{"title":"VW T5 California","description":null,"products":[{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-20-tdi-0510-0815","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.0 TDI 05\/10→08\/15","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.0 TDI\u003c\/li\u003e\u003cli\u003eBuild Year: 05\/10→08\/15\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52108589597013,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_33f22b49-3c40-422d-9a97-0fd7037e0f7c.webp?v=1766032863"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-20-tdi-0511-0815","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.0 TDI 05\/11→08\/15","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.0 TDI\u003c\/li\u003e\u003cli\u003eBuild Year: 05\/11→08\/15\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52108589629781,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_b1307ebe-4048-49ef-8551-420dc35e2bdc.webp?v=1766032863"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-20-tdi-4motion-0110-0815","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.0 TDI 4motion 01\/10→08\/15","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.0 TDI 4motion\u003c\/li\u003e\u003cli\u003eBuild Year: 01\/10→08\/15\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52108589695317,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_704486cc-c771-4a8f-a46e-b930e955c0ac.webp?v=1766032865"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-20-tdi-4motion-1009-0815","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.0 TDI 4motion 10\/09→08\/15","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.0 TDI 4motion\u003c\/li\u003e\u003cli\u003eBuild Year: 10\/09→08\/15\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52108589760853,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_b7086458-e41d-47fc-8205-ecd3776ca238.webp?v=1766032866"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-20-tdi-4motion-0510-0815","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.0 TDI 4motion 05\/10→08\/15","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.0 TDI 4motion\u003c\/li\u003e\u003cli\u003eBuild Year: 05\/10→08\/15\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52108589793621,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_d1c20804-1159-478f-b57b-b3f957853695.webp?v=1766032867"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-20-tsi-0511-0815","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.0 TSI 05\/11→08\/15","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.0 TSI\u003c\/li\u003e\u003cli\u003eBuild Year: 05\/11→08\/15\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52108589826389,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_b5c25fca-2fae-4f1a-8302-92b104a404e8.webp?v=1766032868"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-20-tsi-0712-0815","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.0 TSI 07\/12→08\/15","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.0 TSI\u003c\/li\u003e\u003cli\u003eBuild Year: 07\/12→08\/15\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52108589859157,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_6051c0ed-ce57-4e76-8af2-23e14fbe6fd4.webp?v=1766032870"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-20-tsi-4motion-0711-0815","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.0 TSI 4motion 07\/11→08\/15","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.0 TSI 4motion\u003c\/li\u003e\u003cli\u003eBuild Year: 07\/11→08\/15\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52108589891925,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_6ecc2d17-d1aa-49dc-bcbf-3230b77a8d63.webp?v=1766032871"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-19-tdi-0507-1109","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 1.9 TDI 05\/07→11\/09","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 1.9 TDI\u003c\/li\u003e\u003cli\u003eBuild Year: 05\/07→11\/09\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52117785280853,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_beefc062-116b-417a-b0b5-2a8f9d1c0a51.webp?v=1766114912"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-20-tdi-0909-0815","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.0 TDI 09\/09→08\/15","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.0 TDI\u003c\/li\u003e\u003cli\u003eBuild Year: 