: 28270-2GTB1\u003c\/li\u003e\n\u003cli\u003eHyundai: 282702GTB1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CSF Radiators","offers":[{"title":"Default Title","offer_id":47390446322005,"sku":"CSF-8192","price":336.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/8192_1.webp?v=1787167595"},{"product_id":"atmospheric-and-recirculating-valve-for-hyundai-i30n-kona-n-and-veloster-n-fmdv20","title":"Atmospheric and Recirculating Valve for Hyundai i30N, Kona N, and Veloster N","description":"\u003cp align=\"center\"\u003e\u003cb\u003eThis part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eOur uprated valve for the Hyundai i30N, Kona N, and Veloster N has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, this valve can be used either as a \u003ca href=\"https:\/\/www.youtube.com\/watch?v=XmMZVDXS-Z0\u0026amp;t=1s\" target=\"_blank\"\u003efully atmospheric (blow off) valve\u003c\/a\u003e, or a recirculating valve - you choose!\u003c\/p\u003e\r\n\r\n\u003cp\u003eOur unrivalled design uses a boost to side entry on the valve meaning unlike our competitors the valve cannot lift under high or low boost applications. The advantage of this eliminates the need to change the valves internal spring rate to a higher tension when tuning the vehicle.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis part replaces OEM Part No. 282342-CTA4\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eUtilising world leading springs for more precise operation and consistency\u003c\/li\u003e\r\n\t\u003cli\u003eAll internal and external components have been made in the UK, ensuring top quality, and offering a valve with faster response times and longer service intervals\u003c\/li\u003e\r\n\t\u003cli\u003eThe piston uses heat stabilised Viton O-rings\u003c\/li\u003e\r\n\t\u003cli\u003eLubricated with high temperature \u003ca href=\"https:\/\/www.mobil1.co.uk\/\" target=\"_blank\"\u003eMobil1\u003c\/a\u003e grease to ensure a long life with minimal wear and very long service intervals\u003c\/li\u003e\r\n\t\u003cli\u003eA super durable and responsive aluminium piston\u003c\/li\u003e\r\n\t\u003cli\u003eFully \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Forge_Motorsport_Valve_Service_Kit--product--792.html\" target=\"_blank\"\u003eserviceable\u003c\/a\u003e and rebuildable in minutes\u003c\/li\u003e\r\n\t\u003cli\u003eAvailable in anodised black\u003c\/li\u003e\r\n\t\u003cli\u003eUnlike other valves on the market, ours produces no check engine lights (EML)\u003c\/li\u003e\r\n\t\u003cli\u003eCovered by the unique Forge Lifetime Warranty*\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_91647jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_89927jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis kit will include all the parts required for atmospheric or recirculating set up. \u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/4.jpg\"\u003e\u003c\/strong\u003e\u003cbr\u003e\r\n\u003cscript async charset=\"utf-8\" src=\"\/\/cdn.thinglink.me\/jse\/embed.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":47717599904085,"sku":"FMDV20-BLA","price":194.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_89927jpeg.webp?v=1787168722"},{"product_id":"induction-kit-for-hyundai-i30n-kona-n-and-veloster-n-fmindk28","title":"Induction Kit for Hyundai i30N, Kona N, and Veloster N","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eForge Motorsport are excited to present our industry leading intake for the Hyundai i30N, Kona N, and Veloster N. This aftermarket cold air intake system \u003cstrong\u003eimproves your Hyundai's airflow\u003c\/strong\u003e in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range \u003cstrong\u003ewithout any loss of low-end torque\u003c\/strong\u003e. The pipework is specifically designed to feed the turbo without interruption. The result of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the Hyundai’s 2.0 four pot engine.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_85627jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_85627jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_24085jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_24085jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_27640jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_27640jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_53784jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_53784jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eAs always filtration is important when developing an intake, so we once again turned to the industry leaders and Forge long term filtration partners \u003ca href=\"http:\/\/www.pipercross.net\/\" target=\"_blank\"\u003ePipercross\u003c\/a\u003e. With over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in our ‘Hi-Flow’ range. The large filter provided \u003cstrong\u003eflows 60% more air than the stock filter.\u003c\/strong\u003e (Replacement filters can be found \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/search?q=fmindk28\" target=\"_blank\"\u003ehere\u003c\/a\u003e). The intake is finished off with our unique black thermal powder coating. This kit comes with Forge’s usual detailed \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/?download_id=541\" target=\"_blank\"\u003efitting guide\u003c\/a\u003e to help make installation as easy as possible.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_63785jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_63785jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_72700jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_72700jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_95794jpeg.jpg\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30n_95794jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eHyundai boast figures of 275bhp and 278lb.ft on their standard vehicle. When we ran our CAT backed performance exhaust development vehicle on the dyno with this intake it reached figures of \u003cstrong\u003e296bhp and 310lb.ft!\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca class=\"modal-image-popup\" href=\"\/userfiles\/images\/website_imgs\/FMINDK28\/FMINDK28-INTAKE-DYNOGRAPH.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"\" class=\"center-block\" download=\"\" src=\"\/userfiles\/images\/website_imgs\/FMINDK28\/FMINDK28-INTAKE-DYNOGRAPH.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eInterestingly there has been lots of divided opinions about our intake requiring a heat shield. Testing took place with the bonnet shut and replicated wind speeds of around 70MPH. Intake temperatures were logged and monitored along with thermal images taken,. \u003cstrong\u003eDuring this testing, we did not see the inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e⭐ Once again, Forge Motorsport knock it out of the park with superb quality and super fast delivery. Highly Recommended ⭐\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eIn the Box:\u003cbr\u003e\r\n1 x Black Alloy Hard Pipe\u003cbr\u003e\r\n1 x Pipercross Filter\u003cbr\u003e\r\n1 x Valve Silicon Joiner\u003cbr\u003e\r\n2 x Hose clamps\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\" style=\"width: 600px; height: 39px;\"\u003e\u003c\/p\u003e\r\n\r\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h2\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Uprated_Intercooler_for_Hyundai_i30N--product--1713.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Uprated_Intercooler_for_Hyundai_i30N_92390jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Uprated_Intercooler_for_Hyundai_i30N--product--1713.html\" target=\"_blank\"\u003eIntercooler\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit--product--1832.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit_59933jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit--product--1832.html\" target=\"_blank\"\u003eCoolant Hoses\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_Mk3_PFLVeloster_N_Turbo_Inlet_Adaptor--product--1790.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_58589jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_Mk3_PFLVeloster_N_Turbo_Inlet_Adaptor--product--1790.html\" target=\"_blank\"\u003eTurbo Inlet Adaptor\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Blue Hoses \/ With Gold Tape \/ Foam","offer_id":47717602099541,"sku":"FMINDK28-BLU-GW-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Blue Hoses \/ Without Gold Tape \/ Foam","offer_id":47717602132309,"sku":"FMINDK28-BLU-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Black Hoses \/ With Gold Tape \/ Foam","offer_id":47717602165077,"sku":"FMINDK28-BLA-GW-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Black Hoses \/ Without Gold Tape \/ Foam","offer_id":47717602197845,"sku":"FMINDK28-BLA-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hoses \/ With Gold Tape \/ Foam","offer_id":47717602230613,"sku":"FMINDK28-PER-GW-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hoses \/ Without Gold Tape \/ Foam","offer_id":47717602263381,"sku":"FMINDK28-PER-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Red Hoses \/ With Gold Tape \/ Foam","offer_id":47717602296149,"sku":"FMINDK28-RED-GW-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Red Hoses \/ Without Gold Tape \/ Foam","offer_id":47717602328917,"sku":"FMINDK28-RED-FOA","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Blue Hoses \/ Without Gold Tape \/ Pleated","offer_id":47717602361685,"sku":"FMINDK28-BLU-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Black Hoses \/ Without Gold Tape \/ Pleated","offer_id":47717602394453,"sku":"FMINDK28-BLA-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Black Hoses \/ With Gold Tape \/ Pleated","offer_id":47717602427221,"sku":"FMINDK28-BLA-GW-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Red Hoses \/ Without Gold Tape \/ Pleated","offer_id":47717602459989,"sku":"FMINDK28-RED-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Red Hoses \/ With Gold Tape \/ Pleated","offer_id":47717602492757,"sku":"FMINDK28-RED-GW-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hoses \/ Without Gold Tape \/ Pleated","offer_id":47717602525525,"sku":"FMINDK28-PER-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hoses \/ With Gold Tape \/ Pleated","offer_id":47717602558293,"sku":"FMINDK28-PER-GW-PLE","price":336.63,"currency_code":"GBP","in_stock":true},{"title":"Blue Hoses \/ With Gold Tape \/ Pleated","offer_id":47717602591061,"sku":"FMINDK28-BLU-GW-PLE","price":336.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N_85627jpeg.webp?v=1787168722"},{"product_id":"short-and-side-shifter-for-hyundai-i30n-and-veloster-n-fmss3","title":"Short and Side Shifter for Hyundai i30N and Veloster N","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eHyundai i30N and Veloster N short shifter and side shifter set. This part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe i30N and Veloster N are both a very sporty hot hatch but the sporty feel can be let down by the amount of travel in the gear stick. This short\/quick shifter set has been developed by Forge to offer a short, crisp, and precise gear changing experience.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Short_and_Side_Shifter_for_Hyundai_i30N_and_Veloster_N__63960jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Short_and_Side_Shifter_for_Hyundai_i30N_and_Veloster_N__75652jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Short_and_Side_Shifter_for_Hyundai_i30N_and_Veloster_N__61814jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eDesigned with black stealth OEM styling and simple adjustability to suit the individual’s driving needs.\u003cstrong\u003eThe horizontal and vertical travel between gears can be set to standard or reduced by any amount up to approximately 50%.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eView our video instructions here:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/etrJbMyjiFc\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eView our unboxing video here:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003ciframe allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/xV1bDSKPTCk\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eIn The Box:\u003cbr\u003e\r\n1 x Short Shifter Lever\u003cbr\u003e\r\n1 x Side Shifter Lever\u003cbr\u003e\r\n1 x Long Pin\u003cbr\u003e\r\n1 x Short Pin\u003cbr\u003e\r\n2 x M8 Nyloc Nuts\u003cbr\u003e\r\n1 x Instructions\u003cbr\u003e\r\n1 x Forge Sticker\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/5.