{"title":"Porsche Cayenne 9YA Turbo S","description":null,"products":[{"product_id":"eventuri-porsche-cayenne-2020-gts-2019-turbo-s-4-0-tfsi-intake","title":"Eventuri Porsche Cayenne 2020+ GTS, 2019+ Turbo S 4.0 TFSI Intake","description":"\u003cp\u003e\u003cstrong\u003ePerformance Gain Stock Map: 14-20hp, 17-21ft-lb\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePerformance Gain Stage 1 Map*: 25-28hp, 20-23ft-lb\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitment: 2020+ RSQ8\/SQ7\/SQ8, 2019+ Urus, 2020+ Cayenne Turbo, 2019+ Bentayga\u003c\/p\u003e\n\u003cp\u003eOur 4.0TFSI V8 EA825 intake is a ground-up redesign and optimisation of the entire air inlet track. Every component including the lid has been developed to allow the V8 twin turbos to pull in air with less drag resulting in industry leading performance gains. The stock airbox lid itself creates a restriction on the size of the flow collector which feeds the inlets from the filters. So we increased the height of the central section of the lid to allow for a larger flow collector and larger cone filters to be used. This removes the inherent restriction and sets our intake apart from the rest of the field who by utilising the stock lid must also use a restricted collector and filtration media. The turbo inlets are up to 43% larger in cross sectional area than stock and are designed with an advanced dimpled inner surface to reduce frictional losses between the flow and the wall boundary. By allowing a “cushion” of air at the wall surface, airflow is able to move through the inlets at higher flow rates with reduced pressure loss. This allows the turbos to draw air with less resistance and therefore reduce the wastegate duty cycle resulting in higher overall performance.\u003c\/p\u003e\n\u003cp\u003e*Gains measured can vary with different ECU tunes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDyno Testing\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis intake has been independently dyno tested by Eurocharged Canada. Tests were done back to back against the stock airbox and several runs were taken with each configuration. The dyno results show a consistent gain throughout the RPM range which can be attributed to the turbos reaching peak boost earlier and with a lower wastegate duty cycle due to the higher efficiency of the intake system. The first graph shows the results on a completely stock vehicle with only the intake being changed between runs. The second graph shows an RSQ8 which had a stage 1 tune and drop in filter as the baseline run. Then the intake was changed leaving the tune as it was. The performance gains on both vehicles translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52706918980_0ce865cd31_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52706756264_2756bf4482_b.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEVE-4V8TT-CF-INT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e: 2020+ RSQ8\/SQ8\/SQ7, 2019+ Urus, 2020+ Cayenne Turbo, 2019+ Bentayga\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52718143469_2c382a8694_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Eventuri 4.0TFSI V8 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEach intake system consists of:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnlarged Carbon Fiber AIrbox Lid\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Flow Collector\u003c\/li\u003e\n\u003cli\u003e2 Thermoplastic Turbo Inlets with Dimpled Inner Surface\u003c\/li\u003e\n\u003cli\u003e2 x Bespoke High Flow Dry Cone Filters\u003c\/li\u003e\n\u003cli\u003eCustom Flexible Hoses\u003c\/li\u003e\n\u003cli\u003eCNC Machined Breather Ports and Reinforcement Rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52718302925_af7e963ac3_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003ciframe width=\"1024\" height=\"819\" src=\"https:\/\/imgflip.com\/embed\/8b39h7\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eENLARGED AIRBOX LID\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52668573254_8c8c38ae02_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe first constraint we had to overcome in order to dramatically increase the overall volume of the intake was the airbox lid. The stock lid leaves a shallow opening for the flow collector and also restricts the filtration medium being used. By creating a raised portion in the middle of the lid we are able to create more space for a larger flow collector and also for larger filters. The lid is made from prepreg carbon fibre and uses the same mounting points as the stock lid.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52719738339_b6922d9ff7_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCARBON FLOW COLLECTOR \u0026amp; FILTERS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52667788592_60974fd92c_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eDirecting the airflow from the filters to the turbo inlets is the flow collector. The stock one is constricted in size due to eth stock kid but having removed that restriction, we were able to dramatically increase the volume of our version. In addition, this also gave us the freedom to replace the stock filter with higher flowing cone filters which also have a larger total surface area.