• Blow Off Valve and Kit for Audi, VW, SEAT, and Skoda
  • Blow Off Valve and Kit for Audi, VW, SEAT, and Skoda
  • Blow Off Valve and Kit for Audi, VW, SEAT, and Skoda

Blow Off Valve and Kit for Audi, VW, SEAT, and Skoda

£172.46
£204.74
£172.46
Shipping calculated at checkout.
  • Direct OEM replacement
  • Made from the highest quality Aircraft quality T6061 billet aluminium construction
  • Fully compatible with OEM electronics
  • Fully serviceable piston
  • Capable to 600HP (with uprated spring kit)
  • Utilising world leading springs for more precise operation and consistency
  • All internal and external components have been made in the UK
  • Pistons use heat stabilised Viton O-rings
  • Lubricated with high temperature Mobil1 grease
  • Fully serviceable and rebuildable in minutes
  • Unlike other valves on the market, ours produce no check engine lights (EML)
  • Improved dynamic throttle response
  • Consistent turbo boost & reduced turbo lag
  • Covered by the Forge Lifetime Warranty*

 

This valve is designed to fit the FSI and TSI engines of the VAG group (VW, Audi, Seat, Skoda) listed below, including the 2011-2013 2.0l engine using the IHI Turbo.

  • 1.4T (with additional fitting kit FMBGFK3)
  • 1.8T
  • 2.0T

Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB. We designed the slots in the body to cover a large surface area, allowing for a quick release of air, resulting in a unique sounding dumpvalve.

 

This upgrade/replacement for your original equipment valve integrates seamlessly with the OEM electronics. Using a wiring harness and solenoid, both tested for each specific application, you can confidentially fit a Forge part knowing that there will be no fault codes, check engine lights, or performance issues with the vehicle!

Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable.

The OEM valve uses a rubber diaphragm and a plastic housing. Both of these materials, but especially the rubber is prone to failure. The rubber can stiffen and go brittle due to the heat from the engine, resulting in diaphragm splitting and boost leak.

Our valve uses full billet alloy construction with a piston based internal design, meaning the issues with the OEM can never happen with ours! To give you even more peace of mind, we made the internals of our valve serviceable. We recommend doing this every 3 years or 20,000 miles, whichever comes first. However, if you don’t want to service your valve yourself you can order the kit and ship your valve back to us and we will carry out the service free of charge! Simply contact us to arrange the service!

The OEM valve internals can also fail if you have your vehicle mapped as the rubber diaphragm is not always strong enough to cope with the increased boost pressure. We build our valves with a spring matched to the original pressure of the car, but include in the kit a spring strong enough to cope with a stage one remap. If you decide to increase the power even more you can guarantee the reliability of our valve by using this spring tuning kit!

This valve was designed by our highly skilled engineers using CAD software to ensure that it will fit with every listed compatible vehicle with ease! 

It is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis. Compared to competitors our valve has a much shorter overall installed height.

The OEM part numbers we have replaced with our valve include:

  • 06H145710B
  • 06H145710C
  • 06H145710D
  • 06H145710F
  • 06H145710G

However, this original equipment valve is used over a multitude of vehicles. Please see our compatible vehicle list to confirm. 

⭐ Amazing product very well made. Don’t spend your money anywhere else the noise this gives off is fantastic. Can’t recommend enough ⭐

⭐ Easy to install, sounds great instructions easy to follow. Would highly recommend ⭐

⭐ Great quality product installed on a 2008 Audi TTS. Easy install, directions for install and packaging is top quality, noise is produces is 2nd to none ⭐

What are the delivery methods and charges for UK, Europe and Rest of World (ROW)?


Regal Autosport uses a variety of shipping services to give the best combination of value, service and speed to our customers. This will vary on location, value of the time and size to name a few.


Regal Autosport may drop-ship directly from the manufacturer to the customer if the product is a non-stock item and this provides the best value and service. If this is the case, the delivery method may be different.


Shipping is calculated automatically at the checkout, depending on your location and the products ordered. On occasion, the shipping price may be incorrect due to your location or the product being oversized in dimension or weight. Whilst we try to be as accurate as possible with our shipping prices, from time to time they might be inaccurate. We will not know until we process your order if this is the case, we will contact you if this is the case and provide you with the option of cancelling or payment of the difference.


Due to the value of the products sold we only deliver to the verified address of any payment method OR any address if paid for by bank transfer. Thanks to scammers, we simply do not take the risk and any order which does not have a verified address will be cancelled.


Any customer with an order which has been damaged in transit must notify Regal Autosport immediately and within 14 calendar days of shipping. If this is not done, the shipping insurance cannot be used, and you will not be compensated. 


United Kingdom Mainland


Within the United Kingdom Mainland, we use DPD Local. This service is a next working day service. For orders which are in-stock and make the 2PM same-day shipping cut-off, they will be delivered the following working day. A working day is Monday - Friday only.


Tracking is automatically sent to your email address or mobile address or both once the order has been processed for shipping. You will then typically receive a 1-hour delivery window on the day.


United Kingdom Non-Mainland 

Within the United Kingdom Non-Mainland, we use DPD Local. This service is a next working day or 2 working day service. For orders which are in-stock and make the 2PM same-day shipping cut-off, they will be delivered the following working day or the second working day. A working day is Monday - Friday only. 


Europe 

For Europe, we use DHL. Your delivery location will determine the transit time. Orders in-stock and placed before 2PM will ship the same working day. A working day is Monday - Friday only. 


Tracking is automatically sent to your email address or mobile address or both once the order has been processed for shipping. You will then be able to track your order and see an estimated delivery date. 


Tracking is automatically sent to your email address or mobile address or both once the order has been processed for shipping. You will then typically receive a 1-hour delivery window on the day. 


Rest of World (ROW) & Oversize 


For ROW and oversize items, we typically use DHL Express. Your delivery location will determine the transit time. Orders in-stock and placed before 2 PM will ship the same working day. A working day is Monday - Friday only. 


Tracking is manually sent to your email address once your order has been processed for shipping. You will then be able to track your order and see an estimated delivery date. 


Please note: The above is a general guide to how we plan to ship your order. From time to time this may change and we may decide to ship with other couriers.