09\/09→08\/15\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52117785313621,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_ff5ced93-403e-43ff-a930-7e16a000a234.webp?v=1766114915"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-25-tdi-0507-1109","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.5 TDi 05\/07→11\/09","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.5 TDi\u003c\/li\u003e\u003cli\u003eBuild Year: 05\/07→11\/09\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52117785346389,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_2350cb20-cc60-481a-8801-0b95cc452539.webp?v=1766114916"},{"product_id":"pagid-street-rear-axle-set-for-vw-california-t5-camper-7ec-7ef-7eg-7hf-25-tdi-4motion-0507-1109","title":"PAGID STREET+ Rear Axle Set for VW CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF) 2.5 TDI 4motion 05\/07→11\/09","description":"\u003cp\u003eSimilarly to PAGID Racing brake pads, STREET+ by PAGID Racing employs a dual retention system, with an adhesive bond and a unique mechanical system.\u003c\/p\u003e\u003cp\u003eThe mechanical system on STREET+ by PAGID Racing consists of a crimped backplate interface to friction material, ensuring an enhanced bonding between friction material and the backplate.\u003c\/p\u003e\u003ch2\u003eApplication Range\u003c\/h2\u003e \u003cp\u003eHigh performance brake pads for road and street. Due to excellent performance and modulation characteristics also applicable on track days. The friction compound was approved on the race track and on the Eifel streets.\u003c\/p\u003e \u003cp\u003eEven 18 hot laps on the Bilster Berg, driven by professional race driver Benjamin Leuchter were no problem at all for these premium brake pads.\u003c\/p\u003e\u003ch2\u003eVehicle-Specific Fitment\u003c\/h2\u003e\u003cli\u003eManufacturer: VW\u003c\/li\u003e\u003cli\u003eModel: CALIFORNIA T5 Camper (7EC, 7EF, 7EG, 7HF)\u003c\/li\u003e\u003cli\u003eType: 2.5 TDI 4motion\u003c\/li\u003e\u003cli\u003eBuild Year: 05\/07→11\/09\u003c\/li\u003e\u003cli\u003eAxle Position: Rear\u003c\/li\u003e\u003ch2\u003eTechnical Features\u003c\/h2\u003e\u003cli\u003eUnique double retention system with know-how transfer from racing \u003c\/li\u003e\u003cli\u003eUriction material is mechanically fixed to the backplate \u003c\/li\u003e\u003cli\u003eNo delamination of friction material from steel backplate \u003c\/li\u003e\u003cli\u003eMotorsport high-tech and innovation for your vehicle\u003c\/li\u003e\u003ch2\u003eBedding-in Guidance\u003c\/h2\u003e\u003cp\u003eThe first braking procedures of approx. 20 brakings, should be carried out gently and carefully, from a max. speed of 50 km\/h.\u003c\/p\u003e \u003cp\u003eAs second step, 15 - 20 braking procedures from a medium speed and medium pressure (50% of an emergency braking pressure) is necessary, allowing cooling time for the brakes in between brakings to avoid thermal shock.\u003c\/p\u003e \u003cp\u003eFinally, use a moderate driving style and avoid any unnecessary, hard or continuous braking for the first 300 km.\u003c\/p\u003e \u003ch2\u003eCaution:\u003c\/h2\u003e \u003cp\u003eThe procedure should be only carried out on sections of the road that permit these manoeuvres to be carried out in a safe manner. Exessive braking can cause the friction material to overheat too quickly, resulting in the brake pad surface to glaze over and affect the overall braking performance during this process.\u003c\/p\u003e\u003ch2\u003eIncluded:\u003c\/h2\u003eRear Axle Set","brand":"PAGID","offers":[{"title":"Default Title","offer_id":52117785379157,"sku":"T8027SP2001","price":146.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/download_fcecb118-f7f2-4b8e-9e5e-670562be4fe0.webp?v=1766114919"},{"product_id":"h-r-performance-lowering-springs-29270-1","title":"H\u0026R Performance Lowering Springs - 29270-1","description":"\u003cp\u003eH\u0026amp;R Sport Springs are engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested at H\u0026amp;R’s facility in Lennestadt, Germany, they are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty appearance and lowered centre of gravity\u003c\/li\u003e\n\u003cli\u003eLinear or progressive spring design (depending on application)\u003c\/li\u003e\n\u003cli\u003eCompatible with OE and aftermarket shock absorbers\u003c\/li\u003e\n\u003cli\u003eImproved handling characteristics\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eEngineered, manufactured and tested in Germany\u003c\/li\u003e\n\u003cli\u003ePowder-coated for enhanced appearance and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOSPORTFEDERN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A04.