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":47717644665173,"sku":"FMSS3","price":104.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Short_and_Side_Shifter_for_Hyundai_i30N_and_Veloster_N__63960jpeg.webp?v=1787168759"},{"product_id":"hyundai-i30n-mk3-pflveloster-n-turbo-inlet-adaptor-fmtia2","title":"Hyundai i30N Mk3 PFL\/Veloster N Turbo Inlet Adaptor","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color:#FF0000;\"\u003e\u003cstrong\u003eTHIS WILL ONLY FIT 4\" INTAKES - THIS WILL \u003cu\u003eNOT\u003c\/u\u003e FIT THE STOCK AIRBOX. THIS WILL ONLY FIT THE MK3 I30N\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the i30N and Veloster N. \u003c\/p\u003e\r\n\r\n\u003cp\u003eDesigned and developed by our highly skilled team on the Solidworks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance. With one of the weak links on the i30N and Veloster's intake system being the restrictive aluminium inlet pipe, we found something more was needed on stage 1 and 2 tuned vehicles. You can not go wrong with Forge hardware on your tuned Hyundai - the results speak for themselves!\u003c\/p\u003e\r\n\r\n\u003cp\u003eMated to our 4” intake and high performance filter (\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003eFMINDK28\u003c\/a\u003e) the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/imgonline-com-ua-twotoone-0qyIxfq1D8a1.jpg\"\u003e           \u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003eDesigned in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/DSC02882.JPG\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003eTesting was completed on a Maha independent dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all of their engine calibration and dyno testing.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/FMTIA2-i30N-Litchfield-min.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eThe Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than \u003cstrong\u003e150%\u003c\/strong\u003e over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAs with all Forge motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/FMTIA2-Comparison_2.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_53439jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eWill this fit other intakes? The answer is \u003cstrong\u003eyes\u003c\/strong\u003e,\u003cstrong\u003e \u003c\/strong\u003eit will fit other manufacturers intakes that have an inlet pipe of 102mm (4”). This will not fit the OEM.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis is a simple installation and a modification that releases even more power from the Hyundai`s motor and fitting takes typically around 45 minutes and includes a full set of comprehensive \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/?download_id=544\" target=\"_blank\"\u003einstallation instructions.\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eManufactured from\u003cstrong\u003e 6082\u003c\/strong\u003e aerospace grade aluminium\u003c\/li\u003e\r\n\t\u003cli\u003eBlack anodised for ultimate protection and durability\u003c\/li\u003e\r\n\t\u003cli\u003eIncreased capacity of over \u003cstrong\u003e150%\u003c\/strong\u003e\n\u003c\/li\u003e\r\n\t\u003cli\u003eNo engine check lights (EML)\u003c\/li\u003e\r\n\t\u003cli\u003ePerfect fit with our \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003einduction kit\u003c\/a\u003e\n\u003c\/li\u003e\r\n\t\u003cli\u003eIncreased air flow\u003c\/li\u003e\r\n\t\u003cli\u003eHoses in this kit have been designed to include an expensive inner liner of modified silicone known as \u003cstrong\u003eFluorosilicone\u003c\/strong\u003e.\u003c\/li\u003e\r\n\t\u003cli\u003eMade in the UK\u003c\/li\u003e\r\n\t\u003cli\u003eLifetime warranty\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003cbr\u003e\r\n\u003cscript async charset=\"utf-8\" src=\"\/\/cdn.thinglink.me\/jse\/embed.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e\r\n\u003cgdiv\u003e\u003c\/gdiv\u003e","brand":"Forge Motorsport","offers":[{"title":"Blue Hose","offer_id":47717651972437,"sku":"FMTIA2-BLU","price":140.49,"currency_code":"GBP","in_stock":true},{"title":"Black Hose","offer_id":47717652005205,"sku":"FMTIA2-BLA","price":140.49,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hose","offer_id":47717652037973,"sku":"FMTIA2-PER","price":140.49,"currency_code":"GBP","in_stock":true},{"title":"Red Hose","offer_id":47717652070741,"sku":"FMTIA2-RED","price":140.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_58589jpeg.webp?v=1787168769"},{"product_id":"hyundai-i30nveloster-n-coolant-hose-kit-fmkc023","title":"Hyundai i30N\/Veloster N Coolant Hose Kit","description":"\u003cp style=\"text-align: center;\"\u003eFMKC023 is Forge Motorsports silicone hose kit for the Hyundai i30 N and Veloster N and is a direct replacement for the OE rubber coolant hoses. \u003cstrong\u003eWe have now added an extra hose in the kit so it is now compatible with both the manual and DCT transmission vehicles. \u003c\/strong\u003eThis is currently the only silicone coolant kit which offers this fitment on the Hyundai platform. \u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit_68833e50d6293_2jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit_68833e50b5b9f_0jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit_68833e50c60e4_1jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit_68833e50e5b92_3jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eWith the use of 3 ply silicone construction this hose kit will withstand pressures that can be experienced on tuned and remapped engines. They will long outlast the original hoses and with our \u003cstrong\u003elimited lifetime warranty on all Forge products\u003c\/strong\u003e, you can be sure these hoses won't let you down. Complete with all hose clamps required. \u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"inline-img\" src=\"\/userfiles\/Products\/FMKCO23%20-%20i30N%20Hoses\/FMKC023-i30N_Fitted_WebDescription2Small.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit_95862jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"inline-img\" src=\"\/userfiles\/Products\/FMKCO23%20-%20i30N%20Hoses\/FMKC023-i30N_Fitted_WebDescription1Small.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eAvailable in red, blue, performance blue, or black. Please select your choice in the options drop down tab when ordering. \u003c\/p\u003e\r\n\r\n\u003cp\u003eWe recommend you give yourself one hour to two hours to install all the hoses, remember that you will have to drain your coolant to fit these so make sure to have a tray to catch all the coolant.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/6.jpg\"\u003e\u003cbr\u003e\r\n\u003cscript async charset=\"utf-8\" src=\"\/\/cdn.thinglink.me\/jse\/embed.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Blue Hoses","offer_id":47717665898837,"sku":"FMKC023-BLU","price":144.86,"currency_code":"GBP","in_stock":true},{"title":"Performance Blue Hoses","offer_id":47717665931605,"sku":"FMKC023-PER","price":144.86,"currency_code":"GBP","in_stock":true},{"title":"Red Hoses","offer_id":47717665964373,"sku":"FMKC023-RED","price":144.86,"currency_code":"GBP","in_stock":true},{"title":"Black Hoses","offer_id":47717665997141,"sku":"FMKC023-BLA","price":144.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_i30NVeloster_N_Coolant_Hose_Kit_85901jpeg.webp?v=1787168791"},{"product_id":"hyundai-i30nveloster-n-carbon-fibre-engine-cover-fmec1","title":"Hyundai i30N\/Veloster N Carbon Fibre Engine Cover","description":"\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eThe Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in certain applications and in areas of extreme temperature, this can lead to discolouration or fading (yellowing) of the carbon fibre. Unfortunately due to this harsh and extreme environment, your Forge carbon fibre is not warrantied for that eventuality. All other aspects of your carbon fibre products are covered by our warranty process.\u003c\/em\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eForge Motorsport are pleased to present our carbon fibre engine cover for the Hyundai i30N.\u003c\/p\u003e\r\n\r\n\u003cp\u003eManufactured by an autoclave process using a vacuum (also known as liquid infusion) to draw the resin through the mould then pulling the raw carbon fibre cloth to the mould shape. This involves the use of up to 10BAR of pressure that is blown into a 100% billet mould to force the material out. This high amount of pressure ensures the carbon fibre is fully in contact with the surface of the mould, therefore, making sure the weave is tight, solid and strong; this process will also ensure there are no imperfections in the product.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe engine oil cap will relocate perfectly, or you can upgrade to the CNC billet \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003eForge oil cap\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eDesigned to locate in the OEM factory position\u003c\/li\u003e\r\n\t\u003cli\u003eFits perfectly with the Forge \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003eintake\u003c\/a\u003e\n\u003c\/li\u003e\r\n\t\u003cli\u003eFinished in high quality clear coat to ensure UV-protection and extra durability\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/FMEC1-i30N-EngineCoverBadge_WEB.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eIn the Box:\u003cbr\u003e\r\n1 x Forge Motorsport Hyundai i30N Carbon Engine Cover\u003cbr\u003e\r\n1 x \u003ca href=\"https:\/\/www.meguiars.co.uk\/shop\/\" target=\"_blank\"\u003eMeguiar’s Care Pouch\u003c\/a\u003e\u003cbr\u003e\r\n1 x Forge Motorsport \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Vinyl_Forge_Logo_Stickers_x3--product--892.html\" target=\"_blank\"\u003eDecal\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2 side-padding-md\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMEC1\/FMEC1-i30N-EngineCover-Fitted2_WEB.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2 side-padding-md\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMEC1\/FMEC1-i30N-EngineCover-Fitted1_WEB.jpg\"\u003e\u003cbr\u003e\r\n\u003cscript async charset=\"utf-8\" src=\"\/\/cdn.thinglink.me\/jse\/embed.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":47717670256981,"sku":"FMEC1","price":364.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_Carbon_Fibre_Engine_Cover_27339jpeg.webp?v=1787168798"},{"product_id":"hyundai-i30nveloster-nkona-n-dual-catch-can-and-expansion-tank-fmct5","title":"Hyundai i30N\/Veloster N\/Kona N Dual Catch Can and Expansion Tank","description":"\u003cp\u003e\u003cstrong\u003eHighlights\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eA drain plug for ease of emptying\u003c\/li\u003e\r\n\t\u003cli\u003eCoolant level indicator\u003c\/li\u003e\r\n\t\u003cli\u003eIntegrated dipstick’s for simple level inspection\u003c\/li\u003e\r\n\t\u003cli\u003eCNC machined anodised coolant cap cover\u003c\/li\u003e\r\n\t\u003cli\u003ePremium quality stainless steel reinforced oil resistant hoses with black external braiding\u003c\/li\u003e\r\n\t\u003cli\u003eInner tube is constructed from anti-static smooth fuel resistant nitrile rubber\u003c\/li\u003e\r\n\t\u003cli\u003eTemperature Range: -54°C to +150°C (-65°F to 300°F)\u003c\/li\u003e\r\n\t\u003cli\u003eThe engine cover can still be fitted after installation\u003c\/li\u003e\r\n\t\u003cli\u003eInstallation is straight forward with all necessary fittings and Forge detailed instructions included.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eHere we present FMCT5, a twin catch can and coolant expansion tank system for the Hyundai i30N, Veloster N, and Kona N. This design has been subject to a\u003cstrong\u003e vast amount of developmen\u003c\/strong\u003et and is a one of a kind product in the marketplace. \u003cstrong\u003eThis part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe FMCT5 is a direct replacement for the OE coolant expansion tank. The CAD laser cut alloy construction is \u003cstrong\u003eskilfully welded at Forge UK HQ\u003c\/strong\u003e. The expansion tank has a level indicator inside the filler neck, to make topping up easier, we have also machined a cap cover that slots over the top of the OEM cap to add to the \u003cstrong\u003epremium look.