{"title":"VW AM Golf Sportsvan","description":null,"products":[{"product_id":"eibach-anti-roll-kit-for-vw-golf-sportsvan-am1-an1-10-tsi-12-tsi-14-tsi-14-tsi-multi-fuel-15-tsi-16-16-tdi-20-tdi-0214-e40-15-021-01-11","title":"Eibach Anti-Roll-Kit for VW GOLF SPORTSVAN (AM1, AN1) 1.0 TSI, 1.2 TSI, 1.4 TSI, 1.4 TSI Multi-Fuel, 1.5 TSI, 1.6, 1.6 TDI, 2.0 TDI 02.14 - (E40-15-021-01-11)","description":"\u003cp\u003eOur anti-roll kit allows you to precisely fine-tune the vehicle's handling. Thanks to increased rigidity, our performance stabilizers reduce body roll, resulting in greater stability, improved road grip, and dynamic handling during sporty driving. Particularly when cornering, the stabilizer can influence the car's center of gravity, helping to return it to its ideal position.\u003c\/p\u003e \u003cp\u003eFor maximum performance, Eibach stabilizers are manufactured from cold-formed spring steel wire and finished with a durable powder coating.\u003c\/p\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Anti-Roll-Kit-Stabilisatoren-1024x576.webp?v=1770979490\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/ANTI-ROLL-KIT-EN-2048x738_b62f8c70-3461-4d4e-b05d-e3a71c2cb0f9.webp?v=1771043549\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003ch1\u003eBefore\u003c\/h1\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/ANTI-ROLL-KIT-before-illustration.webp?v=1771473659\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003eWhen cornering, your vehicle’s weight shifts to the outside of the turn. This puts more load on the outer chassis and reduce the inner side – causing unwanted body roll that can impact handling and performance.\u003cbr\u003e\u003cbr\u003e\u003ch1\u003eAfter\u003c\/h1\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/ANTI-ROLL-KIT-after-illustration.webp?v=1771473684\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003eOur high-performance anti-roll bars increase stiffness and significantly reduce body roll – delivering enhanced stability, improved grip, and a more dynamic driving experience, especially during spirited driving.\u003cbr\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,20,22,45,170\u003c\/li\u003e\u003cli\u003eFront Diameter: Ø 28 x 4 Rohr\u003c\/li\u003e\u003cli\u003eRear Diameter: Ø 25 x 4,7 Rohr\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624627073365,"sku":"E40-15-021-01-11","price":528.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_b640c5b2-a687-4f87-bf27-21a24a752200.webp?v=1771905253"},{"product_id":"eibach-pro-kit-for-vw-golf-sportsvan-am1-an1-10-tsi-12-tsi-14-tsi-14-tsi-multifuel-15-tsi-16-0214-e10-79-010-01-22","title":"Eibach Pro-Kit for VW GOLF SPORTSVAN (AM1, AN1) 1.0 TSI, 1.2 TSI, 1.4 TSI, 1.4 TSI MultiFuel, 1.5 TSI, 1.6 02.14 - (E10-79-010-01-22)","description":"\u003cp\u003eThe Eibach Pro-Kit is an effective solution to enhance the driving dynamics of your production vehicle. Lowering your car with our springs not only improves its sporty and comfortable driving feel but also highlights it visually.\u003c\/p\u003e \u003cp\u003eEnjoy a noticeably enhanced driving experience and improved handling thanks to reduced body roll during acceleration, minimized cornering lean, and decreased nosedive under braking.\u003c\/p\u003e \u003cp\u003eWhile the Eibach Pro-Kit makes your car sportier and more comfortable, safety and ride quality remain our top priorities. That’s why our suspension engineers and experts develop these springs to meet the highest safety standards. The Pro-Kit lowering springs are perfectly tuned to your stock dampers, ensuring compatibility with electronic damper adjustment systems.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Kit-Fahrwerksfedern-768x432.webp?v=1771917366\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-KIT-EN-2048x738_7a078f4b-27d8-42e4-8eb7-433dcf8cb608.webp?v=1771916922\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003eStock\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/stock-wheel-graphic-768x226.webp?v=1771917133\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eThe OEM’s design their suspension to appeal to the masses. They leave lots of room for improvements in handling, responsiveness and “get-rid-of-the-fender-gap” appearance that every enthusiast wants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003ePro-kit\u003c\/h1\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/prokit-wheel-graphic-768x226_07480690-5977-410d-b67f-ec4668b2b8a2.webp?v=1771917225\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will instantly notice the significant improvement in handling, braking and responsiveness. At the same time, PRO-KIT retains the same comfort level as stock.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,20,170\u003c\/li\u003e\u003cli\u003eAxle-Load Front: 985 kg\u003c\/li\u003e\u003cli\u003eAxle-Load Rear: 1150 kg\u003c\/li\u003e\u003cli\u003eLowering Front Approx.: 30-40 mm\u003c\/li\u003e\u003cli\u003eLowering Rear Approx.: 30 mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624815030613,"sku":"E10-79-010-01-22","price":230.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_139aa17c-a9d1-4110-bde9-bd1e6df3b89a.webp?v=1771909366"},{"product_id":"eibach-pro-kit-for-vw-golf-sportsvan-am1-an1-10-tsi-12-tsi-14-tsi-14-tsi-multifuel-15-tsi-16-0214-e10-79-010-03-22","title":"Eibach Pro-Kit for VW GOLF SPORTSVAN (AM1, AN1) 1.0 TSI, 1.2 TSI, 1.4 TSI, 1.4 TSI MultiFuel, 1.5 TSI, 1.6 02.14 - (E10-79-010-03-22)","description":"\u003cp\u003eThe Eibach Pro-Kit is an effective solution to enhance the driving dynamics of your production vehicle. Lowering your car with our springs not only improves its sporty and comfortable driving feel but also highlights it visually.\u003c\/p\u003e \u003cp\u003eEnjoy a noticeably enhanced driving experience and improved handling thanks to reduced body roll during acceleration, minimized cornering lean, and decreased nosedive under braking.\u003c\/p\u003e \u003cp\u003eWhile the Eibach Pro-Kit makes your car sportier and more comfortable, safety and ride quality remain our top priorities. That’s why our suspension engineers and experts develop these springs to meet the highest safety standards. The Pro-Kit lowering springs are perfectly tuned to your stock dampers, ensuring compatibility with electronic damper adjustment systems.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Kit-Fahrwerksfedern-768x432.webp?v=1771917366\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-KIT-EN-2048x738_7a078f4b-27d8-42e4-8eb7-433dcf8cb608.webp?v=1771916922\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003eStock\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/stock-wheel-graphic-768x226.webp?v=1771917133\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eThe OEM’s design their suspension to appeal to the masses. They leave lots of room for improvements in handling, responsiveness and “get-rid-of-the-fender-gap” appearance that every enthusiast wants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003ePro-kit\u003c\/h1\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/prokit-wheel-graphic-768x226_07480690-5977-410d-b67f-ec4668b2b8a2.webp?v=1771917225\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will instantly notice the significant improvement in handling, braking and responsiveness. At the same time, PRO-KIT retains the same comfort level as stock.