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54427808072021,"sku":"29270-1","price":328.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Sportfedern_b457d947-a20d-4650-b3f9-b78b9dbe460d.webp?v=1787180431"},{"product_id":"h-r-performance-lowering-springs-29270-2","title":"H\u0026R Performance Lowering Springs - 29270-2","description":"\u003cp\u003eH\u0026amp;R Sport Springs are engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested at H\u0026amp;R’s facility in Lennestadt, Germany, they are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty appearance and lowered centre of gravity\u003c\/li\u003e\n\u003cli\u003eLinear or progressive spring design (depending on application)\u003c\/li\u003e\n\u003cli\u003eCompatible with OE and aftermarket shock absorbers\u003c\/li\u003e\n\u003cli\u003eImproved handling characteristics\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eEngineered, manufactured and tested in Germany\u003c\/li\u003e\n\u003cli\u003ePowder-coated for enhanced appearance and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOSPORTFEDERN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A04.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54427808104789,"sku":"29270-2","price":328.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Sportfedern_d36298d4-cb24-43a2-8c89-5fe86b3d46b4.webp?v=1787180432"},{"product_id":"h-r-performance-lowering-springs-29270-3","title":"H\u0026R Performance Lowering Springs - 29270-3","description":"\u003cp\u003eH\u0026amp;R Sport Springs are engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested at H\u0026amp;R’s facility in Lennestadt, Germany, they are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty appearance and lowered centre of gravity\u003c\/li\u003e\n\u003cli\u003eLinear or progressive spring design (depending on application)\u003c\/li\u003e\n\u003cli\u003eCompatible with OE and aftermarket shock absorbers\u003c\/li\u003e\n\u003cli\u003eImproved handling characteristics\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eEngineered, manufactured and tested in Germany\u003c\/li\u003e\n\u003cli\u003ePowder-coated for enhanced appearance and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOSPORTFEDERN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A04.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54427808465237,"sku":"29270-3","price":328.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Sportfedern_dac1e258-591f-404b-b707-a57158287ac1.webp?v=1787180432"},{"product_id":"h-r-performance-lowering-springs-29270-4","title":"H\u0026R Performance Lowering Springs - 29270-4","description":"\u003cp\u003eH\u0026amp;R Sport Springs are engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested at H\u0026amp;R’s facility in Lennestadt, Germany, they are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSporty appearance and lowered centre of gravity\u003c\/li\u003e\n\u003cli\u003eLinear or progressive spring design (depending on application)\u003c\/li\u003e\n\u003cli\u003eCompatible with OE and aftermarket shock absorbers\u003c\/li\u003e\n\u003cli\u003eImproved handling characteristics\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eEngineered, manufactured and tested in Germany\u003c\/li\u003e\n\u003cli\u003ePowder-coated for enhanced appearance and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOSPORTFEDERN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A04.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54427808956757,"sku":"29270-4","price":328.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/Sportfedern_a7e0da1a-5782-47a4-af1d-8ab2372d3895.webp?v=1787180434"},{"product_id":"h-r-cup-kit-comfort-suspension-40270-1","title":"H\u0026R Cup-Kit Comfort-Suspension - 40270-1","description":"\u003cp\u003eH\u0026amp;R Cup-Kits combine H\u0026amp;R’s famous Sport Springs with precisely calibrated shock absorbers. Choose the Comfort version, which closely approximates the OEM ride, or the Sport version for those who prefer a firmer ride and increased handling performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHarmonised, matched components\u003c\/li\u003e\n\u003cli\u003eOEM-quality shortened shock absorbers\u003c\/li\u003e\n\u003cli\u003eSpecial spring characteristics\u003c\/li\u003e\n\u003cli\u003eImproved handling\u003c\/li\u003e\n\u003cli\u003ePrecision-wound Sport Springs lower the ride height\u003c\/li\u003e\n\u003cli\u003eAdjustable damping (depending on application)\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eShock absorbers also available separately\u003c\/li\u003e\n\u003cli\u003eEngineered and manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eOnly for cars with cylindrical struct clamp!