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Dual_Catch_Can_and_Expansion_Tank_89883jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThe twin catch can system is the definitive solution to effectively reduce sludge and carbon build up, in turn allowing the engine to both \u003cstrong\u003ebreathe and perform more efficiently\u003c\/strong\u003e. It can therefore be viewed as a \u003cstrong\u003egenuine performance enhancing product.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Dual_Catch_Can_and_Expansion_Tank_92119jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eOur system filters both PCV and intake breather systems to help keep your engine clean from harmful contaminants, including oil deposits, unused fuel vapours and moisture, which would ordinarily make their way back through to the inlet of the engine.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Dual_Catch_Can_and_Expansion_Tank_60154jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThere is a dip stick for each tank to measure the amount of deposit caught. This opening can also be used to pump out the captured contaminants or alternately you can use the drain plugs at the bottom of the tanks - the choice is yours!\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eAs with all Forge Motorsport products we have used superior braided hoses which are internally constructed from anti-static smooth fuel resistant nitrile rubber. This is combined with an outer cover made from reinforced stainless-steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be \u003cstrong\u003eresistant to both pressure expansion and vacuum collapse\u003c\/strong\u003e, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F).\u003c\/p\u003e\r\n\r\n\u003cp\u003eFMCT5 has now been developed to be compatible with Hyundai Veloster N and Kona N, as well as still fitting the i30N Mk3, and Mk3.5 (facelift). This product is available in our stealthy textured black powder coat finish.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h2\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30NVeloster_N_Boost_pipe--product--1882.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Boost_pipe_68737jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30NVeloster_N_Boost_pipe--product--1882.html\" target=\"_blank\"\u003eBoost Pipes\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Uprated_Intercooler_for_Hyundai_i30N--product--1713.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Uprated_Intercooler_for_Hyundai_i30N_92390jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Uprated_Intercooler_for_Hyundai_i30N--product--1713.html\" target=\"_blank\"\u003eIntercooler\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Oil_Cooler_Kit_for_Hyundai_i30N--product--1859.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_i30NVeloster_N_62871jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Oil_Cooler_Kit_for_Hyundai_i30N--product--1859.html\" target=\"_blank\"\u003eOil Cooler\u003c\/a\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cul\u003e\r\n\u003c\/ul\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":47717674811733,"sku":"FMCT5-BLA","price":437.74,"currency_code":"GBP","in_stock":true},{"title":"Alloy","offer_id":47717674844501,"sku":"FMCT5-ALL","price":437.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_i30NVeloster_N_Dual_Catch_Can_and_Expansion_Tank_92119jpeg.webp?v=1787168815"},{"product_id":"hyundai-i30nveloster-n-boost-pipe-fmbp4","title":"Hyundai i30N\/Veloster N Boost pipe","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color:#FF0000;\"\u003eThis will NOT work with the OEM intercooler. This product will only work with aftermarket intercoolers with an outlet size of 63-67mm (Cold Side). It works flawlessly with the Forge intercooler \u003c\/span\u003e\u003cspan style=\"color:#0000FF;\"\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Uprated_Intercooler_for_Hyundai_i30n_and_Veloster_N--product--1713.html\"\u003eFMINT15\u003c\/a\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eAfter already developing many performance upgrades for the Hyundai I30N \u0026amp; Veloster N the Forge Motorsport engineers have found another area for improvement of Hyundai’s Hot hatch. This time it is the boost pipe which runs from the outlet of the intercooler to the intake manifold.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhen looking at the OE hose it was clear to see there was room for improvement so after a lot of testing, we settled on a 70mm outer diameter mandrel bent alloy hard pipe and silicone joiners. Alloy billet CNC machine bosses are used, so that all original attachments fit perfectly. When compared to the OE hose the improvements are clear to see, the inlet bore diameter has now been increased from 51mm to 70mm outer diameter.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe increase in diameter of the Forge pipe work allows for a greater air flow which in turn maximises the volume of air being forced into the engine. This has the benefit of improving both performance and efficiency especially on vehicles running after market software. This is a must have product for anyone trying to achieve the maximum performance from their I30N\/Veloster N.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe have also incorporated a 1\/8th\" water meth\/nitrous boss into the design for tuners to keep inlet air temperatures on the safer side while pushing the 2.0 Hyundai engine to its limits and aiding the option for a maximum power output.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhy not add \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Gold_Heat_Resistant_Wrap--product--1697.html\" target=\"_blank\"\u003egold tape\u003c\/a\u003e to the alloy pipe to further reflect any heat soak from the engine and keep inlet charge temperatures as low as possible. The Gold tape comes on a 5metre roll allowing you to apply it to your Forge Motorsport product.\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003eSupplied with a durable black powder coated finish or Raw aluminium.\u003c\/li\u003e\r\n\t\u003cli\u003eMinimal airflow disruption\u003c\/li\u003e\r\n\t\u003cli\u003eIncreased diameter giving increased flow compared to OEM\u003c\/li\u003e\r\n\t\u003cli\u003eMandrel bent single piece aluminium pipework\u003c\/li\u003e\r\n\t\u003cli\u003eCNC machined billet couplers\u003c\/li\u003e\r\n\t\u003cli\u003eThe Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as \u003cstrong\u003eFluoro silicone\u003c\/strong\u003e. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically. The use of a \u003cstrong\u003eFluoro silicone\u003c\/strong\u003e liner ensures that Forge silicone hoses are the clear market leader\u003c\/li\u003e\r\n\t\u003cli\u003eNo engine check lights (EML)\u003c\/li\u003e\r\n\t\u003cli\u003eLifetime warranty\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis product is designed, developed, and manufactured entirely in Great Britain and is covered by our worldwide lifetime warranty\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/5.jpg\"\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Plain Alloy","offer_id":47717677072725,"sku":"FMBP4-PLA","price":183.48,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":47717677105493,"sku":"FMBP4-BLA","price":183.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_i30NVeloster_N_Boost_pipe_68737jpeg.webp?v=1787168813"},{"product_id":"hyundai-veloster-n-intercooler-fmint22","title":"Hyundai Veloster N Intercooler","description":"\u003cp\u003eWe are pleased to release the Forge intercooler for the Veloster N\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e*If you use a Veloster N for fast road or have a high performance tune in a hot climate this product is essential*\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eUtilising our industry leading bar and plate design, alongside Solidworks CAD and flow simulation design (Computational Fluid Dynamics CFD) we developed our high flow cast end tanks. The turbo side endtanks feature an internal divider to ensure the full volume of the stepped core is utilised. \u003c\/p\u003e\r\n\r\n\u003cp\u003eThe bar and plate core has over 129% more volume and an increase of frontal surface area over 71% (over the stock cooler) meaning the Forge intercooler is the largest currently available on the market. To ensure we deliver optimum cooling efficiency, the development team created a fabricated ducting system that has been skilfully integrated into the superior design of this product this ensures fitment to the inner contour of the Veloster N front bumper.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe inlet and outlet sizes have been increased in diameter to 65mm, giving an increase of 27% more volume over the stock cooler to give perfect flow. The development team also added a custom hard pipe increasing the diameter by 14 mm to 64mm up from the factory 50mm. This replaces the stock factory pipe on the hot side to ensure this package gives you all you need for maximum performance gains on high levels of tune.The boost pipe and intercooler come in our standard black textured finish powder coat for maximum longevity.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"centre-block\" src=\"\/userfiles\/images\/sys\/products\/Hyundai_Veloster_N_intercooler_62620jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eVarious core designs where tested in the development of the Veloster N intercooler with us finally deciding to use a high-quality Bar and Plate design as used on our highly successful Audi RS3 and TTRS 8s intercoolers resulting in minimal pressure drop.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe results were fantastic with IATS (inlet air temps) being reduced by half and resulting in tremendous gains on tuned vehicles.\u003c\/p\u003e\r\n\r\n\u003cp\u003eDuring our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point. By doing this, it gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAfter more than six pulls on the dyno we still had super safe IATs and the Forge intercooler gave results of 24°C, halving the factory’s intercooler intake temps from 48°C. These tests took place in relatively cold conditions with an ambient dyno cell temperature of 15°C proving how inefficient the stock intercooler is. In the summer months the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle the results will be even more detrimental and can lead to possible premature engine wear.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/images\/FMINT15\/FMINT15-COMPARISON-DYNO-WEB.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis intercooler combined with our intake, and a quality aftermarket cat back exhaust will deliver you unparalleled levels of performance, the final testing results were very notable; not only did the Forge intercooler halve the IATS but significantly increased both power and torque over Hyundai’s claimed figures of 275bhp and 278lb\/ft of torque to an impressive 307bhp and 347lb\/ft of torque.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/6.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":47717682446677,"sku":"FMINT22","price":646.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_Veloster_N_intercooler_62620jpeg.webp?v=1787168822"},{"product_id":"hyundai-i30n-and-veloster-n-gear-knob-fmgk1","title":"Hyundai i30N and Veloster N Gear Knob","description":"\u003cp\u003eThe new FMGK1 has been designed and machined specifically to fit the Hyundai i30N\/i20N\/Veloster N, this shift knob is a result of extensive development. The aluminium billet chosen for this project is machined here at Forge HQ, in Gloucestershire UK. It’s shape, like a piston head, combines functionality and design, fitting perfectly in the hand for the short precise shifts.\u003c\/p\u003e\r\n\r\n\u003cp\u003eMany months of testing and many different prototype examples have been made in order to find the perfect weighted shift knob; we have now created the perfect bespoke Hyundai shift knob.