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,20,171\u003c\/li\u003e\u003cli\u003eAxle-Load Front: 985 kg\u003c\/li\u003e\u003cli\u003eAxle-Load Rear: 1050 kg\u003c\/li\u003e\u003cli\u003eLowering Front Approx.: 30-40 mm\u003c\/li\u003e\u003cli\u003eLowering Rear Approx.: 30 mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624815063381,"sku":"E10-79-010-03-22","price":228.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_558def20-cff1-434b-bc3d-c77ef8dd5347.webp?v=1771909368"},{"product_id":"eibach-pro-kit-for-vw-golf-sportsvan-am1-an1-14-tsi-14-tsi-multi-fuel-16-16-tdi-20-tdi-0214-e10-79-010-02-22","title":"Eibach Pro-Kit for VW GOLF SPORTSVAN (AM1, AN1) 1.4 TSI, 1.4 TSI Multi-Fuel, 1.6, 1.6 TDI, 2.0 TDI 02.14 - (E10-79-010-02-22)","description":"\u003cp\u003eThe Eibach Pro-Kit is an effective solution to enhance the driving dynamics of your production vehicle. Lowering your car with our springs not only improves its sporty and comfortable driving feel but also highlights it visually.\u003c\/p\u003e \u003cp\u003eEnjoy a noticeably enhanced driving experience and improved handling thanks to reduced body roll during acceleration, minimized cornering lean, and decreased nosedive under braking.\u003c\/p\u003e \u003cp\u003eWhile the Eibach Pro-Kit makes your car sportier and more comfortable, safety and ride quality remain our top priorities. That’s why our suspension engineers and experts develop these springs to meet the highest safety standards. The Pro-Kit lowering springs are perfectly tuned to your stock dampers, ensuring compatibility with electronic damper adjustment systems.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Kit-Fahrwerksfedern-768x432.webp?v=1771917366\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-KIT-EN-2048x738_7a078f4b-27d8-42e4-8eb7-433dcf8cb608.webp?v=1771916922\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003eStock\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/stock-wheel-graphic-768x226.webp?v=1771917133\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eThe OEM’s design their suspension to appeal to the masses. They leave lots of room for improvements in handling, responsiveness and “get-rid-of-the-fender-gap” appearance that every enthusiast wants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003ePro-kit\u003c\/h1\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/prokit-wheel-graphic-768x226_07480690-5977-410d-b67f-ec4668b2b8a2.webp?v=1771917225\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will instantly notice the significant improvement in handling, braking and responsiveness. At the same time, PRO-KIT retains the same comfort level as stock.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,20,170\u003c\/li\u003e\u003cli\u003eAxle-Load Front: 1075 kg\u003c\/li\u003e\u003cli\u003eAxle-Load Rear: 1150 kg\u003c\/li\u003e\u003cli\u003eLowering Front Approx.: 30-40 mm\u003c\/li\u003e\u003cli\u003eLowering Rear Approx.: 30 mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624815194453,"sku":"E10-79-010-02-22","price":228.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_394091e8-4a46-4bf0-a6ea-49e147da763c.webp?v=1771909369"},{"product_id":"eibach-pro-kit-for-vw-golf-sportsvan-am1-an1-14-tsi-14-tsi-multi-fuel-16-16-tdi-20-tdi-0214-e10-79-010-04-22","title":"Eibach Pro-Kit for VW GOLF SPORTSVAN (AM1, AN1) 1.4 TSI, 1.4 TSI Multi-Fuel, 1.6, 1.6 TDI, 2.0 TDI 02.14 - (E10-79-010-04-22)","description":"\u003cp\u003eThe Eibach Pro-Kit is an effective solution to enhance the driving dynamics of your production vehicle. Lowering your car with our springs not only improves its sporty and comfortable driving feel but also highlights it visually.\u003c\/p\u003e \u003cp\u003eEnjoy a noticeably enhanced driving experience and improved handling thanks to reduced body roll during acceleration, minimized cornering lean, and decreased nosedive under braking.\u003c\/p\u003e \u003cp\u003eWhile the Eibach Pro-Kit makes your car sportier and more comfortable, safety and ride quality remain our top priorities. That’s why our suspension engineers and experts develop these springs to meet the highest safety standards. The Pro-Kit lowering springs are perfectly tuned to your stock dampers, ensuring compatibility with electronic damper adjustment systems.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Kit-Fahrwerksfedern-768x432.webp?v=1771917366\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-KIT-EN-2048x738_7a078f4b-27d8-42e4-8eb7-433dcf8cb608.webp?v=1771916922\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003eStock\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/stock-wheel-graphic-768x226.webp?v=1771917133\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eThe OEM’s design their suspension to appeal to the masses. They leave lots of room for improvements in handling, responsiveness and “get-rid-of-the-fender-gap” appearance that every enthusiast wants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003ePro-kit\u003c\/h1\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/prokit-wheel-graphic-768x226_07480690-5977-410d-b67f-ec4668b2b8a2.webp?v=1771917225\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will instantly notice the significant improvement in handling, braking and responsiveness. At the same time, PRO-KIT retains the same comfort level as stock.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,20,171\u003c\/li\u003e\u003cli\u003eAxle-Load Front: 1075 kg\u003c\/li\u003e\u003cli\u003eAxle-Load Rear: 1050 kg\u003c\/li\u003e\u003cli\u003eLowering Front Approx.: 30-40 mm\u003c\/li\u003e\u003cli\u003eLowering Rear Approx.: 30 mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624815227221,"sku":"E10-79-010-04-22","price":230.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/eibach-prokit-euro_fec0f159-ccbf-404a-acc6-6d1fbf67af59.webp?v=1787173966"},{"product_id":"eibach-pro-kit-for-vw-golf-sportsvan-am1-an1-20-tdi-0214-e10-85-041-02-22","title":"Eibach Pro-Kit for VW GOLF SPORTSVAN (AM1, AN1) 2.0 TDI 02.14 - (E10-85-041-02-22)","description":"\u003cp\u003eThe Eibach Pro-Kit is an effective solution to enhance the driving dynamics of your production vehicle. Lowering your car with our springs not only improves its sporty and comfortable driving feel but also highlights it visually.\u003c\/p\u003e \u003cp\u003eEnjoy a noticeably enhanced driving experience and improved handling thanks to reduced body roll during acceleration, minimized cornering lean, and decreased nosedive under braking.\u003c\/p\u003e \u003cp\u003eWhile the Eibach Pro-Kit makes your car sportier and more comfortable, safety and ride quality remain our top priorities. That’s why our suspension engineers and experts develop these springs to meet the highest safety standards. The Pro-Kit lowering springs are perfectly tuned to your stock dampers, ensuring compatibility with electronic damper adjustment systems.