\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003cbr\u003eNote DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).\u003cbr\u003e2Cup-Kit shock absorbers: Use OE bump-stop, spring-cup and dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.\u003cbr\u003eDepending on engine, gearbox\/transmission, equipment vehicle tolerances lowering may differ from the values given.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOCUP-KIT.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A03.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X280A03.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428340027733,"sku":"40270-1","price":787.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/40270-x_0b91d4dd-8ce4-40dd-92b0-a32410efef93.webp?v=1787181913"},{"product_id":"h-r-cup-kit-comfort-suspension-40270-2","title":"H\u0026R Cup-Kit Comfort-Suspension - 40270-2","description":"\u003cp\u003eH\u0026amp;R Cup-Kits combine H\u0026amp;R’s famous Sport Springs with precisely calibrated shock absorbers. Choose the Comfort version, which closely approximates the OEM ride, or the Sport version for those who prefer a firmer ride and increased handling performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHarmonised, matched components\u003c\/li\u003e\n\u003cli\u003eOEM-quality shortened shock absorbers\u003c\/li\u003e\n\u003cli\u003eSpecial spring characteristics\u003c\/li\u003e\n\u003cli\u003eImproved handling\u003c\/li\u003e\n\u003cli\u003ePrecision-wound Sport Springs lower the ride height\u003c\/li\u003e\n\u003cli\u003eAdjustable damping (depending on application)\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eShock absorbers also available separately\u003c\/li\u003e\n\u003cli\u003eEngineered and manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eOnly for cars with cylindrical struct clamp!\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003cbr\u003eNote DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).\u003cbr\u003e2Cup-Kit shock absorbers: Use OE bump-stop, spring-cup and dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.\u003cbr\u003eDepending on engine, gearbox\/transmission, equipment vehicle tolerances lowering may differ from the values given.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOCUP-KIT.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A03.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X280A03.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428340126037,"sku":"40270-2","price":787.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/40270-x_789c641f-5bdf-48d8-af55-ba1f7262c457.webp?v=1787181913"},{"product_id":"h-r-cup-kit-comfort-suspension-40270-3","title":"H\u0026R Cup-Kit Comfort-Suspension - 40270-3","description":"\u003cp\u003eH\u0026amp;R Cup-Kits combine H\u0026amp;R’s famous Sport Springs with precisely calibrated shock absorbers. Choose the Comfort version, which closely approximates the OEM ride, or the Sport version for those who prefer a firmer ride and increased handling performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHarmonised, matched components\u003c\/li\u003e\n\u003cli\u003eOEM-quality shortened shock absorbers\u003c\/li\u003e\n\u003cli\u003eSpecial spring characteristics\u003c\/li\u003e\n\u003cli\u003eImproved handling\u003c\/li\u003e\n\u003cli\u003ePrecision-wound Sport Springs lower the ride height\u003c\/li\u003e\n\u003cli\u003eAdjustable damping (depending on application)\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eShock absorbers also available separately\u003c\/li\u003e\n\u003cli\u003eEngineered and manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eOnly for cars with cylindrical struct clamp!\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003cbr\u003eNote DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).\u003cbr\u003e2Cup-Kit shock absorbers: Use OE bump-stop, spring-cup and dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.\u003cbr\u003eDepending on engine, gearbox\/transmission, equipment vehicle tolerances lowering may differ from the values given.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOCUP-KIT.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A03.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X280A03.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428340224341,"sku":"40270-3","price":787.