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52718363463_ea8ba9bc2f_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTURBO INLETS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52668572844_8d669210bd_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe biggest restriction in the stock system are the turbo inlets. The stock inlets not only are small in size but they also have 2 flexible sections. The flexible section immediately in front of the turbo creates turbulence as the engine moves under acceleration. To combat this, the stock inlets also have flow guides at the exit of the inlets but these also create a restriction. We removed the first flexible section which also meant that we could increase the internal volume. By increasing the inlet sizes, the turbos are able to pull in air with less restriction hence allowing for a quicker spool. In the following photos you can see the differences in the sizes.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52719418414_0c0aae7066_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eWe could have finalised the designs here however, we wanted to push the boundaries further and introduce a novel dimpled pattern to the inside surfaces. In theory, small dimples can increase the flow rate by reducing the frictional pressure losses through a tube. We have explained this in detail in our video for the G80 M3 intake which can be found\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/youtu.be\/rHXB4ljWHf4\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52668573299_683563f71a_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eA lot of R\u0026amp;D went into simulating different sizes and shapes until we settled on an optimised version which demonstrated a higher flow rate through the inlets in comparison with a smooth surface. Applying such an intricate was only possible due to the advanced manufacturing technique we employed to make the inlets, where traditional methods would not have given the accuracy required. The dimples create an \"air cushion\" affect over the surface of the inlet which then allows the main body of air to \"slip\" with less friction through the body into the turbo. This results in a more even velocity profile in a dimpled tube with the net affect being a higher velocity for the same boundary conditions. Here are the CFD simulations showing the re-circulations in the dimples and the higher velocity in the dimpled tube. Further reading can be done from these scientific papers:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1757-899X\/568\/1\/012050\"\u003eFlow studies on increasing the efficiency of the inlet manifold\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.researchgate.net\/publication\/331806841_Hydrodynamics_of_laminar_flow_through_dimpled_pipes\"\u003eHydrodynamics of laminar flow through dimpled pipes\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51946223098_ff5f4de3fd_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe complete system comes together to provide an intake which improves on the stock airbox in performance, aesthetics and sound.........\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52671685094_1bea1d98ce_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52671387841_1e4d462f01_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52671893558_e3dd3321e9_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52671686504_afc0b7b42e_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52671827235_cea005098d_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":49376145146197,"sku":"EVE-4V8TT-CF-INT","price":2380.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/52668285036_b2dd44dfc4_k.jpg?v=1724947939"},{"product_id":"eventuri-intake-for-cayenne-2025-turbo-s-gts-gt-4-0-tfsi","title":"Eventuri Intake for Cayenne 2025+ Turbo S, GTS, GT 4.0 TFSI","description":"\u003ch4\u003ePorsche Cayenne Turbo Facelift\u003c\/h4\u003e\n\u003cp\u003eFitment: 2025+ Cayenne Turbo S, GT, GTS\u003c\/p\u003e\n\u003cp\u003eOur 4.0TFSI V8 EA825 intake has now been updated to fit the 2025 facelift Cayenne Turbo variants. Every component including the lid has been developed to allow the V8 twin turbos to pull in air with less drag resulting in noticeable improvements to the power delivery. The stock airbox lid itself creates a restriction on the size of the flow collector which feeds the inlets from the filters. So we increased the height of the central section of the lid to allow for a larger flow collector and larger cone filters to be used. This removes the inherent restriction and sets our intake apart from the rest of the field who by utilising the stock lid must also use a restricted collector and filtration media. The turbo inlets are up to 43% larger in cross sectional area than stock and are designed for maximum volume. The extra volume enables the turbos to respond faster resulting in a noticeable improvement in throttle response.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eThe Eventuri 4.0TFSI V8 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEach intake system consists of:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnlarged Carbon Fiber Airbox Lid\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Flow Collector\u003c\/li\u003e\n\u003cli\u003e2 x Custom EPDM Inlet Hoses\u003c\/li\u003e\n\u003cli\u003e2 x Bespoke High Flow Dry Cone Filters\u003c\/li\u003e\n\u003cli\u003eCNC Machined Reinforcement Rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/54686471407_6a14baac8c_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eENLARGED AIRBOX LID\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52668573254_8c8c38ae02_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe first constraint we had to overcome in order to dramatically increase the overall volume of the intake was the airbox lid. The stock lid leaves a shallow opening for the flow collector and also restricts the filtration medium being used. By creating a raised portion in the middle of the lid we are able to create more space for a larger flow collector and also for larger filters. The lid is made from prepreg carbon fibre and uses the same mounting points as the stock lid.