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Kit-Fahrwerksfedern-768x432.webp?v=1771917366\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-KIT-EN-2048x738_7a078f4b-27d8-42e4-8eb7-433dcf8cb608.webp?v=1771916922\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003eStock\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/stock-wheel-graphic-768x226.webp?v=1771917133\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eThe OEM’s design their suspension to appeal to the masses. They leave lots of room for improvements in handling, responsiveness and “get-rid-of-the-fender-gap” appearance that every enthusiast wants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003ePro-kit\u003c\/h1\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/prokit-wheel-graphic-768x226_07480690-5977-410d-b67f-ec4668b2b8a2.webp?v=1771917225\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will instantly notice the significant improvement in handling, braking and responsiveness. At the same time, PRO-KIT retains the same comfort level as stock.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,20,170\u003c\/li\u003e\u003cli\u003eAxle-Load Front: 1120 kg\u003c\/li\u003e\u003cli\u003eAxle-Load Rear: 1150 kg\u003c\/li\u003e\u003cli\u003eLowering Front Approx.: 30-40 mm\u003c\/li\u003e\u003cli\u003eLowering Rear Approx.: 30 mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624815292757,"sku":"E10-85-041-02-22","price":269.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_03b38ccf-e96d-4a2b-ba73-11ce4f035613.webp?v=1771909373"},{"product_id":"eibach-pro-kit-for-vw-golf-sportsvan-am1-an1-20-tdi-0214-e10-85-041-03-22","title":"Eibach Pro-Kit for VW GOLF SPORTSVAN (AM1, AN1) 2.0 TDI 02.14 - (E10-85-041-03-22)","description":"\u003cp\u003eThe Eibach Pro-Kit is an effective solution to enhance the driving dynamics of your production vehicle. Lowering your car with our springs not only improves its sporty and comfortable driving feel but also highlights it visually.\u003c\/p\u003e \u003cp\u003eEnjoy a noticeably enhanced driving experience and improved handling thanks to reduced body roll during acceleration, minimized cornering lean, and decreased nosedive under braking.\u003c\/p\u003e \u003cp\u003eWhile the Eibach Pro-Kit makes your car sportier and more comfortable, safety and ride quality remain our top priorities. That’s why our suspension engineers and experts develop these springs to meet the highest safety standards. The Pro-Kit lowering springs are perfectly tuned to your stock dampers, ensuring compatibility with electronic damper adjustment systems.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Kit-Fahrwerksfedern-768x432.webp?v=1771917366\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-KIT-EN-2048x738_7a078f4b-27d8-42e4-8eb7-433dcf8cb608.webp?v=1771916922\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003c\/p\u003e \u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003eStock\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/stock-wheel-graphic-768x226.webp?v=1771917133\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eThe OEM’s design their suspension to appeal to the masses. They leave lots of room for improvements in handling, responsiveness and “get-rid-of-the-fender-gap” appearance that every enthusiast wants.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch1 class=\"elementor-heading-title elementor-size-default\"\u003ePro-kit\u003c\/h1\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/prokit-wheel-graphic-768x226_07480690-5977-410d-b67f-ec4668b2b8a2.webp?v=1771917225\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou will instantly notice the significant improvement in handling, braking and responsiveness. At the same time, PRO-KIT retains the same comfort level as stock.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,18,20,171\u003c\/li\u003e\u003cli\u003eAxle-Load Front: 1120 kg\u003c\/li\u003e\u003cli\u003eAxle-Load Rear: 1050 kg\u003c\/li\u003e\u003cli\u003eLowering Front Approx.: 30-40 mm\u003c\/li\u003e\u003cli\u003eLowering Rear Approx.: 30 mm\u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624815325525,"sku":"E10-85-041-03-22","price":262.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_b7bee050-0636-4299-b2d3-18db9d3d870a.webp?v=1771909374"},{"product_id":"eibach-pro-tronic-for-vw-golf-sportsvan-am1-an1-alle-motorisierungen-all-motorisation-0214-am65-15-021-01-22","title":"Eibach Pro-Tronic for VW GOLF SPORTSVAN (AM1, AN1) Alle Motorisierungen \/ all motorisation 02.14 - (AM65-15-021-01-22)","description":"\u003cp\u003eThe Eibach Pro-Tronic deactivation kits disable the standard damper control and prevent error messages. Naturally, the functions of other control and regulation systems remain intact, ensuring continued safety. Eibach Pro-Tronic is also compatible with suspension systems from other manufacturers, including OE sport suspensions.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Pro-Tronic.webp?v=1771489865\"\u003e\u003cbr\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/PRO-TRONIC-EN-1-2048x738.webp?v=1771492280\"\u003e\u003cbr\u003e\u003ch2\u003eSpecification\u003c\/h2\u003e\u003cli\u003eNotes: A,175\u003c\/li\u003e\u003cli\u003eAdjustable Front: 2-Adjustable\u003c\/li\u003e\u003cli\u003eAdjustable Rear: Not Adjustable\u003c\/li\u003e\u003cli\u003eAxle-Load Front: \u003c\/li\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":52624954786133,"sku":"AM65-15-021-01-22","price":411.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_0911b56c-6c9e-4dc4-a3f7-0ee52f5b1e80.webp?v=1771911812"},{"product_id":"h-r-performance-lowering-springs-28840-7","title":"H\u0026R Performance Lowering Springs - 28840-7","description":"\u003cp\u003eH\u0026amp;R Sport Springs are engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested at H\u0026amp;R’s facility in Lennestadt, Germany, they are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty appearance and lowered centre of gravity\u003c\/li\u003e\n\u003cli\u003eLinear or progressive spring design (depending on application)\u003c\/li\u003e\n\u003cli\u003eCompatible with OE and aftermarket shock absorbers\u003c\/li\u003e\n\u003cli\u003eImproved handling characteristics\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eEngineered, manufactured and tested in Germany\u003c\/li\u003e\n\u003cli\u003ePowder-coated for enhanced appearance and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Twist-beam Rear Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eVehicles fitted with BMW M-Technic, MB-Sportsline, Audi Sportsuspension etc. will show less lowering as they are already factory lowered.\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOSPORTFEDERN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A04.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54427494056277,"sku":"28840-7","price":297.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Sportfedern_1bf23ca3-40f9-4f70-af0b-b83f53ae108d.webp?v=1787179428"},{"product_id":"h-r-performance-lowering-springs-28840-8","title":"H\u0026R Performance Lowering Springs - 28840-8","description":"\u003cp\u003eH\u0026amp;R Sport Springs are engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested at H\u0026amp;R’s facility in Lennestadt, Germany, they are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty appearance and lowered centre of gravity\u003c\/li\u003e\n\u003cli\u003eLinear or progressive spring design (depending on application)\u003c\/li\u003e\n\u003cli\u003eCompatible with OE and aftermarket shock absorbers\u003c\/li\u003e\n\u003cli\u003eImproved handling characteristics\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eEngineered, manufactured and tested in Germany\u003c\/li\u003e\n\u003cli\u003ePowder-coated for enhanced appearance and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Twist-beam Rear Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eVehicles fitted with BMW M-Technic, MB-Sportsline, Audi Sportsuspension etc. will show less lowering as they are already factory lowered.