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/40270-x_f5d10e2b-f708-4557-9574-e1c4fbd9fc7b.webp?v=1787181913"},{"product_id":"h-r-cup-kit-comfort-suspension-40270-4","title":"H\u0026R Cup-Kit Comfort-Suspension - 40270-4","description":"\u003cp\u003eH\u0026amp;R Cup-Kits combine H\u0026amp;R’s famous Sport Springs with precisely calibrated shock absorbers. Choose the Comfort version, which closely approximates the OEM ride, or the Sport version for those who prefer a firmer ride and increased handling performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHarmonised, matched components\u003c\/li\u003e\n\u003cli\u003eOEM-quality shortened shock absorbers\u003c\/li\u003e\n\u003cli\u003eSpecial spring characteristics\u003c\/li\u003e\n\u003cli\u003eImproved handling\u003c\/li\u003e\n\u003cli\u003ePrecision-wound Sport Springs lower the ride height\u003c\/li\u003e\n\u003cli\u003eAdjustable damping (depending on application)\u003c\/li\u003e\n\u003cli\u003eDelivered with ABE or type approval\u003c\/li\u003e\n\u003cli\u003eShock absorbers also available separately\u003c\/li\u003e\n\u003cli\u003eEngineered and manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate, with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eOnly for cars with cylindrical struct clamp!\u003cbr\u003eWith and without adaptive suspension. For dynamic-and\/or sport-suspension.  Except bad road suspension\u003cbr\u003eNote DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).\u003cbr\u003e2Cup-Kit shock absorbers: Use OE bump-stop, spring-cup and dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.\u003cbr\u003eDepending on engine, gearbox\/transmission, equipment vehicle tolerances lowering may differ from the values given.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOCUP-KIT.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A03.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X280A03.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428340355413,"sku":"40270-4","price":787.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/40270-x_845cc11b-6af4-4ac9-a2f9-846227e8deed.webp?v=1787181922"},{"product_id":"h-r-monotube-coil-overs-29267-5","title":"H\u0026R Monotube Coil Overs - 29267-5","description":"\u003cp\u003eH\u0026amp;R Coil Overs provide dynamic handling combined with superb ride quality. Threaded shock bodies and rear-axle height adjustment allow a great stance within the approved range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-quality components for long durability\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R precision-wound coil springs in high-strength spring steel\u003c\/li\u003e\n\u003cli\u003eHigh-quality gas-pressure shock absorbers in Monotube or Twin-Tube design\u003c\/li\u003e\n\u003cli\u003eRugged trapezoidal thread for height adjustment\u003c\/li\u003e\n\u003cli\u003eThreaded tubes zinc-phosphate coated or stainless steel\u003c\/li\u003e\n\u003cli\u003eMostly with aluminium rear-axle height adjustment\u003c\/li\u003e\n\u003cli\u003eAdjustable damping on some applications\u003c\/li\u003e\n\u003cli\u003eAdjustment wrenches included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering front axle (mm):\u003c\/strong\u003e 50–80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering rear axle (mm):\u003c\/strong\u003e 40–70\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspension:\u003c\/strong\u003e for vehicles without bad road version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eFA damping force ajustable\u003cbr\u003eOnly for cars with cylindrical struct clamp!\u003cbr\u003eNote DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).\u003cbr\u003eThe minimum clearance between tires and suspension\/body parts is 5 mm. If the clearance is less than 5 mm, it has to be restored with wheel spacers or reworking thebodywork. This bodywork and\/or arising costs are not covered by H\u0026amp;R.\u003cbr\u003eLowering beyond the dimensions given in the type approval may result in damage. These damages are not covered by H\u0026amp;R.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOGEWINDEFAHRWERKE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X115A02.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X249A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428436267349,"sku":"29267-5","price":1309.