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52719738339_b6922d9ff7_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCARBON FLOW COLLECTOR \u0026amp; FILTERS\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52667788592_60974fd92c_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDirecting the airflow from the filters to the turbo inlets is the flow collector. The stock one is constricted in size due to the stock lid but having removed that restriction, we were able to dramatically increase the volume of our version. In addition, this also gave us the freedom to replace the stock filter with higher flowing cone filters which also have a larger total surface area.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/52718363463_ea8ba9bc2f_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTURBO INLETS\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/54657757018_10c69784f8_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe biggest restriction in the stock system are the turbo inlets. The stock inlets maintain a small cross sectional area from the turbos all the way to the airbox. We have redesigned the inlets to increase in size immediately after the turbos. This creates a larger volume of captured air which the turbos can use with minimal drag and this results in an improved throttle response. The new inlets also allow for engine movement without causing turbulent flow.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/54656693932_c2d09bd0cd_b.jpg\" alt=\"\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe complete system comes together to provide an intake which improves on the stock airbox in performance, aesthetics and sound.........\u003c\/span\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":51218443010389,"sku":"EVE-FLV8TT-CF-INT","price":2380.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Cayenne-FL.jpg?v=1754303221"},{"product_id":"powerflex-jack-pad-adaptor-for-porsche-cayenne-models-e3-9y-2018-on","title":"Powerflex Jack Pad Adaptor for Porsche Cayenne Models E3 9Y (2018 - ON)","description":"\u003cp\u003eMade from Black 95A durometer PU for durability and designed to fit into the original rectangular plastic lifting point, these handy workshop widgets help lift\/jacking stability and location while protecting the underside of your\/your customer's vehicle. To use, simply place our Jack Pad on your trolley jack, align it with the recess in the original plastic lifting point and lift the car correctly and securely. \u003c\/p\u003e\u003cp\u003eThese are sold as single units, please order the quantity required per car. e.g. If your car has two of these bushes, order 2\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":51664034726229,"sku":"PF3-1665","price":24.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_5d03437b-1fcc-47a3-83df-9fa68f41a61e.jpg?v=1760429974"},{"product_id":"powerflex-poweralign-wheel-mounting-guide-pin-for-porsche-cayenne-models-e3-9y-2018-on","title":"Powerflex PowerAlign Wheel Mounting Guide Pin for Porsche Cayenne Models E3 9Y (2018 - ON)","description":"\u003cp\u003eAvailable singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox. Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins use high-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printed protective sleeves for ease of identification and anodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market. Please click here to view all sizes available and for a wider-reaching application list in the form of a new user-friendly drop-down search function. \u003c\/p\u003e\u003cp\u003eThese are sold as single units, please order the quantity required per car. e.g. If your car has two of these bushes, order 2\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":51664139026773,"sku":"PF99-514-15","price":25.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_9e14919a-2e81-4332-b7a5-290b9e8bd60a.jpg?v=1760431119"},{"product_id":"powerflex-transmission-mount-insert-petrol-for-porsche-cayenne-models-e3-9y-2018-on","title":"Powerflex Transmission Mount Insert (Petrol) for Porsche Cayenne Models E3 9Y (2018 - ON)","description":"\u003cp\u003eA small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine\/transmission and chassis. \u003c\/p\u003e\u003cp\u003eThese are sold as single units, please order the quantity required per car. e.g. If your car has two of these bushes, order 2\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":51664254861653,"sku":"PFF3-726","price":25.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_020b16be-6dd5-4951-be22-c6ee22150787.jpg?v=1760432837"},{"product_id":"powerflex-transmission-mount-insert-track-for-porsche-cayenne-models-e3-9y-2018-on","title":"Powerflex Transmission Mount Insert (Track) for Porsche Cayenne Models E3 9Y (2018 - ON)","description":"\u003cp\u003eA small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine\/transmission and chassis. \u003c\/p\u003e\u003cp\u003eThese are sold as single units, please order the quantity required per car. e.g. If your car has two of these bushes, order 2\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":51664255484245,"sku":"PFF3-726BLK","price":28.