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30N_and_Veloster_Gear_Knob_23060jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30N_and_Veloster_Gear_Knob_28593jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30N_and_Veloster_Gear_Knob_48957jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eNot to be confused with universal fitting shift knobs this is a straight replacement for the OE equipment which has been a fully engineered solution to improve your overall driving experience of your Hyundai N vehicle.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMain benefits\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eBespoke design to enhance interior.\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eOptimised shape for comfort and grip.\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003ePerfect weighting for slick gear changing.\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003eAvailable in brushed, anodised black and anodised red finish.\u003c\/p\u003e\r\n\r\n\u003cp\u003eOur products are packaged using high density foam to guarantee they are delivered to your door in perfect condition.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30N_and_Veloster_Gear_Knob_52841jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe design has been created to reflect the N style and will look resplendent in your car.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eKnob weight\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e176.4 grams or 6.22 ounces\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/1.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Black Anodised","offer_id":47717687066965,"sku":"FMGK1-BLA","price":89.53,"currency_code":"GBP","in_stock":true},{"title":"Brushed Alloy","offer_id":47717687099733,"sku":"FMGK1-ALI","price":89.53,"currency_code":"GBP","in_stock":true},{"title":"Red Anodised","offer_id":47717687132501,"sku":"FMGK1-RED","price":89.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_i30N_and_Veloster_N_Gear_Knob_69802jpeg.webp?v=1787168834"},{"product_id":"hyundai-veloster-n-facelift-intercooler-including-dct-fmint31","title":"Hyundai Veloster N Facelift Intercooler (Including DCT)","description":"\u003cp\u003eWe are pleased to present the Forge intercooler for the Veloster N facelift including DCT\u003c\/p\u003e\r\n\r\n\u003cp align=\"center\"\u003e\u003cstrong\u003e*If you use a Veloster N for fast road or have a high performance tune in a hot climate this product is essential*\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eUtilising our industry leading bar and plate design, alongside Solidworks CAD and flow simulation design (Computational Fluid Dynamics CFD) we developed our high flow cast end tanks. The turbo side endtanks feature an internal divider to ensure the full volume of the stepped core is utilised. The bar and plate core has over 129% more volume and an increase of frontal surface area over 71% (over the stock cooler) meaning the Forge intercooler is the largest currently available on the market. To ensure we deliver optimum cooling efficiency, the development team created a fabricated ducting system that has been skilfully integrated into the superior design of this product this ensures fitment to the inner contour of the Veloster N front bumper.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe inlet and outlet sizes have been increased in diameter to 65mm, giving an increase of 27% more volume over the stock cooler to give perfect flow. The development team also added a custom hard pipe increasing the diameter by 14 mm to 64mm up from the factory 50mm. This replaces the stock factory pipe on the hot side to ensure this package gives you all you need for maximum performance gains on high levels of tune.The boost pipe and intercooler come in our standard black textured finish powder coat for maximum longevity.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_Veloster_N_Facelift_Intercooler_Including_DCT_83134jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_Veloster_N_Facelift_Intercooler_Including_DCT_86501jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_Veloster_N_Facelift_Intercooler_Including_DCT_24201jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eVarious core designs where tested in the development of the Veloster N intercooler with us finally deciding to use a high-quality Bar and Plate design as used on our highly successful Audi RS3 and TTRS 8s intercoolers resulting in minimal pressure drop.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe results were fantastic with IATS (inlet air temps) being reduced by half and resulting in tremendous gains on tuned vehicles.\u003c\/p\u003e\r\n\r\n\u003cp\u003eDuring our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point. By doing this, it gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.\u003c\/p\u003e\r\n\r\n\u003cp\u003eAfter more than six pulls on the dyno we still had super safe IATs and the Forge intercooler gave results of 24°C, halving the factory’s intercooler intake temps from 48°C. These tests took place in relatively cold conditions with an ambient dyno cell temperature of 15°C proving how inefficient the stock intercooler is. In the summer months the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle the results will be even more detrimental and can lead to possible premature engine wear.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FMINT15\/FMINT15-COMPARISON-DYNO-WEB.jpg\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Forge Motorsport front mount intercooler has all the necessary hardware to install the kit in approximately 2.5 hours depending on competency and tools available.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/6.jpg\"\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":47717759189333,"sku":"FMINT31","price":646.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Hyundai_Veloster_N_Facelift_Intercooler_Including_DCT_24201jpeg.webp?v=1787168953"},{"product_id":"boost-pipe-for-the-kona-n-hyundai-i30n-mk35-facelift-and-veloster-n-facelift-fmbp7","title":"Boost Pipe for the Kona N, Hyundai i30N MK3.5 Facelift, and Veloster N Facelift","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color:#FF0000;\"\u003e\u003cstrong\u003eThis will NOT work with the OEM intercooler. This product will only work with aftermarket intercoolers with an outlet size of 63-67mm (Cold Side). \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color:#FF0000;\"\u003e\u003cstrong\u003eIt works flawlessly with our \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift--product--2105.html\"\u003eHyundai i30N MK3.5 Intercooler\u003c\/a\u003e, \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_Veloster_N_Facelift_Intercooler_Including_DCT--product--2112.html\"\u003eHyundai Veloster N Facelift Intercooler (including DCT)\u003c\/a\u003e, and our \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_Hyundai_Kona_N--product--2202.html\"\u003eHyundai Kona N Intercooler\u003c\/a\u003e. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eSupplied with a durable black powder coated finish\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eMinimal airflow disruption\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eIncreased diameter giving increased flow compared to OEM\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eMandrel bent single piece aluminium pipework\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eCNC machined billet couplers\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eNo engine check lights (EML)\u003c\/strong\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cstrong\u003eLifetime warranty\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eAfter already developing many performance upgrades for the Hyundai I30N \u0026amp; Veloster N, the Forge Motorsport engineers have found another area for improvement on the Hyundai’s hot hatch. This time it is the boost pipe which runs from the outlet of the intercooler, to the throttle body (cold side).\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhen looking at the OE hard pipe it was clear to see there was room for improvement. We increased the bore diameter by 20%, which in testing resulted in a faster spool up and a crisper power delivery. We developed a \u003cstrong\u003e66mm internal diameter\u003c\/strong\u003e mandrel bent alloy hard pipe to compliment the transition of smooth air from the cold side of the intercooler, which also matched the size of the OEM throttle body perfectly. Accompanied with fluro lined high quality silicone joiners, this upgrade is the perfect addition to any highly tuned engine.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_31461jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_77250jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_40183jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eAlloy billet CNC machined bosses are welded in-house to the mandrel bent pipe work by our highly skilled fabricators, so that all the original attachments fit perfectly. When compared to the OE hose the improvements are clear to see, the inlet bore diameter has now been increased from 55mm to 66mm internal diameter.\u003c\/p\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_49614jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\r\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_13356jpeg.jpg\"\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eAn increase in diameter of the Forge pipe work allows for a greater air flow, which in-turn, maximises the volume of air being forced into the engine. This has the benefit of \u003cstrong\u003eimproving both performance and efficiency,\u003c\/strong\u003e especially on vehicles running aftermarket software. This is a must have product for anyone trying to achieve the maximum performance from their I30N\/Veloster N\/Kona N.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWe have also incorporated a 1\/8\u003csup\u003eth\u003c\/sup\u003e NPT water meth\/nitrous boss into the design that is housed directly in front of the throttle body for maximum efficiency. This assists tuners and owners in hot climates to keep inlet air temperatures on the safer side while pushing the 2.0 Hyundai engine to its limits, for a maximum power output.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhy not add \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Gold_Heat_Resistant_Wrap--product--1697.html\" target=\"_blank\"\u003egold tape\u003c\/a\u003e to the alloy pipe to further reflect any heat soak from the engine and keep inlet charge temperatures as low as possible. The Gold tape comes on a 5metre roll, allowing you to apply it to your Forge Motorsport product.\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis product is designed, developed, and manufactured entirely in Great Britain and is covered by our worldwide lifetime warranty\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n\r\n\u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h1\u003e\r\n\r\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1712.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_24245jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eOur \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i20N_Atmospheric_and_Recirculating_Dump_Valve--product--2117.html\" target=\"_blank\"\u003euprated valve\u003c\/a\u003e for the Hyundai i20N, Kona N, and the Veloster N Line has been \u003cb\u003eexpertly manufactured\u003c\/b\u003e and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, this valve can be used either as a fully atmospheric (blow off) valve, or a recirculating valve!\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/MultiApplication_Oil_Cap_18657jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThis billet aluminium \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003eoil cap\u003c\/a\u003e will replace your OEM one, leaving your engine bay with a premium and high quality aesthetic. \u003cspan style=\"word-spacing: normal;\"\u003eThis cap is available in a choice of body colour (black or polished) and a choice of cap top insert (black or polished). \u003cb\u003eThis perfectly compliments your i30N!