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/29267-5.webp?v=1787182232"},{"product_id":"h-r-monotube-coil-overs-29267-6","title":"H\u0026R Monotube Coil Overs - 29267-6","description":"\u003cp\u003eH\u0026amp;R Coil Overs provide dynamic handling combined with superb ride quality. Threaded shock bodies and rear-axle height adjustment allow a great stance within the approved range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-quality components for long durability\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R precision-wound coil springs in high-strength spring steel\u003c\/li\u003e\n\u003cli\u003eHigh-quality gas-pressure shock absorbers in Monotube or Twin-Tube design\u003c\/li\u003e\n\u003cli\u003eRugged trapezoidal thread for height adjustment\u003c\/li\u003e\n\u003cli\u003eThreaded tubes zinc-phosphate coated or stainless steel\u003c\/li\u003e\n\u003cli\u003eMostly with aluminium rear-axle height adjustment\u003c\/li\u003e\n\u003cli\u003eAdjustable damping on some applications\u003c\/li\u003e\n\u003cli\u003eAdjustment wrenches included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering front axle (mm):\u003c\/strong\u003e 50–80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowering rear axle (mm):\u003c\/strong\u003e 40–70\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspension:\u003c\/strong\u003e for vehicles without bad road version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eFA damping force ajustable\u003cbr\u003eOnly for cars with struct clamp braket!\u003cbr\u003eNote DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).\u003cbr\u003eThe minimum clearance between tires and suspension\/body parts is 5 mm. If the clearance is less than 5 mm, it has to be restored with wheel spacers or reworking thebodywork. This bodywork and\/or arising costs are not covered by H\u0026amp;R.\u003cbr\u003eLowering beyond the dimensions given in the type approval may result in damage. These damages are not covered by H\u0026amp;R.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/INFOGEWINDEFAHRWERKE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X002A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X115A02.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/HR01-X249A01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428436365653,"sku":"29267-6","price":1309.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/29267-6.webp?v=1787182229"},{"product_id":"h-r-trak-wheel-spacers-3075650","title":"H\u0026R TRAK+® Wheel Spacers - 3075650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428686057813,"sku":"3075650","price":104.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRMITZ_be3c5dd2-8afd-4e3f-abda-1a58884bfe08.webp?v=1787210829"},{"product_id":"h-r-trak-wheel-spacers-4075650","title":"H\u0026R TRAK+® Wheel Spacers - 4075650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428713386325,"sku":"4075650","price":111.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRMITZ_40a58be1-bc87-44fe-acbe-8855904859e5.webp?v=1787210920"},{"product_id":"h-r-trak-wheel-spacers-4275650","title":"H\u0026R TRAK+® Wheel Spacers - 4275650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 21\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003cbr\u003e44. The original wheel screws have to be replaced with shorter ones. These are included in delivery! When using aftermarket wheels with non-original screws, shorter ones have to be used!\u003cbr\u003eDifferentiation T6 and T6.1: T6 Typ 7HC   Type approval number: e1*2001\/116*0220*36-54 T6 Typ 7HMA  Type approval number: e1*2001\/116*0289*25-43 T6 Typ 7J0   Type approval number: e1*2007\/46*0130*16-31  T6.1 Typ 7HC   Type approval number: e1*2001\/116*0220*55-… T6.1 Typ 7HMA  Type approval number: e1*2001\/116*0289*44-… T6.1 Typ 7J0   Type approval number: e1*2007\/46*0130*32-…\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428713910613,"sku":"4275650","price":160.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRA_9ac70e09-16b9-4e76-953a-2d0551eca9d8.webp?v=1787210925"},{"product_id":"h-r-trak-wheel-spacers-5075650","title":"H\u0026R TRAK+® Wheel Spacers - 5075650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003cbr\u003e44. The original wheel screws have to be replaced with shorter ones. These are included in delivery! When using aftermarket wheels with non-original screws, shorter ones have to be used!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428724461909,"sku":"5075650","price":160.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRA_fbe7f0b0-abfb-4fc6-be79-dc5ecb20e82c.webp?v=1787211019"},{"product_id":"h-r-trak-wheel-spacers-6075650","title":"H\u0026R TRAK+® Wheel Spacers - 6075650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428746678613,"sku":"6075650","price":160.