• Engine Oil Cooler for the Audi RS4 4.2 (B7 2006-2008)
  • Engine Oil Cooler for the Audi RS4 4.2 (B7 2006-2008)

Engine Oil Cooler for the Audi RS4 4.2 (B7 2006-2008)

£816.66
£901.38
£816.66
Shipping calculated at checkout.

This kit has been designed to address the weakness of the stock oil cooler – the cooler fitted to your car from Audi is aluminium, but the fittings on the ends of the cooler hoses are steel. The result is corrosion between the two different metals which cracks the fittings over time, causing a slow oil leak that gets worse with age, and eventually ends in a catastrophic failure of the oil cooler lines - and if you are unlucky, the engine too.

Due to the corrosion setting in on the lines, they usually cannot be removed from the oil cooler without damaging it. This results in the need for the oil cooler and both lines to be replaced at a cost of over £1100 from the dealer, before you factor in consumables and labour to change the parts.

Our solution uses tried and test products. It is a full replacement right from the fitting on the engine block which is precision made from 6082 billet aluminium, and then anodised to prevent any possibility of corrosion.

This fitting leads to -12 AN Hose Technik black anodised aluminium fittings on Hose Technik braided lines with black overbraid.

Cooling is accomplished by a 19 row Setrab oil cooler, the same manufacturer that supplies Audi and several F1 teams, again with a black finish. All the mating parts are similar materials and are tried and tested in Motorsport - there is no fear of corrosion affecting the fittings after a few years of use. The cooler is supported on a laser cut and powder coated frame that also holds the Audi fan control module in place. With everything finished in black, it makes for the ultimate stealth installation and unless you know what you are looking for, you won’t see it.

The original remit of this replacement was to do away with all the troublesome Audi parts, which this kit accomplishes, but by relocating the oil cooler slightly higher than stock, we have also reduced the chances of damage from road debris.

All parts needed for installation are included - bolts, nuts, washers, brackets, and full instructions, though you will need up to additional 2 litres of engine oil to account for the loss from removing your old oil cooler, and for filling the new cooler and lines.

What are the delivery methods and charges for UK, Europe and Rest of World (ROW)?


Regal Autosport uses a variety of shipping services to give the best combination of value, service and speed to our customers. This will vary on location, value of the time and size to name a few.


Regal Autosport may drop-ship directly from the manufacturer to the customer if the product is a non-stock item and this provides the best value and service. If this is the case, the delivery method may be different.


Shipping is calculated automatically at the checkout, depending on your location and the products ordered. On occasion, the shipping price may be incorrect due to your location or the product being oversized in dimension or weight. Whilst we try to be as accurate as possible with our shipping prices, from time to time they might be inaccurate. We will not know until we process your order if this is the case, we will contact you if this is the case and provide you with the option of cancelling or payment of the difference.


Due to the value of the products sold we only deliver to the verified address of any payment method OR any address if paid for by bank transfer. Thanks to scammers, we simply do not take the risk and any order which does not have a verified address will be cancelled.


Any customer with an order which has been damaged in transit must notify Regal Autosport immediately and within 14 calendar days of shipping. If this is not done, the shipping insurance cannot be used, and you will not be compensated. 


United Kingdom Mainland


Within the United Kingdom Mainland, we use DPD Local. This service is a next working day service. For orders which are in-stock and make the 2PM same-day shipping cut-off, they will be delivered the following working day. A working day is Monday - Friday only.


Tracking is automatically sent to your email address or mobile address or both once the order has been processed for shipping. You will then typically receive a 1-hour delivery window on the day.


United Kingdom Non-Mainland 

Within the United Kingdom Non-Mainland, we use DPD Local. This service is a next working day or 2 working day service. For orders which are in-stock and make the 2PM same-day shipping cut-off, they will be delivered the following working day or the second working day. A working day is Monday - Friday only. 


Europe 

For Europe, we use DHL. Your delivery location will determine the transit time. Orders in-stock and placed before 2PM will ship the same working day. A working day is Monday - Friday only. 


Tracking is automatically sent to your email address or mobile address or both once the order has been processed for shipping. You will then be able to track your order and see an estimated delivery date. 


Tracking is automatically sent to your email address or mobile address or both once the order has been processed for shipping. You will then typically receive a 1-hour delivery window on the day. 


Rest of World (ROW) & Oversize 


For ROW and oversize items, we typically use DHL Express. Your delivery location will determine the transit time. Orders in-stock and placed before 2 PM will ship the same working day. A working day is Monday - Friday only. 


Tracking is manually sent to your email address once your order has been processed for shipping. You will then be able to track your order and see an estimated delivery date. 


Please note: The above is a general guide to how we plan to ship your order. From time to time this may change and we may decide to ship with other couriers.