\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOSPORTFEDERN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A04.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54427494089045,"sku":"28840-8","price":297.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Sportfedern_e9a0e453-f0fa-4f0c-b8e9-0e8af0e9b263.webp?v=1787179425"},{"product_id":"h-r-trak-wheel-spacers-0655571","title":"H\u0026R TRAK+® Wheel Spacers - 0655571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eThese spacers without a double-sided centering are only useable for cars with a sufficient length of the centering to be able to center the wheels enough despite the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428499837269,"sku":"0655571","price":58.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DROHNEZ_9cad27a3-c502-459e-a634-3eefe6bc6eb4.webp?v=1787209833"},{"product_id":"h-r-trak-wheel-spacers-1055571","title":"H\u0026R TRAK+® Wheel Spacers - 1055571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003e28.) Only for the rear axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eOnly for cars up to 930 kg wheel load.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eThese spacers without a double-sided centering are only useable for cars with a sufficient length of the centering to be able to center the wheels enough despite the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428503343445,"sku":"1055571","price":58.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DROHNEZ_da473a7a-51fe-449c-9f45-29b39955dd9f.webp?v=1787209848"},{"product_id":"h-r-trak-wheel-spacers-1655573","title":"H\u0026R TRAK+® Wheel Spacers - 1655573","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot usable with steel-rims!\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428508815701,"sku":"1655573","price":78.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRMITZ_9013b9d5-f774-4f32-b8e7-c7fae406ea0c.webp?v=1787209870"},{"product_id":"h-r-trak-wheel-spacers-2055573a","title":"H\u0026R TRAK+® Wheel Spacers - 2055573A","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eNote 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428510552405,"sku":"2055573A","price":91.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRMITZ_1d4bd7ac-d35e-4030-a57e-7d6e4da786ab.webp?v=1787209878"},{"product_id":"h-r-trak-wheel-spacers-2055573b","title":"H\u0026R TRAK+® Wheel Spacers - 2055573B","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eNote 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428510650709,"sku":"2055573B","price":91.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRMITZ_cca65474-1b6c-413a-822d-a711cf30e37d.webp?v=1787209880"},{"product_id":"h-r-trak-wheel-spacers-2455571","title":"H\u0026R TRAK+® Wheel Spacers - 2455571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eNote 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428512780629,"sku":"2455571","price":98.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRMITZ_25fd5c8d-6677-413d-9f51-2532b21e3072.webp?v=1787209887"},{"product_id":"h-r-trak-wheel-spacers-3055571","title":"H\u0026R TRAK+® Wheel Spacers - 3055571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428514910549,"sku":"3055571","price":104.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRMITZ_872b6cbd-ce3b-4225-8263-ce94b50f159d.webp?v=1787209897"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-55573-08","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - 55573-08","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428523528533,"sku":"55573-08","price":128.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DR-ABEMITZSET_811d6ea9-f6ec-411f-806b-aebdf2e9d2cf.webp?v=1787209925"},{"product_id":"h-r-trak-wheel-spacers-b0655571","title":"H\u0026R TRAK+® Wheel Spacers - B0655571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eThese spacers without a double-sided centering are only useable for cars with a sufficient length of the centering to be able to center the wheels enough despite the spacer.\u003cbr\u003eNote 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428528935253,"sku":"B0655571","price":58.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DROHNEZ_40c157e0-d3b3-4b9c-9ea1-ba343b941739.webp?v=1787209944"},{"product_id":"h-r-trak-wheel-spacers-b1055571","title":"H\u0026R TRAK+® Wheel Spacers - B1055571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003e28.) Only for the rear axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eOnly for cars up to 930 kg wheel load.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eThese spacers without a double-sided centering are only useable for cars with a sufficient length of the centering to be able to center the wheels enough despite the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428530573653,"sku":"B1055571","price":58.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DROHNEZ_cf4af153-e3b0-4a84-921d-7513bd8d5b3b.webp?v=1787209951"},{"product_id":"h-r-trak-wheel-spacers-b1655573","title":"H\u0026R TRAK+® Wheel Spacers - B1655573","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428532244821,"sku":"B1655573","price":78.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRMITZ_fa1da7e8-ed5e-485a-8816-06a86d647668.webp?v=1787209960"},{"product_id":"h-r-trak-wheel-spacers-b2055573a","title":"H\u0026R TRAK+® Wheel Spacers - B2055573A","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eNote 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428533686613,"sku":"B2055573A","price":91.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRMITZ_902e76b2-a71a-47cb-b5ff-e8c1aa2f7202.webp?v=1787209964"},{"product_id":"h-r-trak-wheel-spacers-b2055573b","title":"H\u0026R TRAK+® Wheel Spacers - B2055573B","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eNote 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428533784917,"sku":"B2055573B","price":91.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRMITZ_e8c67584-6271-49ce-a95f-e0f411e16556.webp?v=1787209968"},{"product_id":"h-r-trak-wheel-spacers-b2455571","title":"H\u0026R TRAK+® Wheel Spacers - B2455571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003cbr\u003eNote 18b: For the usage of these spacers certain specific technical requierements need to be fulfilled! Please check product information document TRAK_HINWEISE.pdf note 18b!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428535783765,"sku":"B2455571","price":98.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRMITZ_2f61c654-0676-4d29-9b32-5970ad021049.webp?v=1787209978"},{"product_id":"h-r-trak-wheel-spacers-b3055571","title":"H\u0026R TRAK+® Wheel Spacers - B3055571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428537749845,"sku":"B3055571","price":104.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRMITZ_b39f110f-dbe7-4d8e-8490-ddac44277664.webp?v=1787209983"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-b55573-08","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - B55573-08","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eOnly for the front axle.\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428546695509,"sku":"B55573-08","price":128.