\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_53439jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp style=\"text-align: center;\"\u003eThe \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003eFMTIA10\u003c\/a\u003e is proven to benefit the engines performance. With one of the weak links on the i30N and intake system being the restrictive aluminium inlet pipe we found something more was needed on stage 1 and 2 tuned vehicles. \u003cstrong\u003eThe results speak for themselves.\u003c\/strong\u003e\u003cspan style=\"word-spacing: normal;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\r\n","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":47717765972309,"sku":"FMBP7","price":195.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_31461jpeg.webp?v=1787168964"},{"product_id":"ast-lowering-springs-for-hyundai-veloster-1-6mpi-1-6gdi-04-2011-2018-front-35-rear-25","title":"AST Lowering Springs For HYUNDAI VELOSTER 1.6MPi\/1.6GDi 04\/2011 - 2018, Front 25 , Rear 25","description":"Set of AST Lowering Springs to lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. Cold-coiled on the best Wafios coiling machines. Lifetime warranty against breaking.\u003cbr\u003e\n\u003cbr\u003e\nThe AST Lowering springs offer a solution to reduce your vehicle’s center of gravity while preserving the comfort you’re accustomed to from the original equipment manufacturer (OEM) springs. These springs serve as a direct replacement for your OEM springs and have been developed especially for each vehicle specific. Crafted from premium materials using the best Wafios coiling machines. Their progressive design strikes the perfect balance between lowering your ride and enhancing performance. With a broad range of applications, spanning over 2500 different vehicle models from 1966 to the present day, you can trust these springs to suit your needs. Plus, these springs come backed by a lifetime warranty against breaking, ensuring your peace of mind as you hit the road.","brand":"AST","offers":[{"title":"Default Title","offer_id":48075525882197,"sku":"AST-ASTLS-14-1010","price":161.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/AST_ALS_Lowering_Spring_kits_3b3e8ee2-7448-47bf-b5dc-f5a0d51955fa.webp?v=1787170969"},{"product_id":"milltek-plug-play-remote-control-system-for-oe-milltek-sport-exhausts-for-hyundai-kia-veloster-n-2-0l-turbo-275hp-non-opf-gpf-models-only-2019-2026","title":"Milltek Plug \u0026 Play Remote Control System for OE \u0026 Milltek Sport Exhausts For Hyundai \/ Kia  Veloster  N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) 2019-2026","description":"Active Sound (ASU) from Milltek Sport is an innovative solution to enable a user controllable exhaust sound to be made on vehicles that traditionally lack the sound and tone that owners desire; suitable for a wide range of vehicles, the growing range includes HybridÍs, EV and diesels. Including 8 selectable sound files, volume, pitch and tone adjustment with user configurable profiles all controlled via MilltekÍs own iPhone or Android app\u003cbr\u003e\u003cbr\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003cp\u003eEvery Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.\u003c\/p\u003e\u003cp\u003eMandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSystem Type: Active Valve Control\u003c\/li\u003e\n\u003cli\u003eEC Approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHyundai Veloster N N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) (JS) — 2019 onwards\u003c\/li\u003e\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Default Title","offer_id":50576656302421,"sku":"SSXHY170","price":270.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/SSXHY170_1__09217.1707916394_d884d3b6-d7d6-417a-bc79-f738da636ee6.webp?v=1787222439"},{"product_id":"milltek-non-resonated-louder-with-gt-139-cerakote-black-tips-for-hyundai-kia-veloster-n-2-0l-turbo-275hp-non-opf-gpf-models-only-2019-2026","title":"Milltek Non-Resonated (Louder) with GT-139 Cerakote Black Tips For Hyundai \/ Kia  Veloster  N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) 2019-2026","description":"\u003cp\u003eEvery Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.\u003c\/p\u003e\u003cp\u003eMandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSystem Type: Cat-back\u003c\/li\u003e\n\u003cli\u003ePipe Diameter: 76.2mm (3\")\u003c\/li\u003e\n\u003cli\u003eTip Style: 139mm GT\u003c\/li\u003e\n\u003cli\u003eEC Approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHyundai Veloster N N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) (JS) — 2019 onwards\u003c\/li\u003e\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Default Title","offer_id":50576656499029,"sku":"SSXHY184","price":1449.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/ssxhy184.webp?v=1787222436"},{"product_id":"milltek-non-resonated-louder-with-gt-139-polished-tips-for-hyundai-kia-veloster-n-2-0l-turbo-275hp-non-opf-gpf-models-only-2019-2026","title":"Milltek Non-Resonated (Louder) with GT-139 Polished Tips For Hyundai \/ Kia  Veloster  N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) 2019-2026","description":"\u003cp\u003eEvery Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.\u003c\/p\u003e\u003cp\u003eMandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSystem Type: Cat-back\u003c\/li\u003e\n\u003cli\u003ePipe Diameter: 76.2mm (3\")\u003c\/li\u003e\n\u003cli\u003eTip Style: 139mm GT\u003c\/li\u003e\n\u003cli\u003eEC Approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHyundai Veloster N N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) (JS) — 2019 onwards\u003c\/li\u003e\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Default Title","offer_id":50576657482069,"sku":"SSXHY183","price":1367.96,"currency_code":"GBP","in_stock":true}]},{"product_id":"milltek-resonated-with-gt-139-cerakote-black-tips-for-hyundai-kia-veloster-n-2-0l-turbo-275hp-non-opf-gpf-models-only-2019-2026","title":"Milltek Resonated with GT-139 Cerakote Black Tips For Hyundai \/ Kia  Veloster  N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) 2019-2026","description":"\u003cp\u003eEvery Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.\u003c\/p\u003e\u003cp\u003eMandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSystem Type: Cat-back\u003c\/li\u003e\n\u003cli\u003ePipe Diameter: 76.2mm (3\")\u003c\/li\u003e\n\u003cli\u003eTip Style: 139mm GT\u003c\/li\u003e\n\u003cli\u003eEC Approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHyundai Veloster N N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) (JS) — 2019 onwards\u003c\/li\u003e\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Default Title","offer_id":50576657613141,"sku":"SSXHY186","price":1561.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/ssxhy186.webp?v=1787222436"},{"product_id":"milltek-resonated-with-gt-139-polished-tips-for-hyundai-kia-veloster-n-2-0l-turbo-275hp-non-opf-gpf-models-only-2019-2026","title":"Milltek Resonated with GT-139 Polished Tips For Hyundai \/ Kia  Veloster  N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) 2019-2026","description":"\u003cp\u003eEvery Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.\u003c\/p\u003e\u003cp\u003eMandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSystem Type: Cat-back\u003c\/li\u003e\n\u003cli\u003ePipe Diameter: 76.2mm (3\")\u003c\/li\u003e\n\u003cli\u003eTip Style: 139mm GT\u003c\/li\u003e\n\u003cli\u003eEC Approved: No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Vehicles\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHyundai Veloster N N 2.0L Turbo 275hp (Non-OPF\/GPF Models Only) (JS) — 2019 onwards\u003c\/li\u003e\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Default Title","offer_id":50576657809749,"sku":"SSXHY185","price":1479.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/ssxhy185.webp?v=1787222436"},{"product_id":"ast-5200-series-2-way-suspension-for-hyundai-pd-i30n-2017-2021-riv-h3004s","title":"AST 5200 series 2 - WAY Suspension For Hyundai PD i30N 2017 - 2021","description":"\u003cp\u003e2-WAY adjustable coilovers in rebound and compression, incl canisters.\u003c\/p\u003e\n\n\u003cp\u003eSet of MONOTUBE coilovers, 2WAY adjustable in rebound, compression and ride height. This set includes external reservoirs and, where applicable, camber-adjustable front Top Mounts and solid rear Top Mounts.\u003c\/p\u003e\n\n\u003cp\u003eYou are that person who takes the performance of your car more serious. AST 2-WAY MOTORSPORT SUSPENSION is primarily engineered for track enthusiasts. Allowing you to experience sports car driving at its finest. Challenge your vehicle by adjusting the compression and rebound separately with a remote reservoir. Each adjustment position provides distinct feedback, delivering a unique driving sensation. The inverted strut design is engineered to handle heavy side loads and braking forces. Both the front and rear dampers in this kit feature a MONOTUBE coilover design. You have the flexibility to adjust spring rates on these dampers. With this suspension you have the capability to fine-tune and customize two critical aspects of your vehicle’s suspension. You can adjust the rebound, means you can control the return to extension of your dampers, enabling you to attain the ideal road balance tailored to your specific requirements. With 12 distinct positions to choose from, each adjustment delivers distinct feedback and a unique driving experience. Besides that you can adjust the compression adjustment of this suspension. It allows you to control how quickly the suspension compresses (moves inwards) when the vehicle encounters changing circumstances on the road or track. In performance driving or racing scenarios, the ability to adjust compression damping can enhance handling characteristics. It’s important to balance the rebound with the compression adjustment. You can stiffen the rebound \/ compression settings to reduce body roll during cornering, improve responsiveness, and maintain tire contact with the road for better traction. But also fine-tune the ride comfort by controlling the compression. This set of suspension also includes, where applicable, camber-adjustable front Top Mounts and solid rear Top Mounts. The camber adjustment will offer you more wheel adjustment and allow this geometry to be altered to transform front -end grip. Springs are included.\u003c\/p\u003e\n\n\u003cp\u003eThese dampers can adjust in rebound (return to extension) and compression adjustment (moves inwards) when the vehicle encounters changing circumstances on the road or track. Including external reservoirs.\u003c\/p\u003e","brand":"AST","offers":[{"title":"Default Title","offer_id":51739072430421,"sku":"AST-RIV-H3004S","price":3800.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/RIV-SAMPLE-1_result_cba0d086-1e70-45c5-9fd5-4fdf2fb46809.webp?v=1761164927"},{"product_id":"ast-5300-series-3-way-suspension-for-hyundai-js-veloster-n-2018-present-rac-h3004s","title":"AST 5300 series 3 - WAY Suspension For Hyundai JS Veloster N 2018 - present","description":"\u003cp\u003e3-WAY adjustable coilovers in rebound, low- and high speed compression, incl canisters.\u003c\/p\u003e\n\n\u003cp\u003eSet of MONOTUBE coilovers, 3WAY adjustable in rebound, high- and lowspeed compression and ride-height. This set includes external reservoirs and, where applicable, camber-adjustable front Top Mounts and solid rear Top Mounts.