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DRA_41faf196-ead8-49f1-a721-f3c42e385706.webp?v=1787211108"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-75650-15","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - 75650-15","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eDifferentiation T6 and T6.1: T6 Typ 7HC   Type approval number: e1*2001\/116*0220*36-54 T6 Typ 7HMA  Type approval number: e1*2001\/116*0289*25-43 T6 Typ 7J0   Type approval number: e1*2007\/46*0130*16-31  T6.1 Typ 7HC   Type approval number: e1*2001\/116*0220*55-… T6.1 Typ 7HMA  Type approval number: e1*2001\/116*0289*44-… T6.1 Typ 7J0   Type approval number: e1*2007\/46*0130*32-…\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428749398357,"sku":"75650-15","price":185.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DR-ABEMITZSET_0dda15be-8720-42e5-b39b-42c42e6a2025.webp?v=1787211148"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-75650-20","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - 75650-20","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eDifferentiation T6 and T6.1: T6 Typ 7HC   Type approval number: e1*2001\/116*0220*36-54 T6 Typ 7HMA  Type approval number: e1*2001\/116*0289*25-43 T6 Typ 7J0   Type approval number: e1*2007\/46*0130*16-31  T6.1 Typ 7HC   Type approval number: e1*2001\/116*0220*55-… T6.1 Typ 7HMA  Type approval number: e1*2001\/116*0289*44-… T6.1 Typ 7J0   Type approval number: e1*2007\/46*0130*32-…\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428749431125,"sku":"75650-20","price":191.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/2DR-ABEMITZSET_51f03655-d414-4c14-a65d-95647bc67543.webp?v=1787211149"},{"product_id":"h-r-trak-wheel-spacers-b3075650","title":"H\u0026R TRAK+® Wheel Spacers - B3075650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428759982421,"sku":"B3075650","price":104.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRMITZ_79907148-e248-431e-8ed6-8976655bc12c.webp?v=1787211270"},{"product_id":"h-r-trak-wheel-spacers-b4075650","title":"H\u0026R TRAK+® Wheel Spacers - B4075650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDR = The wheel spacer should be fitted between the wheel and the axial hub using longer bolts not supplied - please order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.\u003cbr\u003eAll DR-Systems require longer wheel-bolts. These have to be ordered separately. When ordering wheel-bolts please follow these guidelines: If possible name the type of the wheel when ordering. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12\/d24 mm, for M14\/d28 mm Round-head for M12\/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN\/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1\/2\"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428766667093,"sku":"B4075650","price":111.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRMITZ_20ffb425-348d-4530-9b38-5043060ed038.webp?v=1787211305"},{"product_id":"h-r-trak-wheel-spacers-b4275650","title":"H\u0026R TRAK+® Wheel Spacers - B4275650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 21\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003cbr\u003e44. The original wheel screws have to be replaced with shorter ones. These are included in delivery! When using aftermarket wheels with non-original screws, shorter ones have to be used!\u003cbr\u003eDifferentiation T6 and T6.1: T6 Typ 7HC   Type approval number: e1*2001\/116*0220*36-54 T6 Typ 7HMA  Type approval number: e1*2001\/116*0289*25-43 T6 Typ 7J0   Type approval number: e1*2007\/46*0130*16-31  T6.1 Typ 7HC   Type approval number: e1*2001\/116*0220*55-… T6.1 Typ 7HMA  Type approval number: e1*2001\/116*0289*44-… T6.1 Typ 7J0   Type approval number: e1*2007\/46*0130*32-…\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428766994773,"sku":"B4275650","price":160.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRA_473960d3-a6cc-4f68-b7eb-dabefb4b99b1.webp?v=1787211308"},{"product_id":"h-r-trak-wheel-spacers-b5075650","title":"H\u0026R TRAK+® Wheel Spacers - B5075650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003cbr\u003e44. The original wheel screws have to be replaced with shorter ones. These are included in delivery! When using aftermarket wheels with non-original screws, shorter ones have to be used!\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428770238805,"sku":"B5075650","price":160.