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DR-ABEMITZSET_684d373e-0376-417d-b0b7-f8858f7b9ffe.webp?v=1787210009"},{"product_id":"h-r-anti-roll-bar-33851-1","title":"H\u0026R Anti-Roll Bar - 33851-1","description":"\u003cp\u003eMade of high-tensile steel with precision-forged ends, powder coating and composite rubber bearings, H\u0026amp;R Anti-Roll Bars ensure the highest quality and durability. Most feature a multi-hole end to adjust the self-steering behaviour (over-\/understeer) of the vehicle. They reduce body roll and increase agility with minimal loss of comfort, and are compatible with all OEM and sport suspension systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-tensile steel with precision-forged ends\u003c\/li\u003e\n\u003cli\u003ePowder coating and composite rubber bearings\u003c\/li\u003e\n\u003cli\u003eOver-\/understeer adjustable (multi-hole ends)\u003c\/li\u003e\n\u003cli\u003eLess body roll, higher agility\u003c\/li\u003e\n\u003cli\u003eMinimal loss of comfort\u003c\/li\u003e\n\u003cli\u003eDeveloped and made in Germany\u003c\/li\u003e\n\u003cli\u003eDelivered with approval or ABE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e Part Type Approval (PTA)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWhen fitting H\u0026amp;R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/InfoStabilisatoren.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X001A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X002A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/TTG33851.pdf\" target=\"_blank\" rel=\"noopener\"\u003eType approval (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428589293909,"sku":"33851-1","price":240.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/STABI-EINZELN_e947a9f4-f3c2-4ad8-8266-be5670346e75.webp?v=1787210285"},{"product_id":"h-r-anti-roll-bar-kit-33851-2","title":"H\u0026R Anti-Roll Bar Kit - 33851-2","description":"\u003cp\u003eMade of high-tensile steel with precision-forged ends, powder coating and composite rubber bearings, H\u0026amp;R Anti-Roll Bars ensure the highest quality and durability. Most feature a multi-hole end to adjust the self-steering behaviour (over-\/understeer) of the vehicle. They reduce body roll and increase agility with minimal loss of comfort, and are compatible with all OEM and sport suspension systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-tensile steel with precision-forged ends\u003c\/li\u003e\n\u003cli\u003ePowder coating and composite rubber bearings\u003c\/li\u003e\n\u003cli\u003eOver-\/understeer adjustable (multi-hole ends)\u003c\/li\u003e\n\u003cli\u003eLess body roll, higher agility\u003c\/li\u003e\n\u003cli\u003eMinimal loss of comfort\u003c\/li\u003e\n\u003cli\u003eDeveloped and made in Germany\u003c\/li\u003e\n\u003cli\u003eDelivered with approval or ABE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Multi-link Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e Part Type Approval (PTA)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWhen fitting H\u0026amp;R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not.\u003cbr\u003eFA Anti-Roll Bar may also be used without rear stabilizer. In this case vehicle might tend to understeer. Usage of the RA Anti-Roll Bar as stand alone is not tested or verified.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/InfoStabilisatoren.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X001A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X002A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/TTG33851.pdf\" target=\"_blank\" rel=\"noopener\"\u003eType approval (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428589326677,"sku":"33851-2","price":457.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/STABI-SET_9b2f0c15-237f-4a98-8fb7-2d224263b61f.webp?v=1787210286"},{"product_id":"h-r-anti-roll-bar-33851-3","title":"H\u0026R Anti-Roll Bar - 33851-3","description":"\u003cp\u003eMade of high-tensile steel with precision-forged ends, powder coating and composite rubber bearings, H\u0026amp;R Anti-Roll Bars ensure the highest quality and durability. Most feature a multi-hole end to adjust the self-steering behaviour (over-\/understeer) of the vehicle. They reduce body roll and increase agility with minimal loss of comfort, and are compatible with all OEM and sport suspension systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-tensile steel with precision-forged ends\u003c\/li\u003e\n\u003cli\u003ePowder coating and composite rubber bearings\u003c\/li\u003e\n\u003cli\u003eOver-\/understeer adjustable (multi-hole ends)\u003c\/li\u003e\n\u003cli\u003eLess body roll, higher agility\u003c\/li\u003e\n\u003cli\u003eMinimal loss of comfort\u003c\/li\u003e\n\u003cli\u003eDeveloped and made in Germany\u003c\/li\u003e\n\u003cli\u003eDelivered with approval or ABE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e Part Type Approval (PTA)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWhen fitting H\u0026amp;R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/InfoStabilisatoren.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X001A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X002A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/TTG33851.pdf\" target=\"_blank\" rel=\"noopener\"\u003eType approval (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428589424981,"sku":"33851-3","price":264.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/STABI-EINZELN_e6195801-8840-451d-8f63-66c6de0865a9.webp?v=1787210286"},{"product_id":"h-r-anti-roll-bar-kit-33851-4","title":"H\u0026R Anti-Roll Bar Kit - 33851-4","description":"\u003cp\u003eMade of high-tensile steel with precision-forged ends, powder coating and composite rubber bearings, H\u0026amp;R Anti-Roll Bars ensure the highest quality and durability. Most feature a multi-hole end to adjust the self-steering behaviour (over-\/understeer) of the vehicle. They reduce body roll and increase agility with minimal loss of comfort, and are compatible with all OEM and sport suspension systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-tensile steel with precision-forged ends\u003c\/li\u003e\n\u003cli\u003ePowder coating and composite rubber bearings\u003c\/li\u003e\n\u003cli\u003eOver-\/understeer adjustable (multi-hole ends)\u003c\/li\u003e\n\u003cli\u003eLess body roll, higher agility\u003c\/li\u003e\n\u003cli\u003eMinimal loss of comfort\u003c\/li\u003e\n\u003cli\u003eDeveloped and made in Germany\u003c\/li\u003e\n\u003cli\u003eDelivered with approval or ABE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Multi-link Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e Part Type Approval (PTA)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWhen fitting H\u0026amp;R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not.\u003cbr\u003eFA Anti-Roll Bar may also be used without rear stabilizer. In this case vehicle might tend to understeer. Usage of the RA Anti-Roll Bar as stand alone is not tested or verified.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/InfoStabilisatoren.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X001A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X002A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/TTG33851.pdf\" target=\"_blank\" rel=\"noopener\"\u003eType approval (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428589490517,"sku":"33851-4","price":470.