\u003c\/p\u003e\n\n\u003cp\u003eAre you the most dedicated enthusiast on the race track? Elevate your racing game to a championship level by using all options that AST 3-WAY MOTORSPORT SUSPENSION has to give. Challenge your vehicle by adjusting the rebound and the low- and highspeed compression adjustment separately with a remote reservoir. Each adjustment position provides distinct feedback, delivering a unique driving sensation. The inverted strut design is engineered to handle heavy side loads and braking forces. Both the front and rear dampers in this kit feature a MONOTUBE coilover design. You have the flexibility to adjust spring rates on these dampers. With this suspension you have the capability to fine-tune and customize three critical aspects of your vehicle’s suspension. You can adjust the rebound, means you can control the return to extension of your dampers. With 12 distinct positions to choose from, each adjustment delivers distinct feedback and a unique driving experience. Besides that you can adjust the compression adjustment of this suspension. It allows you to control how quickly the suspension compresses (moves inwards) when the vehicle encounters changing circumstances on the road or track. With this kit you can adjust low- and high speed compression adjustment separately. Low-speed compression refers to the suspension reacts to gentle and gradual compression forces. High-speed compression addresses rapid and forceful impacts. It’s important to balance the rebound with the compression adjustment. You can stiffen the rebound \/ compression settings to reduce body roll during cornering, improve responsiveness, and maintain tire contact with the road for better traction. But also fine-tune the ride comfort by controlling the compression. This set of suspension also includes, where applicable, camber-adjustable front Top Mounts and solid rear Top Mounts. The camber adjustment will offer you more wheel adjustment and allow this geometry to be altered to transform front -end grip.\u003c\/p\u003e\n\n\u003cp\u003eThese dampers can adjust in rebound (return to extension) and high- and lowspeed compression separate adjustment (moves inwards) when the vehicle encounters changing circumstances on the road or track. Including external reservoirs.\u003c\/p\u003e ","brand":"AST","offers":[{"title":"Default Title","offer_id":51739073020245,"sku":"AST-RAC-H3004S","price":4050.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/RAC-SAMPLE-1_61abc5b7-769e-4daa-ac80-3ae93015230c.webp?v=1787237780"},{"product_id":"ast-5300-series-3-way-suspension-for-hyundai-pd-i30n-2017-2021-rac-h3004s","title":"AST 5300 series 3 - WAY Suspension For Hyundai PD i30N 2017 - 2021","description":"\u003cp\u003e3-WAY adjustable coilovers in rebound, low- and high speed compression, incl canisters.\u003c\/p\u003e\n\n\u003cp\u003eSet of MONOTUBE coilovers, 3WAY adjustable in rebound, high- and lowspeed compression and ride-height. This set includes external reservoirs and, where applicable, camber-adjustable front Top Mounts and solid rear Top Mounts.\u003c\/p\u003e\n\n\u003cp\u003eAre you the most dedicated enthusiast on the race track? Elevate your racing game to a championship level by using all options that AST 3-WAY MOTORSPORT SUSPENSION has to give. Challenge your vehicle by adjusting the rebound and the low- and highspeed compression adjustment separately with a remote reservoir. Each adjustment position provides distinct feedback, delivering a unique driving sensation. The inverted strut design is engineered to handle heavy side loads and braking forces. Both the front and rear dampers in this kit feature a MONOTUBE coilover design. You have the flexibility to adjust spring rates on these dampers. With this suspension you have the capability to fine-tune and customize three critical aspects of your vehicle’s suspension. You can adjust the rebound, means you can control the return to extension of your dampers. With 12 distinct positions to choose from, each adjustment delivers distinct feedback and a unique driving experience. Besides that you can adjust the compression adjustment of this suspension. It allows you to control how quickly the suspension compresses (moves inwards) when the vehicle encounters changing circumstances on the road or track. With this kit you can adjust low- and high speed compression adjustment separately. Low-speed compression refers to the suspension reacts to gentle and gradual compression forces. High-speed compression addresses rapid and forceful impacts. It’s important to balance the rebound with the compression adjustment. You can stiffen the rebound \/ compression settings to reduce body roll during cornering, improve responsiveness, and maintain tire contact with the road for better traction. But also fine-tune the ride comfort by controlling the compression. This set of suspension also includes, where applicable, camber-adjustable front Top Mounts and solid rear Top Mounts. The camber adjustment will offer you more wheel adjustment and allow this geometry to be altered to transform front -end grip.\u003c\/p\u003e\n\n\u003cp\u003eThese dampers can adjust in rebound (return to extension) and high- and lowspeed compression separate adjustment (moves inwards) when the vehicle encounters changing circumstances on the road or track. Including external reservoirs.\u003c\/p\u003e ","brand":"AST","offers":[{"title":"Default Title","offer_id":51739073053013,"sku":"AST-RAC-H3004S","price":4050.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/RAC-SAMPLE-1_d75aa302-b2d1-4e43-9db1-5dfb5e85dc5f.webp?v=1787237778"},{"product_id":"eibach-pro-kit-for-hyundai-veloster-turbo-16l-turbo-4247140","title":"Eibach PRO-KIT for HYUNDAI Veloster Turbo 1.6L Turbo (4247.140)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eHigh Performance Handling and Aggressive Good Looks.\u003c\/li\u003e \u003cli\u003eLower Center of Gravity.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster\u003c\/li\u003e \u003cli\u003eProgressive Spring Design for Excellent Ride Quality.\u003c\/li\u003e \u003cli\u003eFront: +69.85mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52605775446357,"sku":"4247.140","price":381.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-pro-kit_a7a76ce3-05e4-4942-a78a-b5d567b5e033.webp?v=1787172457"},{"product_id":"eibach-end-link-kit-for-hyundai-veloster-turbo-ak41-42-046-02-02","title":"Eibach END LINK KIT for HYUNDAI Veloster Turbo (AK41-42-046-02-02)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eFully Adjustable End Link System for Tuning Sway Bar Preload.\u003c\/li\u003e \u003cli\u003eHeavy Duty Chromoly Rod Ends.\u003c\/li\u003e \u003cli\u003ePrecision Fit Misalignment Spacers and Hardware Included.\u003c\/li\u003e \u003cli\u003eEasy to Adjust Hex Bodies.\u003c\/li\u003e \u003cli\u003eSold as a pair.\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606757830997,"sku":"AK41-42-046-02-02","price":130.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-endlink-short_c62ff048-3c0f-4285-85e8-01a8436f707c.webp?v=1787172664"},{"product_id":"eibach-end-link-kit-for-hyundai-veloster-turbo-r-spec-ak41-42-046-02-02","title":"Eibach END LINK KIT for HYUNDAI Veloster Turbo R-Spec (AK41-42-046-02-02)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eFully Adjustable End Link System for Tuning Sway Bar Preload.\u003c\/li\u003e \u003cli\u003eHeavy Duty Chromoly Rod Ends.\u003c\/li\u003e \u003cli\u003ePrecision Fit Misalignment Spacers and Hardware Included.\u003c\/li\u003e \u003cli\u003eEasy to Adjust Hex Bodies.\u003c\/li\u003e \u003cli\u003eSold as a pair.\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606757962069,"sku":"AK41-42-046-02-02","price":130.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-endlink-short_829e2642-af8a-4ffc-a288-631b921b2b17.webp?v=1787172667"},{"product_id":"eibach-end-link-kit-for-hyundai-veloster-turbo-ak41-42-046-02-20","title":"Eibach END LINK KIT for HYUNDAI Veloster Turbo (AK41-42-046-02-20)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eFully Adjustable End Link System for Tuning Sway Bar Preload.\u003c\/li\u003e \u003cli\u003eHeavy Duty Chromoly Rod Ends.\u003c\/li\u003e \u003cli\u003ePrecision Fit Misalignment Spacers and Hardware Included.\u003c\/li\u003e \u003cli\u003eEasy to Adjust Hex Bodies.\u003c\/li\u003e \u003cli\u003eSold as a pair.\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606758781269,"sku":"AK41-42-046-02-20","price":130.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_277761e9-81f0-459d-815a-164a304cdb1a.webp?v=1771657824"},{"product_id":"eibach-end-link-kit-for-hyundai-veloster-turbo-r-spec-ak41-42-046-02-20","title":"Eibach END LINK KIT for HYUNDAI Veloster Turbo R-Spec (AK41-42-046-02-20)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eFully Adjustable End Link System for Tuning Sway Bar Preload.\u003c\/li\u003e \u003cli\u003eHeavy Duty Chromoly Rod Ends.\u003c\/li\u003e \u003cli\u003ePrecision Fit Misalignment Spacers and Hardware Included.\u003c\/li\u003e \u003cli\u003eEasy to Adjust Hex Bodies.\u003c\/li\u003e \u003cli\u003eSold as a pair.\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606759010645,"sku":"AK41-42-046-02-20","price":130.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_e80ed5ed-8746-4069-88df-a16acfbfb599.webp?v=1771657829"},{"product_id":"eibach-pro-kit-for-hyundai-veloster-turbo-e10-42-047-04-22","title":"Eibach PRO-KIT for HYUNDAI Veloster Turbo (E10-42-047-04-22)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eHigh Performance Handling and Aggressive Good Looks.\u003c\/li\u003e \u003cli\u003eLower Center of Gravity.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster\u003c\/li\u003e \u003cli\u003eProgressive Spring Design for Excellent Ride Quality.\u003c\/li\u003e \u003cli\u003eFront: 1.0 in\u003c\/li\u003e \u003cli\u003eRear: 1.0 in\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606771822933,"sku":"E10-42-047-04-22","price":381.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e10420470422-veloster-1.webp?v=1787172739"},{"product_id":"eibach-pro-kit-for-hyundai-veloster-turbo-r-spec-e10-42-047-04-22","title":"Eibach PRO-KIT for HYUNDAI Veloster Turbo R-Spec (E10-42-047-04-22)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eHigh Performance Handling and Aggressive Good Looks.\u003c\/li\u003e \u003cli\u003eLower Center of Gravity.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster\u003c\/li\u003e \u003cli\u003eProgressive Spring Design for Excellent Ride Quality.\u003c\/li\u003e \u003cli\u003eFront: 0.8 in\u003c\/li\u003e \u003cli\u003eRear: 0.8 in\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606771855701,"sku":"E10-42-047-04-22","price":381.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e10420470422-veloster-1_f08dbdaf-a128-4d2c-be8c-e789a14d20bb.webp?v=1787172739"},{"product_id":"eibach-pro-kit-for-hyundai-veloster-n-e10-42-047-05-22","title":"Eibach PRO-KIT for HYUNDAI Veloster N (E10-42-047-05-22)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eHigh Performance Handling and Aggressive Good Looks.\u003c\/li\u003e \u003cli\u003eLower Center of Gravity.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster\u003c\/li\u003e \u003cli\u003eProgressive Spring Design for Excellent Ride Quality.\u003c\/li\u003e \u003cli\u003eFront: 0.6 in\u003c\/li\u003e \u003cli\u003eRear: 0.7 in\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606771986773,"sku":"E10-42-047-05-22","price":381.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-pro-kit_a82e16f9-b051-4508-8a95-17461fd616ed.webp?v=1787172739"},{"product_id":"eibach-sportline-kit-for-hyundai-veloster-turbo-e20-42-047-01-22","title":"Eibach SPORTLINE KIT for HYUNDAI Veloster Turbo (E20-42-047-01-22)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eExtreme Performance Meets Extreme Style.\u003c\/li\u003e \u003cli\u003eRace-Car Like Handling.\u003c\/li\u003e \u003cli\u003eLower Center of Gravity.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster and get Better MPG!\u003c\/li\u003e \u003cli\u003eFront: 1.4 in\u003c\/li\u003e \u003cli\u003eRear: 1.3 in\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606779588949,"sku":"E20-42-047-01-22","price":381.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e20420470122-veloster-1.webp?v=1787172795"},{"product_id":"eibach-sportline-kit-for-hyundai-veloster-turbo-r-spec-e20-42-047-01-22","title":"Eibach SPORTLINE KIT for HYUNDAI Veloster Turbo R-Spec (E20-42-047-01-22)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003eExtreme Performance Meets Extreme Style.\u003c\/li\u003e \u003cli\u003eRace-Car Like Handling.\u003c\/li\u003e \u003cli\u003eLower Center of Gravity.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster and get Better MPG!\u003c\/li\u003e \u003cli\u003eFront: 1.2 in\u003c\/li\u003e \u003cli\u003eRear: 1.1 in\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606779621717,"sku":"E20-42-047-01-22","price":381.