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRA_528736e6-3ffd-4415-ab60-2a94855c1c73.webp?v=1787211336"},{"product_id":"h-r-trak-wheel-spacers-b6075650","title":"H\u0026R TRAK+® Wheel Spacers - B6075650","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with TÜV® certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eDRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included!\u003cbr\u003eThe original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DRA.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428774400341,"sku":"B6075650","price":160.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DRA_ae0f18de-a2fd-4c1e-9117-ed861fea9a6d.webp?v=1787211385"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-b75650-15","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - B75650-15","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003cbr\u003eDifferentiation T6 and T6.1: T6 Typ 7HC   Type approval number: e1*2001\/116*0220*36-54 T6 Typ 7HMA  Type approval number: e1*2001\/116*0289*25-43 T6 Typ 7J0   Type approval number: e1*2007\/46*0130*16-31  T6.1 Typ 7HC   Type approval number: e1*2001\/116*0220*55-… T6.1 Typ 7HMA  Type approval number: e1*2001\/116*0289*44-… T6.1 Typ 7J0   Type approval number: e1*2007\/46*0130*32-…\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428784329045,"sku":"B75650-15","price":185.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DR-ABEMITZSET_3c6cfa1c-5bbf-440d-b335-baca8fdc3aeb.webp?v=1787211402"},{"product_id":"h-r-trak-wheel-spacers-w-ger-cert-b75650-20","title":"H\u0026R TRAK+® Wheel Spacers W. Ger. Cert. - B75650-20","description":"\u003cp\u003eH\u0026amp;R TRAK+ wheel spacers push the wheels outward to improve stance, track width and clearance. Precision-machined and hub-centric for a perfect, vibration-free fit. Please note the correct bolt\/cone type and length — longer wheel bolts are required for DR-system spacers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproved stance and wider track\u003c\/li\u003e\n\u003cli\u003eHub-centric, precision-machined\u003c\/li\u003e\n\u003cli\u003eApplication-specific fitment\u003c\/li\u003e\n\u003cli\u003eTÜV-certified versions available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M14x1,5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness (mm):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack widening per axle (mm):\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of holes:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt hole circle Ø (mm):\u003c\/strong\u003e 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistration:\u003c\/strong\u003e with General Operating Permit (ABE)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note additional information and vehicle-specific technical notes!\u003cbr\u003eSystem DR-ABE: The spacer is fitted between the wheel and the hub with longer wheel-screws.\u003cbr\u003eNot usable with steel-rims!\u003cbr\u003eNote 31: Wheel spacers with ABE are only useable for the original wheels shown in the ABE which is enclosed in the delivery. For special wheel\/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.\u003cbr\u003eThe set contains: 2 spacers, 10 longer wheel screws incl. 2 wheel lock screws.\u003cbr\u003eDifferentiation T6 and T6.1: T6 Typ 7HC   Type approval number: e1*2001\/116*0220*36-54 T6 Typ 7HMA  Type approval number: e1*2001\/116*0289*25-43 T6 Typ 7J0   Type approval number: e1*2007\/46*0130*16-31  T6.1 Typ 7HC   Type approval number: e1*2001\/116*0220*55-… T6.1 Typ 7HMA  Type approval number: e1*2001\/116*0289*44-… T6.1 Typ 7J0   Type approval number: e1*2007\/46*0130*32-…\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.h-r.com\/bin\/SystemDR-ABE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct information (PDF)\u003c\/a\u003e · \u003ca href=\"https:\/\/www.h-r.com\/bin\/EBH-DR.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":54428784361813,"sku":"B75650-20","price":191.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/3327\/0357\/files\/B2DR-ABEMITZSET_3f4c8b3b-64fe-435b-94a5-05488b780633.webp?v=1787211409"},{"product_id":"h-r-height-adjustable-spring-kit-23016-2","title":"H\u0026R Height Adjustable Spring Kit - 23016-2","description":null,"brand":"Regal Autosport","offers":[{"title":"Default Title","offer_id":54434168013141,"sku":"23016-2","price":0.0,"currency_code":"GBP","in_stock":true}]}],"url":"https:\/\/shop.regalautosport.com\/collections\/vw-t5-california.oembed","provider":"Regal Autosport","version":"1.0","type":"link"}