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/STABI-SET_b1573fa5-2300-4abf-a9e2-0f3217dfff41.webp?v=1787210287"},{"product_id":"h-r-anti-roll-bar-kit-33851-5","title":"H\u0026R Anti-Roll Bar Kit - 33851-5","description":"\u003cp\u003eMade of high-tensile steel with precision-forged ends, powder coating and composite rubber bearings, H\u0026amp;R Anti-Roll Bars ensure the highest quality and durability. Most feature a multi-hole end to adjust the self-steering behaviour (over-\/understeer) of the vehicle. They reduce body roll and increase agility with minimal loss of comfort, and are compatible with all OEM and sport suspension systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-tensile steel with precision-forged ends\u003c\/li\u003e\n\u003cli\u003ePowder coating and composite rubber bearings\u003c\/li\u003e\n\u003cli\u003eOver-\/understeer adjustable (multi-hole ends)\u003c\/li\u003e\n\u003cli\u003eLess body roll, higher agility\u003c\/li\u003e\n\u003cli\u003eMinimal loss of comfort\u003c\/li\u003e\n\u003cli\u003eDeveloped and made in Germany\u003c\/li\u003e\n\u003cli\u003eDelivered with approval or ABE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Twist-beam Rear Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e Part Type Approval (PTA)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWhen fitting H\u0026amp;R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not.\u003cbr\u003eFA Anti-Roll Bar may also be used without rear stabilizer. In this case vehicle might tend to understeer. Usage of the RA Anti-Roll Bar as stand alone is not tested or verified.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/InfoStabilisatoren.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-33851-56.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X001A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X002A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/TTG33851.pdf\" target=\"_blank\" rel=\"noopener\"\u003eType approval (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428589556053,"sku":"33851-5","price":566.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/STABI-SET_cb770a03-c166-4555-ace0-8807cd7aa9be.webp?v=1787210293"},{"product_id":"h-r-anti-roll-bar-kit-33851-6","title":"H\u0026R Anti-Roll Bar Kit - 33851-6","description":"\u003cp\u003eMade of high-tensile steel with precision-forged ends, powder coating and composite rubber bearings, H\u0026amp;R Anti-Roll Bars ensure the highest quality and durability. Most feature a multi-hole end to adjust the self-steering behaviour (over-\/understeer) of the vehicle. They reduce body roll and increase agility with minimal loss of comfort, and are compatible with all OEM and sport suspension systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-tensile steel with precision-forged ends\u003c\/li\u003e\n\u003cli\u003ePowder coating and composite rubber bearings\u003c\/li\u003e\n\u003cli\u003eOver-\/understeer adjustable (multi-hole ends)\u003c\/li\u003e\n\u003cli\u003eLess body roll, higher agility\u003c\/li\u003e\n\u003cli\u003eMinimal loss of comfort\u003c\/li\u003e\n\u003cli\u003eDeveloped and made in Germany\u003c\/li\u003e\n\u003cli\u003eDelivered with approval or ABE\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle:\u003c\/strong\u003e Twist-beam Rear Axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e Part Type Approval (PTA)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWhen fitting H\u0026amp;R stabilizers use OE mounting parts if not co-packed. Check that these parts are in a like-new condition; renew them in case they are not.\u003cbr\u003eFA Anti-Roll Bar may also be used without rear stabilizer. In this case vehicle might tend to understeer. Usage of the RA Anti-Roll Bar as stand alone is not tested or verified.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/InfoStabilisatoren.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-33851-56.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X001A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR02-X002A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/TTG33851.pdf\" target=\"_blank\" rel=\"noopener\"\u003eType approval (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428589654357,"sku":"33851-6","price":590.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/STABI-SET_9427378f-7193-467e-a6e8-a6119a5b0480.webp?v=1787210291"},{"product_id":"h-r-cancellation-kit-for-adaptive-shocks-93068-1","title":"H\u0026R Cancellation Kit For Adaptive Shocks - 93068-1","description":"\u003cp\u003eH\u0026amp;R Cancellation Kits are used when a vehicle with electronically regulated shock absorbers is switched to a suspension with conventional shocks. They prevent the error messages that would otherwise arise when passive suspension components are fitted, while the function of the control unit\/ECU remains fully intact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAvoids error messages when changing the suspension\u003c\/li\u003e\n\u003cli\u003eOnly the standard damping control is discontinued — no ECU fault warnings\u003c\/li\u003e\n\u003cli\u003eControl-unit functions fully retained\u003c\/li\u003e\n\u003cli\u003eCan also be used with other manufacturers’ and OE aftermarket suspensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eSuspension:\u003c\/strong\u003e for vehicles with electronic suspension control\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOSTILLLEGUNGSSAETZE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/93068.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eVehicle Fitment\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ctable style=\"width:100%;border-collapse:collapse;margin:0 0 1em;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"padding:6px 10px;border:1px solid #ddd;background:#f5f5f5;text-align:left;font-weight:600;\"\u003eMake\u003c\/th\u003e\n\u003cth style=\"padding:6px 10px;border:1px solid #ddd;background:#f5f5f5;text-align:left;font-weight:600;\"\u003eModel\u003c\/th\u003e\n\u003cth style=\"padding:6px 10px;border:1px solid #ddd;background:#f5f5f5;text-align:left;font-weight:600;\"\u003eChassis\u003c\/th\u003e\n\u003cth style=\"padding:6px 10px;border:1px solid #ddd;background:#f5f5f5;text-align:left;font-weight:600;\"\u003eModels\u003c\/th\u003e\n\u003cth style=\"padding:6px 10px;border:1px solid #ddd;background:#f5f5f5;text-align:left;font-weight:600;\"\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eBMW\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eX5\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eG05\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eM50d, M50i, M60i, xDrive25d, xDrive30d, xDrive40d, xDrive40i, xDrive45e, xDrive50e\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2018–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eBMW\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eX5 M\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eF95\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eM50d, M50i, M60i, xDrive25d, xDrive30d, xDrive40d, xDrive40i, xDrive45e, xDrive50e\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2018–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eBMW\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eX6\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eG06\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eBMW\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eX6 