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e20420470122-veloster-1_30bc215f-b56a-43ba-8836-2609adb8fc67.webp?v=1787172796"},{"product_id":"eibach-anti-roll-bar-kit-rear-only-for-hyundai-veloster-turbo-16l-turbo-e40-42-027-01-01","title":"Eibach ANTI-ROLL BAR KIT (REAR ONLY) for HYUNDAI Veloster Turbo 1.6L Turbo (E40-42-027-01-01)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePrecision-Tuned for Balance and Control:\u003c\/li\u003e \u003cli\u003eIncreased Vehicle Stability:\u003c\/li\u003e \u003cli\u003eCompatible with OEM and Performance Setups:\u003c\/li\u003e \u003cli\u003eEngineered and Tested for Each Vehicle Application:\u003c\/li\u003e \u003cli\u003eMade by Eibach in the USA\u003c\/li\u003e \u003cli\u003eRear: 20mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606860820821,"sku":"E40-42-027-01-01","price":259.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e40420270101-veloster-1_74ab4576-a3b6-407c-aefe-fecabc7ebea8.webp?v=1787173122"},{"product_id":"eibach-anti-roll-bar-kit-rear-only-for-hyundai-veloster-turbo-e40-42-046-01-01","title":"Eibach ANTI-ROLL BAR KIT (REAR ONLY) for HYUNDAI Veloster Turbo (E40-42-046-01-01)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePrecision-Tuned for Balance and Control:\u003c\/li\u003e \u003cli\u003eIncreased Vehicle Stability:\u003c\/li\u003e \u003cli\u003eCompatible with OEM and Performance Setups:\u003c\/li\u003e \u003cli\u003eEngineered and Tested for Each Vehicle Application:\u003c\/li\u003e \u003cli\u003eMade by Eibach in the USA\u003c\/li\u003e \u003cli\u003eRear: 22mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606860886357,"sku":"E40-42-046-01-01","price":259.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e40420460101-veloster-1.webp?v=1787173122"},{"product_id":"eibach-anti-roll-bar-kit-rear-only-for-hyundai-veloster-turbo-r-spec-e40-42-046-01-01","title":"Eibach ANTI-ROLL BAR KIT (REAR ONLY) for HYUNDAI Veloster Turbo R-Spec (E40-42-046-01-01)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePrecision-Tuned for Balance and Control:\u003c\/li\u003e \u003cli\u003eIncreased Vehicle Stability:\u003c\/li\u003e \u003cli\u003eCompatible with OEM and Performance Setups:\u003c\/li\u003e \u003cli\u003eEngineered and Tested for Each Vehicle Application:\u003c\/li\u003e \u003cli\u003eMade by Eibach in the USA\u003c\/li\u003e \u003cli\u003eRear: 22mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606861017429,"sku":"E40-42-046-01-01","price":259.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e40420460101-veloster-1_a83952c8-04bd-4ec2-806b-f889f84c6f6a.webp?v=1787173121"},{"product_id":"eibach-anti-roll-bar-kit-rear-only-for-hyundai-veloster-n-e40-42-046-01-01","title":"Eibach ANTI-ROLL BAR KIT (REAR ONLY) for HYUNDAI Veloster N (E40-42-046-01-01)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePrecision-Tuned for Balance and Control:\u003c\/li\u003e \u003cli\u003eIncreased Vehicle Stability:\u003c\/li\u003e \u003cli\u003eCompatible with OEM and Performance Setups:\u003c\/li\u003e \u003cli\u003eEngineered and Tested for Each Vehicle Application:\u003c\/li\u003e \u003cli\u003eMade by Eibach in the USA\u003c\/li\u003e \u003cli\u003eRear: 22mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606861082965,"sku":"E40-42-046-01-01","price":259.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e40420460101-veloster-1_6937bbc3-aaab-43c3-8fd1-607f997cebcb.webp?v=1787173120"},{"product_id":"eibach-anti-roll-bar-kit-front-only-for-hyundai-veloster-turbo-e40-42-046-01-10","title":"Eibach ANTI-ROLL BAR KIT (FRONT ONLY) for HYUNDAI Veloster Turbo (E40-42-046-01-10)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePrecision-Tuned for Balance and Control:\u003c\/li\u003e \u003cli\u003eIncreased Vehicle Stability:\u003c\/li\u003e \u003cli\u003eCompatible with OEM and Performance Setups:\u003c\/li\u003e \u003cli\u003eEngineered and Tested for Each Vehicle Application:\u003c\/li\u003e \u003cli\u003eMade by Eibach in the USA\u003c\/li\u003e \u003cli\u003eFront: 27mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606861115733,"sku":"E40-42-046-01-10","price":288.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e40420460110-veloster-1.webp?v=1787173120"},{"product_id":"eibach-anti-roll-bar-kit-front-only-for-hyundai-veloster-turbo-r-spec-e40-42-046-01-10","title":"Eibach ANTI-ROLL BAR KIT (FRONT ONLY) for HYUNDAI Veloster Turbo R-Spec (E40-42-046-01-10)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePrecision-Tuned for Balance and Control:\u003c\/li\u003e \u003cli\u003eIncreased Vehicle Stability:\u003c\/li\u003e \u003cli\u003eCompatible with OEM and Performance Setups:\u003c\/li\u003e \u003cli\u003eEngineered and Tested for Each Vehicle Application:\u003c\/li\u003e \u003cli\u003eMade by Eibach in the USA\u003c\/li\u003e \u003cli\u003eFront: 27mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606861214037,"sku":"E40-42-046-01-10","price":288.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e40420460110-veloster-1_b63728c3-8050-48d5-9a24-0e7a5aa4be7e.webp?v=1787173124"},{"product_id":"eibach-anti-roll-bar-kit-frontrear-for-hyundai-veloster-turbo-e40-42-046-01-11","title":"Eibach ANTI-ROLL BAR KIT (FRONT\u0026REAR) for HYUNDAI Veloster Turbo (E40-42-046-01-11)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePrecision-Tuned for Balance and Control:\u003c\/li\u003e \u003cli\u003eIncreased Vehicle Stability:\u003c\/li\u003e \u003cli\u003eCompatible with OEM and Performance Setups:\u003c\/li\u003e \u003cli\u003eEngineered and Tested for Each Vehicle Application:\u003c\/li\u003e \u003cli\u003eMade by Eibach in the USA\u003c\/li\u003e \u003cli\u003eFront: 27mm\u003c\/li\u003e \u003cli\u003eRear: 22mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606861541717,"sku":"E40-42-046-01-11","price":548.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e40420460111-veloster-1.webp?v=1787173126"},{"product_id":"eibach-anti-roll-bar-kit-frontrear-for-hyundai-veloster-turbo-r-spec-e40-42-046-01-11","title":"Eibach ANTI-ROLL BAR KIT (FRONT\u0026REAR) for HYUNDAI Veloster Turbo R-Spec (E40-42-046-01-11)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePrecision-Tuned for Balance and Control:\u003c\/li\u003e \u003cli\u003eIncreased Vehicle Stability:\u003c\/li\u003e \u003cli\u003eCompatible with OEM and Performance Setups:\u003c\/li\u003e \u003cli\u003eEngineered and Tested for Each Vehicle Application:\u003c\/li\u003e \u003cli\u003eMade by Eibach in the USA\u003c\/li\u003e \u003cli\u003eFront: 27mm\u003c\/li\u003e \u003cli\u003eRear: 22mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606861607253,"sku":"E40-42-046-01-11","price":548.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e40420460111-veloster-1_62d2026d-edc3-4954-9d4f-89af5bf5947b.webp?v=1787173126"},{"product_id":"eibach-pro-plus-kit-for-hyundai-veloster-turbo-16l-turbo-e43-42-027-01-22","title":"Eibach PRO-PLUS KIT for HYUNDAI Veloster Turbo 1.6L Turbo (E43-42-027-01-22)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePRO-KIT + ANTI-ROLL-KIT = PRO-PLUS.\u003c\/li\u003e \u003cli\u003ePerformance Springs and Sway Bars = Superior Handling for the Serious Enthusiast.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster and Better MPG!\u003c\/li\u003e \u003cli\u003eSimple Bolt-On, No Modifications: Install, Set the Alignment and Carve.\u003c\/li\u003e \u003cli\u003eFront: 1.7 in\u003c\/li\u003e \u003cli\u003eRear: 1.5 in\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606875337045,"sku":"E43-42-027-01-22","price":930.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-pro-plus_832b4561-f2ea-4492-85ad-024d10501eb9.webp?v=1787173197"},{"product_id":"eibach-pro-plus-kit-for-hyundai-veloster-turbo-e43-42-047-01-22","title":"Eibach PRO-PLUS KIT for HYUNDAI Veloster Turbo (E43-42-047-01-22)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePRO-KIT + ANTI-ROLL-KIT = PRO-PLUS.\u003c\/li\u003e \u003cli\u003ePerformance Springs and Sway Bars = Superior Handling for the Serious Enthusiast.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster and Better MPG!\u003c\/li\u003e \u003cli\u003eSimple Bolt-On, No Modifications: Install, Set the Alignment and Carve.\u003c\/li\u003e \u003cli\u003eFront: 1.0 in\u003c\/li\u003e \u003cli\u003eRear: 1.0 in\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606875664725,"sku":"E43-42-047-01-22","price":930.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e43420470122-veloster-1.webp?v=1787173202"},{"product_id":"eibach-pro-plus-kit-for-hyundai-veloster-turbo-r-spec-e43-42-047-01-22","title":"Eibach PRO-PLUS KIT for HYUNDAI Veloster Turbo R-Spec (E43-42-047-01-22)","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e \u003cli\u003ePRO-KIT + ANTI-ROLL-KIT = PRO-PLUS.\u003c\/li\u003e \u003cli\u003ePerformance Springs and Sway Bars = Superior Handling for the Serious Enthusiast.\u003c\/li\u003e \u003cli\u003eStop Quicker, Corner Faster and Better MPG!\u003c\/li\u003e \u003cli\u003eSimple Bolt-On, No Modifications: Install, Set the Alignment and Carve.\u003c\/li\u003e \u003cli\u003eFront: 0.8 in\u003c\/li\u003e \u003cli\u003eRear: 0.8 in\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52606875730261,"sku":"E43-42-047-01-22","price":930.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-e43420470122-veloster-1_a1f435e8-76d9-4563-a6f4-47adc8ee1cb1.webp?v=1787173202"},{"product_id":"eibach-pro-kit-for-hyundai-veloster-fs-16-gdi-0311-1217-e10-42-027-01-22","title":"Eibach Pro-Kit for HYUNDAI VELOSTER (FS) 1.6 GDI 03.11 - 12.17 (E10-42-027-01-22)","description":"\u003cp\u003eThe Eibach Pro-Kit is an effective solution to enhance the driving dynamics of your production vehicle. Lowering your car with our springs not only improves its sporty and comfortable driving feel but also highlights it visually.\u003c\/p\u003e \u003cp\u003eEnjoy a noticeably enhanced driving experience and improved handling thanks to reduced body roll during acceleration, minimized cornering lean, and decreased nosedive under braking.\u003c\/p\u003e \u003cp\u003eWhile the Eibach Pro-Kit makes your car sportier and more comfortable, safety and ride quality remain our top priorities. That’s why our suspension engineers and experts develop these springs to meet the highest safety standards. The Pro-Kit lowering springs are perfectly tuned to your stock dampers, ensuring compatibility with electronic damper adjustment systems.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Kit-Fahrwerksfedern-768x432.webp?v=1771917366\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-KIT-EN-2048x738_7a078f4b-27d8-42e4-8eb7-433dcf8cb608.webp?v=1771916922\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003eStock\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/stock-wheel-graphic-768x226.webp?v=1771917133\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eThe OEM’s design their suspension to appeal to the masses. They leave lots of room for improvements in handling, responsiveness and “get-rid-of-the-fender-gap” appearance that every enthusiast wants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003ePro-kit\u003c\/h1\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/prokit-wheel-graphic-768x226_07480690-5977-410d-b67f-ec4668b2b8a2.webp?v=1771917225\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will instantly notice the significant improvement in handling, braking and responsiveness. At the same time, PRO-KIT retains the same comfort level as stock.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,20\u003c\/li\u003e\u003cli\u003eAxle-Load Front: 930 kg\u003c\/li\u003e\u003cli\u003eAxle-Load Rear: 840 kg\u003c\/li\u003e\u003cli\u003eLowering Front Approx.: 25 mm\u003c\/li\u003e\u003cli\u003eLowering Rear Approx.: 20 mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624698802517,"sku":"E10-42-027-01-22","price":245.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_c78221dd-88d4-450e-8b17-a2f007491a97.webp?v=1771907146"},{"product_id":"eibach-pro-kit-for-hyundai-veloster-fs-16-t-gdi-1012-1217-e10-42-027-02-22","title":"Eibach Pro-Kit for HYUNDAI VELOSTER (FS) 1.6 T-GDI 10.12 - 12.17 (E10-42-027-02-22)","description":"\u003cp\u003eThe Eibach Pro-Kit is an effective solution to enhance the driving dynamics of your production vehicle. Lowering your car with our springs not only improves its sporty and comfortable driving feel but also highlights it visually.\u003c\/p\u003e \u003cp\u003eEnjoy a noticeably enhanced driving experience and improved handling thanks to reduced body roll during acceleration, minimized cornering lean, and decreased nosedive under braking.