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_263f96cc-0e85-47c9-8433-5df935631fda.jpg?v=1760432857"},{"product_id":"wagner-tuning-rsq8-urus-cayenne-intercooler-kit","title":"Wagner Tuning RSQ8 \/ Urus \/ Cayenne Intercooler Kit","description":"\u003cp\u003e\u003cb\u003eWagner Tuning Competition Intercooler for Audi RS Q8, Lamborghini Urus \u0026amp; Porsche Cayenne (V8 models)\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUnleash the full potential of your luxury SUV! With the revolutionary Wagner Tuning Competition Intercooler, you get the ultimate performance boost for an unparalleled driving experience. This upgrade is the ideal solution for dramatically improving cooling performance, minimizing back pressure, and achieving a massive increase in power. Experience the power you deserve.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhy this intercooler is the best choice for your V8 vehicle:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eMassive power increase thanks to 18.4 liters of charge air volume:\u003c\/b\u003e\u003cspan\u003e With impressive mesh dimensions of 2 x [270 mm x 296 mm x 115 mm], our intercooler offers a sensational volume of 18.4 liters. That's an increase of 65% compared to the standard cooler (11.4 liters). The result: a significant increase in performance and greater efficiency.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eOutstanding cooling performance \u0026amp; 50% more air flow:\u003c\/b\u003e\u003cspan\u003e The specially developed high-performance mesh ensures outstanding cooling properties. With +50% more air mass flow compared to the original and a 13% larger flow area (1600 cm² vs. OEM 1420 cm²), back pressure is minimized and the charge air is cooled much more efficiently.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eOptimized design and durability:\u003c\/b\u003e\u003cspan\u003e With a weight of only 9.0 kg per cooler, we set new standards in lightweight construction. The free-form end boxes made of high-quality cast aluminium, developed in CAD, guarantee optimal internal airflow and impressive pressure resistance of up to 6 bar. A high-quality anti-corrosion coating protects against environmental influences and guarantees a lasting, optimal cooling effect.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eSimple plug-and-play installation:\u003c\/b\u003e\u003cspan\u003e The ready-to-install kit allows for easy replacement of the standard intercooler. No complex modifications are required, so you can benefit from the impressive advantages as quickly as possible.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTechnical details \u0026amp; vehicle compatibility:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eWagner Tuning intercooler:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eDimensions: 2 x [270 mm x 296 mm x 115 mm]\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNet volume: 18.4 liters (+65% vs. OEM 11.4 L)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFlow area: 1600 cm² (+13% vs. OEM 1420 cm²)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWeight: 9.0 kg per cooler\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePressure resistance: up to 6 ba\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eInstallation: 100% plug-and-play\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSuitable for:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eAudi RS Q8 (4M) 441 kW\/600 hp (from 2019)\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eLamborghini Urus 478-490 kW\/650-666 hp (from 2018)\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePorsche Cayenne Turbo GT 471 kW\/640 hp (2019-2023)\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePorsche Cayenne Turbo 404 kW\/550 hp (2019-2023)\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePorsche Cayenne Turbo S E-Hybrid 500 kW\/680 hp (2019-2023)\u003c\/b\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003e\u003cspan color=\"#FF0000\"\u003e*Note: For certain models (Porsche Cayenne), adjustments to the original air ducting are necessary.\u003c\/span\u003e\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart number: 200001206\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eKit comes with:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e2x intercoolers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4x silicone hoses\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x aluminium pipes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x mounting hardware\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x installation instructions\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001206-Temp.jpg\" height=\"auto\" width=\"100%\" class=\"hoverZoomLink\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001206-Flow(EN).jpg\" height=\"auto\" width=\"100%\" class=\"hoverZoomLink\"\u003e\u003c\/p\u003e","brand":"Wagner Tuning","offers":[{"title":"Default Title","offer_id":53536048939349,"sku":"200001206","price":3509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_159c4b90-85cc-44b6-b978-ece94f7912c1.webp?v=1774337860"}],"url":"https:\/\/shop.regalautosport.com\/collections\/porsche-cayenne-9ya-turbo-s.oembed","provider":"Regal Autosport","version":"1.0","type":"link"}