M\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eF96\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAudi\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eQ2\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eGAB, GAG\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2016–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAudi\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eQ3\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eF3B\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2018–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAudi\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eA3 Sportback\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e8YA, 8YF\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAudi\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eQ3 Sportback\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eF3N\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAudi\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eA3\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e8YS, 8YM\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAudi\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eQ4 E-Tron Sportback\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eF4N\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2021–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAudi\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eQ4 E-Tron Suv\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eF4B\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2021–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eGolf VII\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e5G1, BQ1, BE1, BE2\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2012–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eGolf VII Variant\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eBA5, BV5\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2013–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eGolf Sportsvan VII\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAM1, AN1\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003ePassat B8\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e3G2, CB2\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2014–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003ePassat B8 Variant\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e3G5, CB5\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2014–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eTouran\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e5T1\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2015–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eTiguan\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAD1, AX1\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2016–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eArteon\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e3H7, 3H8\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2017–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eT-Roc\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eA11, D11\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2017–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eGolf VIII\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eCD1, DA1\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eID.3\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eE11, E12\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eT-Roc Cabriolet\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAC7, AC8\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eArteon Shooting Brake\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e3H9\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eGolf VIII Variant\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eCG5, DB5\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eID.4\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eE21\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eVolkswagen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eMultivan T7\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSTM, STN\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2021–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSeat\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eLeon\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e5F1\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2012–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSeat\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eLeon ST\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e5F8\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2012–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSeat\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eLeon SC\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e5F5\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2013–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSeat\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAteca\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKH7, KHP\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2016–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSeat\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eTarraco\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKN2\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2018–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSeat\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eLeon\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKL1, KLG\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSeat\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eLeon Sportstourer\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKL8, KLD\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eOctavia III\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e5E3, NL3, NR3\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2012–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eOctavia III Combi\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e5E5, 5E6\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2012–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSuperb III\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e3V3\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2015–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSuperb III\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e3V5\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2015–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKodiaq I\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eNS6, NS7, NV7\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2016–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKaroq\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eNU7, ND7\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2017–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eOctavia IV Combi\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eNX5, PV5\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2019–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eEnyaq IV Suv\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e5AZ\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eOctavia IV\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eNX3, NN3, PV3\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eSkoda\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eEnyaq