\u003c\/p\u003e \u003cp\u003eWhile the Eibach Pro-Kit makes your car sportier and more comfortable, safety and ride quality remain our top priorities. That’s why our suspension engineers and experts develop these springs to meet the highest safety standards. The Pro-Kit lowering springs are perfectly tuned to your stock dampers, ensuring compatibility with electronic damper adjustment systems.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Kit-Fahrwerksfedern-768x432.webp?v=1771917366\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-KIT-EN-2048x738_7a078f4b-27d8-42e4-8eb7-433dcf8cb608.webp?v=1771916922\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003eStock\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/stock-wheel-graphic-768x226.webp?v=1771917133\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eThe OEM’s design their suspension to appeal to the masses. They leave lots of room for improvements in handling, responsiveness and “get-rid-of-the-fender-gap” appearance that every enthusiast wants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003ePro-kit\u003c\/h1\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/prokit-wheel-graphic-768x226_07480690-5977-410d-b67f-ec4668b2b8a2.webp?v=1771917225\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will instantly notice the significant improvement in handling, braking and responsiveness. At the same time, PRO-KIT retains the same comfort level as stock.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,20\u003c\/li\u003e\u003cli\u003eAxle-Load Front: 960 kg\u003c\/li\u003e\u003cli\u003eAxle-Load Rear: 840 kg\u003c\/li\u003e\u003cli\u003eLowering Front Approx.: 30 mm\u003c\/li\u003e\u003cli\u003eLowering Rear Approx.: 20 mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624698835285,"sku":"E10-42-027-02-22","price":245.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_5d3f7bc3-8a5f-44da-ae7e-21bfa42b0fac.webp?v=1771907148"},{"product_id":"wagner-tuning-hyundai-veloster-n-dct-facelift-competition-gen2-intercooler-kit","title":"Wagner Tuning Hyundai Veloster N DCT Facelift Competition Gen.2 Intercooler Kit","description":"\u003cdiv class=\"tab_content tab_1 active\"\u003e\n\u003cb\u003eWagner Tuning Competition Intercooler for Hyundai Veloster N – 101.4% more volume \u0026amp; upgrade kit\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003ci\u003e\u003cb\u003e\u003cspan color=\"#FF0000\"\u003ewith parts certificate\u003c\/span\u003e\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003eDiscover the full performance potential of your Hyundai Veloster N! Take your vehicle's performance to a whole new level with the impressive Wagner Tuning high-performance intercooler. This upgrade is the ideal solution for dramatically improving cooling performance and achieving a massive increase in power. Experience an extraordinary driving experience – legally and with parts certification.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhy this intercooler is the best choice for your Veloster N:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eMassive increase in power thanks to 101.4% more volume:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWith impressive dimensions of 580 mm x 150 mm x 135.4 mm + 580 mm x 62 mm x 70 mm (stepped mesh), our high-performance mesh offers a sensational volume of 14.3 liters. That's an incredible 101.4% increase compared to the standard cooler (7.1 liters) . The result: significantly more cool, dense air for your engine and a noticeable increase in performance.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eImproved cooling performance \u0026amp; 44.3% larger flow area:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe 44.3% larger flow area (1144.92 cm²) in combination with the stepped mesh ensures maximum heat transfer. The high-quality cast aluminium end boxes have been optimised using CAD technology and CFD simulations to ensure minimal back pressure and ideal airflow.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOptimized design and durability:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe innovative competition mesh (tube fin) and a special air baffle ensure ideal airflow, even to adjacent components. Weighing only 9.3 kg, the intercooler is particularly light. A high-quality anti-corrosion coating protects the cooler from environmental influences and guarantees a lasting cooling effect.\u003cbr\u003e\u003cbr\u003e\u003cspan color=\"#FF0000\"\u003e\u003cb\u003e100% legal with parts certificate:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThis kit comes with a parts certificate, so you can register it without hesitation. This ensures a safe and legal performance increase.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch2\u003eTechnical details \u0026amp; vehicle compatibility:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cb\u003eWagner Tuning intercooler:\u003c\/b\u003e\u003cbr\u003eNet dimensions: 580 mm x 150 mm x 135.4 mm + 580 mm x 62 mm x 70 mm (stepped)\u003cbr\u003eNet volume: 14.3 liters (+101.4% vs. OEM 7.1 L)\u003cbr\u003eFlow area: 1144.92 cm² (+44.3% vs. OEM 793.6 cm²)\u003cbr\u003eWeight: 9.3 kg\u003cbr\u003eInstallation: 100% plug-and-play\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHyundai Veloster N DCT 202 kW\/275 hp (from 2021)\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart number: 200001195\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eKit comes with:\u003c\/b\u003e\u003cbr\u003e1x intercooler\u003cbr\u003e2x silicone hoses\u003cbr\u003e1x air baffle\u003cbr\u003e1x mounting material\u003cbr\u003e\u003cb\u003e1x parts certificate\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e+ installation instructions\u003cbr\u003e\u003ciframe data-dashlane-frameid=\"1449\" data-dashlane-classification=\"other\" data-dashlane-rid=\"db76903e11649f39\" title=\"YouTube\" src=\"https:\/\/www.youtube.com\/embed\/Eb7mcOk6PeQ\" height=\"315\" width=\"560\" class=\"responsive\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"100%\" src=\"https:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001129-Temp.jpg\"\u003e\u003cbr\u003e\u003cimg width=\"100%\" src=\"https:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001129-Flow.jpg\"\u003e\u003c\/p\u003e","brand":"Wagner Tuning","offers":[{"title":"Default Title","offer_id":53536049070421,"sku":"200001195","price":799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_19d6c943-d5f4-45ad-8fd9-7e29a8d8433c.webp?v=1774337868"},{"product_id":"wagner-tuning-hyundai-veloster-n-competition-gen2-intercooler-kit","title":"Wagner Tuning Hyundai Veloster N Competition Gen.2 Intercooler Kit","description":"\u003cp\u003e\u003cb\u003eWagner Tuning Competition Intercooler for Hyundai Veloster N – 101% more volume \u0026amp; plug-and-play\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eExperience a groundbreaking performance boost for your Hyundai Veloster N! Unleash your vehicle's full potential with the Wagner Tuning Competition high-performance intercooler. This upgrade has been specially developed for the demanding requirements of the Veloster N and is the ideal solution for dramatically improving cooling performance, minimizing back pressure, and achieving a massive increase in performance. Take the performance of your Veloster N to a new level!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhy this intercooler is the best choice for your Hyundai:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eMassive performance increase thanks to 101% more volume:\u003c\/b\u003e\u003cspan\u003e With impressive Core dimensions of 580 mm x 150 mm x 135.4 mm and a total volume of 14.3 liters, this intercooler offers a sensational 44.3% larger flow area and a massive 101.4% more charge air volume compared to the standard cooler. The result: significantly more cool, dense air for your engine.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eOptimal airflow \u0026amp; minimal back pressure:\u003c\/b\u003e\u003cspan\u003e At the heart of the system is our high-quality competition high-performance Intercooler corer (tube fin). The cast aluminium end boxes have been optimised using CAD technology and CFD simulations to ensure ideal internal airflow. In addition, a specially designed air baffle ensures even filling. The result is outstanding cooling properties and minimal back pressure.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eImproved efficiency and durability:\u003c\/b\u003e\u003cspan\u003e Weighing only 9.3 kg, the intercooler is particularly light. A special anti-corrosion coating with excellent thermal conductivity properties guarantees a lasting and effective cooling effect even under extreme conditions. The cooler has also been tested up to 6 bar and is absolutely pressure-stable.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eSimple plug-and-play installation:\u003c\/b\u003e\u003cspan\u003e Installation is effortless at the original mounting points and, thanks to the plug-and-play principle, is a simple replacement that requires no costly modifications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical details \u0026amp; vehicle compatibility:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eWagner Tuning intercooler:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eDimensions: 580 mm x 150 mm x 135.4 mm + 580 mm x 62 mm x 70 mm (stepped)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFlow area: 114,492 mm² (+44.3% vs. OEM 79,360 mm²)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCore volume: 14.3 liters (+101.4% vs. OEM 7.1 L)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eInlet\/outlet: Ø65 mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 9.3 kg\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eInstallation: 100% plug-and-play\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHyundai Veloster N (184 kW\/250 hp) 2018-2020\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHyundai Veloster N Performance (202 kW\/275 hp) 2018-2020\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart number: 200001172\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eKit comes with:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1x intercooler\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x silicone hoses\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x mounting material\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x installation instructions\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg width=\"100%\" src=\"https:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001129-Temp.jpg\"\u003e\u003cbr\u003e\u003cimg width=\"100%\" src=\"https:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001129-Flow.jpg\"\u003e\u003c\/p\u003e","brand":"Wagner Tuning","offers":[{"title":"Default Title","offer_id":53536049529173,"sku":"200001172","price":799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_fe76035c-770a-4e97-b0ae-bee9b01bf137.webp?v=1774337891"},{"product_id":"whiteline-performance-control-arm-lower-inner-rear-bushing-kit-for-hyundai-veloster-turbo-2016-kca437","title":"Whiteline Performance Control Arm Lower - Inner Rear Bushing Kit for Hyundai Veloster Turbo (2016) (KCA437)","description":"\u003cp\u003eWhiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Whiteline Performance","offers":[{"title":"Default Title","offer_id":53698912223573,"sku":"KCA437","price":108.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/KCA437_ab3993ff-28c8-47cb-9d45-6c439aed6e12.webp?v=1787176630"},{"product_id":"whiteline-performance-control-arm-lower-inner-rear-bushing-kit-for-hyundai-veloster-turbo-2017-kca437","title":"Whiteline Performance Control Arm Lower - Inner Rear Bushing Kit for Hyundai Veloster Turbo (2017) (KCA437)","description":"\u003cp\u003eWhiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Whiteline Performance","offers":[{"title":"Default Title","offer_id":53698912289109,"sku":"KCA437","price":108.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/KCA437_ad76c330-1853-4368-9a0d-24e6bcf1a2a1.webp?v=1787176649"}],"url":"https:\/\/shop.regalautosport.com\/collections\/hyundai-veloster.oembed","provider":"Regal Autosport","version":"1.0","type":"link"}