IV Coupe\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e5AC\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2021–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eCupra\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAteca\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKH7, KHP, KBP\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2018–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eCupra\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eFormentor\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKM7, KMP\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eCupra\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eLeon\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKL1, KU1, KUG\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eCupra\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eLeon Sportstourer\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eKL8, KU8, KUD\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2020–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eCupra\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eBorn\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eK11\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eAll models\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e2021–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428612690261,"sku":"93068-1","price":292.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/STILLLEGUNG_86495d60-33f4-4deb-a19f-5bd5614c2900.webp?v=1787210450"},{"product_id":"h-r-trak-wheel-spacers-4055571","title":"H\u0026R TRAK+® Wheel Spacers - 4055571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428701884757,"sku":"4055571","price":111.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRMITZ_f52aa510-339a-4bcb-b46b-7c04062fd4a6.webp?v=1787210895"},{"product_id":"h-r-trak-wheel-spacers-40555712","title":"H\u0026R TRAK+® Wheel Spacers - 40555712","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428701950293,"sku":"40555712","price":137.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRA_80dacbda-7c52-4372-973f-ea0b6b09412e.webp?v=1787210897"},{"product_id":"h-r-trak-wheel-spacers-4455571","title":"H\u0026R TRAK+® Wheel Spacers - 4455571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428714500437,"sku":"4455571","price":144.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRA_4275ca1a-6d86-4092-adc5-e5c4ba8a3c7e.webp?v=1787210935"},{"product_id":"h-r-trak-wheel-spacers-5055571","title":"H\u0026R TRAK+® Wheel Spacers - 5055571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428721807701,"sku":"5055571","price":144.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRA_a2e79d9c-5006-4907-b2a3-ae6f3cdcf5e4.webp?v=1787210998"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-55573-10a","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - 55573-10A","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428726755669,"sku":"55573-10A","price":128.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DR-ABEMITZSET_abac0cdb-fd2d-4c93-b59a-ca27c765c9f2.webp?v=1787211033"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-55573-12","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - 55573-12","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428726788437,"sku":"55573-12","price":133.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DR-ABEMITZSET_a0128eac-a8a2-4ee6-9394-0befe4b3950d.webp?v=1787211031"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-55573-15","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - 55573-15","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428726853973,"sku":"55573-15","price":139.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DR-ABEMITZSET_7ad85057-452c-4941-aba1-d316ef3496f7.webp?v=1787211032"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-55573-20","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - 55573-20","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428726886741,"sku":"55573-20","price":149.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DR-ABEMITZSET_313b17ed-7ebf-4c19-913d-c2cc4219ac3b.webp?v=1787211033"},{"product_id":"h-r-trak-wheel-spacers-6055571","title":"H\u0026R TRAK+® Wheel Spacers - 6055571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428743237973,"sku":"6055571","price":151.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRA_2847aa8b-3e4b-4054-b6ff-ee292378757c.webp?v=1787211089"},{"product_id":"h-r-trak-wheel-spacers-b4055571","title":"H\u0026R TRAK+® Wheel Spacers - B4055571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428766273877,"sku":"B4055571","price":111.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRMITZ_3615ac06-8614-4546-9b47-bf5540389b72.webp?v=1787211298"},{"product_id":"h-r-trak-wheel-spacers-b40555712","title":"H\u0026R TRAK+® Wheel Spacers - B40555712","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428766306645,"sku":"B40555712","price":137.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRA_4b8bc1d7-4d69-4ba4-966e-37ea002252a7.webp?v=1787211297"},{"product_id":"h-r-trak-wheel-spacers-b4455571","title":"H\u0026R TRAK+® Wheel Spacers - B4455571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428767289685,"sku":"B4455571","price":144.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRA_a7cf0b90-0593-4c5c-8488-4babf74ac369.webp?v=1787211311"},{"product_id":"h-r-trak-wheel-spacers-b5055571","title":"H\u0026R TRAK+® Wheel Spacers - B5055571","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428769091925,"sku":"B5055571","price":144.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRA_548255c1-3a91-4e6b-ba3a-f12af486921b.webp?v=1787211331"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-b55573-10a","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - B55573-10A","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428771418453,"sku":"B55573-10A","price":128.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DR-ABEMITZSET_e6c1012f-88a1-4d40-ae90-042e40b2e114.webp?v=1787211350"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-b55573-12","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - B55573-12","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428771451221,"sku":"B55573-12","price":133.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DR-ABEMITZSET_31cb5f38-c994-4b1d-ae28-c3e1008eca8c.webp?v=1787211353"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-b55573-15","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - B55573-15","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428771483989,"sku":"B55573-15","price":139.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DR-ABEMITZSET_fd2dabd3-22d8-4c4d-96a7-e2b8d08d6358.webp?v=1787211349"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-b55573-20","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - B55573-20","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 112\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot for Leon X-Perience\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428771582293,"sku":"B55573-20","price":149.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DR-ABEMITZSET_13e6b44c-dd11-4495-b1ca-905b27913976.webp?v=1787211350"}],"url":"https:\/\/shop.regalautosport.com\/collections\/vw-am-golf-sportsvan.oembed?page=3","provider":"Regal Autosport","version":"1.0","type":"link"}